参数资料
型号: DV164039
厂商: Microchip Technology
文件页数: 41/64页
文件大小: 0K
描述: KIT DEV PIC24FJ256DA210
产品培训模块: Intro to PIC24FJDA Family
视频文件: PIC24FJ256DA210 Development Board Overview
标准包装: 1
系列: dsPIC™
类型: MCU
适用于相关产品: PIC24FJ256DA210
所含物品: 开发板,显示板,3 个裸板,MPLAB ICD-3,线缆,电源
Development Board Hardware
4.4.3.2
UART AND DISPLAY BACKLIGHT (RX SIGNAL)
The UART’s RX signal is mapped to only one pin (RD0) of the microcontroller. This pin
is also used by the development board to optionally control the backlight for the display
daughter board; all functions are multiplexed through the same jumper, JP12. If either
of the backlight control options is selected, the UART becomes unavailable to the exter-
nal RS-232 port.
4.4.4
Graphics Port
The PIC24FJ256DA210 Development Board can support TFT, MSTN and CSTN
displays. Displays of 4, 8 and 16-bit data widths are supported. The 64-pin display Con-
nector V1 (J3) (on the right hand side bottom corner of the board) is provided for con-
nection of Microchip display boards.
4.4.4.1
TFT AND STN INTERFACES
When developing applications using TFT displays and the Graphics Display Prototype
Board, the 16-bit display bus can be used to send 16-bit RGB data (5-6-5 bits respec-
tively) to a standard 24-bit (8-8-8) or 18-bit (6-6-6) RGB display. To do this, color data
from the microcontroller is mapped to the Most Significant bits (MSbs) of the display.
The Least Significant bit lines of the display (3-2-3 for 24-bit displays, 1-0-1 for 18-bit)
are then tied to the MSb. This technique allows full brightness whenever the MSb is ‘ 1 ’,
and full blackness when the MSb is ‘ 0 ’. The controller-to-display data mapping is
detailed in Table 4-5.
TABLE 4-5:
RGB INTERFACE MAPPING FOR TFT DISPLAYS
Graphics Data Pins (GDx)
RED
GD<15:11>
GD<15>
GREEN
GD<10:5>
GD<10>
BLUE
GD<4:0>
GD<4>
4.4.4.2
STN INTERFACES
18-Bit RGB Display
(6-6-6)
Red<5:1>
Red<0>
Green<5:0>
Green<5>
Blue<5:1>
Blue<0>
24-Bit RGB Display
(8-8-8)
Red<7:3>
Red<2:0>
Green<7:2>
Green<1:0>
Blue<7:3>
Blue<2:0>
The development board can directly interface with STN displays (both CSTN and
MSTN) of 4, 8 or 16-bit data width. The mapping of graphics data to the display data
input is described in Table 4-6. Configuration of the different data widths is done by the
graphics controller module through the register interface. Refer to the
“ PIC24FJ256DA210 Family Data Sheet” (DS39969) for more information.
TABLE 4-6:
STN INTERFACE MAPPING
Graphics Data Pins (GDx)
GD<3:0>
GD<7:4>
GD<15:8>
? 2010 Microchip Technology Inc.
4-bit
M<3:0>
Unused
Unused
8-bit
M<3:0>
M<7:4>
Unused
16-bit
M<3:0>
M<7:4>
M<15:8>
DS51911A-page 41
相关PDF资料
PDF描述
DV164101 KIT DEV PICKIT1 FLASH 8/14PIN
DV164120 KIT STARTER PICKIT 2
DV164121 KIT PICKIT 2 DEBUG EXPRESS
DV164122 ANALYZER SRL PICKIT W/DEMO BOARD
DV164131 KIT STARTER PICKIT 3
相关代理商/技术参数
参数描述
DV164101 功能描述:开发板和工具包 - PIC / DSPIC PICkit 1 8/14P Flash RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DV164101 制造商:Microchip Technology Inc 功能描述:TOOLS: FLASH MICROCONTROLLER (
DV164102 功能描述:开发板和工具包 - 无线 rfPICkit RoHS:否 制造商:Arduino 产品:Evaluation Boards 工具用于评估:AT32UC3L 核心:AVR32 频率: 接口类型:USB 工作电源电压:5 V
DV164120 功能描述:电路内置调试器 PICkit 2 8/14/20P Flash RoHS:否 制造商:Microchip Technology 产品:In-Circuit Debugger Kits 工具用于评估:PIC MCUs, dsPIC DSCs 用于:07-00024, AC164113 核心:dsPIC, PIC 接口类型:USB 工作电源电压:3 V to 5 V
DV164121 功能描述:电路内置调试器 PICkit 2 Debug Express RoHS:否 制造商:Microchip Technology 产品:In-Circuit Debugger Kits 工具用于评估:PIC MCUs, dsPIC DSCs 用于:07-00024, AC164113 核心:dsPIC, PIC 接口类型:USB 工作电源电压:3 V to 5 V