- 您现在的位置：买卖IC网 > PDF目录20525 > ER3-512 (TechTools)EMULATOR EPROM ECONOROM III 512K PDF资料下载
参数资料
| 型号： | ER3-512 |
| 厂商： | TechTools |
| 文件页数： | 10/24页 |
| 文件大小： | 0K |
| 描述： | EMULATOR EPROM ECONOROM III 512K |
| 标准包装： | 1 |
| 系列： | EconoROM™ III |
| 类型： | 存储器 |
| 适用于相关产品： | EPROMs |
| 所含物品： | ER3 EconoROM III 仿真器，线缆（菊花链、LPT 和目标）等 |
| 配用： | CBL08-25-ND - 25 FT DOWNLOAD CABLE UPGRADE C32D-6-ND - 6" TARGET CABLE IDC TO 32PIN DIP C28D-6-ND - 6" TARGET CABLE IDC TO 28PIN DIP PS-RT1-ND - EXTERNAL PWR SUPPLY |
| 其它名称： | ER3512 |
Using External Power
Connect the external power supply but leave the target turned off. The emulator status LED should glow a
STEADY RED, indicating the presence of emulator power but not target power. If not, disconnect the
emulator power and refer to the troubleshooting tips below to correct the problem before continuing.
-
-
-
-
Verify the external power supply is properly connected and plugged into a powered socket.
Verify the external power supply is providing a regulated 5VDC at 300ma or more.
Verify the external power supply is wired correctly (center is positive, ring is ground).
Disconnect the target cable and re-apply emulator power. If the LED now GLOWS RED, the
target wiring, adapters or cabling are incorrect.
Turn on target power. The emulator status LED should change from a steady RED GLOW to a steady
GREEN GLOW. If not, refer to the troubleshooting tips below before continuing.
LED Turns OFF:
Something is VERY wrong with the target wiring, cables or adapters.
Immediately turn off target power and then emulator
power. Correct the problem before reapplying power!
LED STAYS RED:
The emulator did not sense at least 3V from the target power pins.
- Verify all target cable connections
- Verify the target cable is plugged in correctly (pin 1 orientation)
- Verify that any adapters you might be using are the correct pin-outs.
LED Flashes GREEN:
The emulator detected the target’s power, but the reset line is not properly connected. When the emulator is
first powered up, it asserts RESET to keep the target from running until it has received a download. The
flashing GREEN LED indicates target activity.
- Verify the RESET line is connected
- Verify your selection of the RESET attachment point
- Verify your selection of RESET polarity.
Econo ROM III User’s Manual
6
Copyright ? 2000, TechTools
相关PDF资料 |
PDF描述 |
|---|---|
| LXD40-0700SW | POWER SUPPLY LED 40W 700MA DIM |
| MAX5062CASA+T | IC MOSFET DRIVER 8-SOIC |
| VE-B2T-CW-F2 | CONVERTER MOD DC/DC 6.5V 100W |
| MAX628ESA+ | IC DRIVER MOSFET DUAL 8-SOIC |
| LQH32MN391J23L | INDUCTOR 390UH 5% 50MA 1210 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ER35-3C90 | 制造商:FERROXCUBE 制造商全称:Ferroxcube International Holding B.V. 功能描述:ER cores |
| ER35-3C94 | 制造商:FERROXCUBE 制造商全称:Ferroxcube International Holding B.V. 功能描述:ER cores |
| ER35BEIGE | 制造商:IMO Precision Controls Ltd 功能描述:TERMINAL BLOCK FEED THRU 35MM |
| ER35BEIGE | 制造商:IMO Precision Controls Ltd 功能描述:TERMINAL FEED THROUGH 35MM |
| ER35PBEIGE | 制造商:IMO Precision Controls Ltd 功能描述:TERMINAL BLOCK DIN SCREW 35MM 制造商:IMO Precision Controls Ltd 功能描述:TERMINAL BLOCK, DIN, SCREW, 35MM 制造商:IMO 功能描述:TERMINAL BLOCK, DIN, SCREW, 35MM, Connector Type:Terminal Block, DIN Rail, Serie 制造商:IMO Precision Controls Ltd 功能描述:TERMINAL BLOCK, DIN, SCREW, 35MM, Connector Type:Terminal Block, DIN Rail, Series:ER, Connector Mounting:DIN Rail, Pitch Spacing:16mm, No. of Contacts:2, Wire Size AWG Max:0AWG, Contact Plating:Tin, Contact Material:Brass, SVHC:No , RoHS Compliant: Yes |
发布紧急采购，3分钟左右您将得到回复。