- 您现在的位置：买卖IC网 > PDF目录20525 > ER3-512 (TechTools)EMULATOR EPROM ECONOROM III 512K PDF资料下载
参数资料
| 型号： | ER3-512 |
| 厂商： | TechTools |
| 文件页数： | 7/24页 |
| 文件大小： | 0K |
| 描述： | EMULATOR EPROM ECONOROM III 512K |
| 标准包装： | 1 |
| 系列： | EconoROM™ III |
| 类型： | 存储器 |
| 适用于相关产品： | EPROMs |
| 所含物品： | ER3 EconoROM III 仿真器，线缆（菊花链、LPT 和目标）等 |
| 配用： | CBL08-25-ND - 25 FT DOWNLOAD CABLE UPGRADE C32D-6-ND - 6" TARGET CABLE IDC TO 32PIN DIP C28D-6-ND - 6" TARGET CABLE IDC TO 28PIN DIP PS-RT1-ND - EXTERNAL PWR SUPPLY |
| 其它名称： | ER3512 |
Plug the emulator into your target
Turn the target power off. Plug the supplied target interface cable into the target’s EPROM socket. Be
careful to align the PIN 1 end of the cable (designated with a stripe) with the PIN 1 end of the target’s
socket (usually designated with a notch, a dot or a ‘1’).
Econo ROM IIIs ship with both 28pin and 32pin DIP cables. Use the 28pin cable if you are emulating a
28pin DIP device; the 32pin cable if emulating a 32pin DIP device. If you are emulating PLCC type
devices, you will need to purchase a DIP to PLCC adapter. These are available from TechTools as well as
all popular adapter manufacturers.
PLUGGING THE CABLE IN BACKWARDS WILL
DAMAGE Econo ROM III!
The number one cause of emulator failure is reverse voltage. The JEDEC standard pin-out for DIP
devices places power and ground on opposite corners of the device. If one plugs an EPROM or an
EPROM EMULATOR in backwards, it applies reverse voltage to the device or emulator, causing
permanent damage.
If your target uses DIP sockets or a TechTools’ PLCC adapter, it is fairly easy to ensure the cable is
plugged in properly. Simply check (twice) that the RED stripe on the cable is aligned with the PIN 1 end of
the socket.
If you are using any type of adapter between the DIP cable and your target, it can get a little more
confusing. An incorrect adapter or one that is installed incorrectly could apply reverse voltages to the
emulator.
If you have ANY doubts, check it out! The simplest way to check out adapters, is to insert the adapter into
the target but do NOT insert the DIP cable into the adapter. The DIP socket provided by the adapter should
have GROUND on one corner pin and POWER on the opposite corner. On 28 pin sockets, ground should
be on pin 14 and power on pin 28. On 32 pin sockets, ground should be on pin 16 and power on pin 32.
Once you have established that the adapter is wired correctly and installed correctly, then insert the DIP
cable into the adapter, aligning its RED stripe with the PIN 1 end of the DIP socket.
PLUGGING THE CABLE IN BACKWARDS WILL
DAMAGE Econo ROM III!
The old carpenters’ rule applies here: ‘MEASURE twice – CUT once.’
Econo ROM III User’s Manual
3
Copyright ? 2000, TechTools
相关PDF资料 |
PDF描述 |
|---|---|
| LXD40-0700SW | POWER SUPPLY LED 40W 700MA DIM |
| MAX5062CASA+T | IC MOSFET DRIVER 8-SOIC |
| VE-B2T-CW-F2 | CONVERTER MOD DC/DC 6.5V 100W |
| MAX628ESA+ | IC DRIVER MOSFET DUAL 8-SOIC |
| LQH32MN391J23L | INDUCTOR 390UH 5% 50MA 1210 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ER35-3C90 | 制造商:FERROXCUBE 制造商全称:Ferroxcube International Holding B.V. 功能描述:ER cores |
| ER35-3C94 | 制造商:FERROXCUBE 制造商全称:Ferroxcube International Holding B.V. 功能描述:ER cores |
| ER35BEIGE | 制造商:IMO Precision Controls Ltd 功能描述:TERMINAL BLOCK FEED THRU 35MM |
| ER35BEIGE | 制造商:IMO Precision Controls Ltd 功能描述:TERMINAL FEED THROUGH 35MM |
| ER35PBEIGE | 制造商:IMO Precision Controls Ltd 功能描述:TERMINAL BLOCK DIN SCREW 35MM 制造商:IMO Precision Controls Ltd 功能描述:TERMINAL BLOCK, DIN, SCREW, 35MM 制造商:IMO 功能描述:TERMINAL BLOCK, DIN, SCREW, 35MM, Connector Type:Terminal Block, DIN Rail, Serie 制造商:IMO Precision Controls Ltd 功能描述:TERMINAL BLOCK, DIN, SCREW, 35MM, Connector Type:Terminal Block, DIN Rail, Series:ER, Connector Mounting:DIN Rail, Pitch Spacing:16mm, No. of Contacts:2, Wire Size AWG Max:0AWG, Contact Plating:Tin, Contact Material:Brass, SVHC:No , RoHS Compliant: Yes |
发布紧急采购，3分钟左右您将得到回复。