Single Channel, 12-/16-Bit, Serial Input, Current
Source and Voltage Output DACs, HART Connectivity
Data Sheet
Rev. I
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother
rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
2009–2013 Analog Devices, Inc. All rights reserved.
FEATURES
12-/16-bit resolution and monotonicity
Current output ranges: 4 mA to 20 mA, 0 mA to 20 mA,
0 mA to 24 mA
±0.01 % FSR typical total unadjusted error (TUE)
±3 ppm/°C output drift
Voltage output ranges: 0 V to 5 V, 0 V to 10 V, ±5 V, ±10 V
10% overrange
±0.01 % FSR typical total unadjusted error (TUE)
±2 ppm/°C output drift
Flexible serial digital interface
On-chip output fault detection
On-chip reference: 10 ppm/°C maximum
Optional regulated DVCC output
Asynchronous clear function
Power supply range
AVDD: 10.8 V to 40 V
AVSS: 26.4 V to 3 V/0 V
Output loop compliance: AVDD – 2.5 V
Temperature range: 40°C to +85°C
TSSOP and LFCSP packages
APPLICATIONS
Process control
Actuator control
PLC
HART network connectivity (LFCSP package only)
GENERAL DESCRIPTION
12-/16-bit digital-to-analog converters (DAC) offering a pro-
grammable current source and programmable voltage output
designed to meet the requirements of industrial process control
applications.
The output current range is programmable at 4 mA to 20 mA,
0 mA to 20 mA, or an overrange function of 0 mA to 24 mA.
The LFCSP version of this product has a CAP2 pin so that the
HART signals can be coupled onto the current output of the
Voltage output is provided from a separate pin that can be
configured to provide 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V
output ranges; an overrange of 10% is available on all ranges.
Analog outputs are short and open-circuit protected and can
drive capacitive loads of 1 F.
The device operates with an AVDD power supply range from
10.8 V to 40 V. Output loop compliance is 0 V to AVDD 2.5 V.
The flexible serial interface is SPI- and MICROWIRE-
compatible and can be operated in 3-wire mode to minimize
the digital isolation required in isolated applications.
The device also includes a power-on-reset function, ensuring
that the device powers up in a known state. The part also
includes an asynchronous clear pin (CLEAR) that sets the
outputs to zero-scale/midscale voltage output or the low
end of the selected current range.
The total output error is typically ±0.01% in current mode and
±0.01% in voltage mode.
Table 1. Pin-Compatible Devices
Part Number
Description
Single channel, 12-bit, serial
input current source DAC
Single channel, 16-bit, serial
input current source DAC
COMPANION PRODUCTS