- 您现在的位置：买卖IC网 > PDF目录11822 > FT2232HL-TRAY (FTDI, Future Technology Devices International Ltd)IC USB HS DUAL UART/FIFO 64-LQFP PDF资料下载
参数资料
| 型号： | FT2232HL-TRAY |
| 厂商： | FTDI, Future Technology Devices International Ltd |
| 文件页数： | 13/67页 |
| 文件大小： | 0K |
| 描述： | IC USB HS DUAL UART/FIFO 64-LQFP |
| 标准包装： | 160 |
| 系列： | USBmadeEZ-FIFO，FT-X，X-Chip |
| 特点： | USB 至 UART 和（或）FIFO、SPI、I2C、JTAG |
| 通道数： | 2，DUART |
| FIFO's： | 4096 字节 |
| 规程： | RS232，RS422，RS485 |
| 电源电压： | 3 V ~ 3.6 V |
| 带并行端口： | 是 |
| 带自动流量控制功能： | 是 |
| 带调制解调器控制功能： | 是 |
| 带CMOS： | 是 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 64-LQFP |
| 供应商设备封装： | 64-LQFP |
| 包装： | 托盘 |
| 其它名称： | FT2232HL - TRAY |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页当前第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页
Copyright 2012 Future Technology Devices International Limited
20
Document No.: FT_000061
FT2232H DUAL HIGH SPEED USB TO MULTIPURPOSE UART/FIFO IC
Version 2.21
Clearance No.: FTDI#77
4 Function Description
The FT2232H USB 2.0 High Speed (480Mb/s) to UART/FIFO is one of FTDIs 5th generation of Ics. It has
the capability of being configured in a variety of industry standard serial or parallel interfaces.
The FT2232H has two independent configurable interfaces. Each interface can be configured as UART,
FIFO, JTAG, SPI, I2C or bit-bang mode with independent baud rate generators. In addition to these, the
FT2232H supports a host bus emulation mode, a CPU-Style FIFO mode and a fast opto-isolated serial
interface mode.
4.1 Key Features
USB High Speed to Dual Interface. The FT2232H is a USB 2.0 High Speed (480Mbits/s) to dual
independent flexible and configurable parallel/serial interfaces.
Functional Integration. The FT2232H integrates a USB protocol engine which controls the physical
Universal Transceiver Macrocell Interface (UTMI) and handles all aspects of the USB 2.0 High Speed
interface. The FT222H includes an integrated +1.8V Low Drop-Out (LDO) regulator and 12MHz to 480MHz
PLL. It also includes 4kbytes Tx and Rx data buffers per interface. The FT2232H effectively integrates the
entire USB protocol on a chip with no firmware required.
MPSSE.Multi-Purpose Synchronous Serial Engines (MPSSE), capable of speeds up to 30 Mbits/s, provides
flexible synchronous interface configurations.
Data Transfer rate. The FT2232H supports a data transfer rate up to 12 Mbaud when configured as an
RS232/RS422/RS485 UART interface or greater than 25 Mbytes/second over a synchronous parallel FIFO
interface. Please note the FT2232H does not support the baud rates of 7 Mbaud 9 Mbaud, 10 Mbaud and
11 Mbaud.
Latency Timer. This is really a feature of the driver and is used to as a timeout to flush short packets of
data back to the PC. The default is 16ms, but it can be altered between 0ms and 255ms. At 0ms latency
you get a packet transfer on every high speed microframe.
4.2 Functional Block Descriptions
Dual Multi-Purpose UART/FIFO Controllers. The FT2232H has two independent UART/FIFO
Controllers. These control the UART data, 245 fifo data, opto isolation (Fast Serial) or control the Bit-
Bang mode if selected by SETUP command. Each Multi-Purpose UART/FIFO Controller also contain an
MPSSE (Multi Protocol Synchronous Serial Engine) which can be used independently of each other. Using
this MPSSE, the Multi-Purpose UART/FIFO Controller can be configured, under software command, to
have 1 MPSSE + 1 UART / 245 FIFO (each UART / 245 can be set to Bit Bang mode to gain extra I/O if
required) or 2 MPSSE.
USB Protocol Engine and FIFO control. The USB Protocol Engine controls and manages the interface
between the UTMI PHY and the FIFOs of the chip. It also handles power management and the USB
protocol specification.
Dual Port FIFO TX Buffer (4Kbytes per interface). Data from the Host PC is stored in these buffers
to be used by the Multi-purpose UART/FIFO controllers. This is controlled by the USB Protocol Engine and
FIFO control block.
Dual Port FIFO RX Buffer (4Kbytes per interface). Data from the Multi-purpose UART/FIFO
controllers is stored in these blocks to be sent back to the the Host PC when requested. This is controlled
by the USB Protocol Engine and FIFO control block.
RESET Generator – The integrated Reset Generator Cell provides a reliable power-on reset to the device
internal circuitry at power up. The RESET# input pin allows an external device to reset the FT2232H.
RESET# should be tied to VCCIO (+3.3v) if not being used.
Independent Baud Rate Generators – The Baud Rate Generators provides a x16 or a x10 clock input
to the UARTs from a 120MHz reference clock and consists of a 14 bit pre-scaler and 4 register bits which
相关PDF资料 |
PDF描述 |
|---|---|
| SC28L92A1A,512 | IC UART DUAL W/FIFO 44-PLCC |
| VI-B5B-IY | CONVERTER MOD DC/DC 95V 50W |
| D38999/20WD19PC | CONN RCPT 19POS WALL MNT W/PINS |
| ATMEGA169PV-8MCHR | MCU AVR 16KB FLASH 16MHZ 64QFN |
| MS27484T16B8PA | CONN PLUG 8POS STRAIGHT W/PINS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FT2232HMINIMODULE | 制造商:Future Technology Devices International (FTDI Chip) 功能描述:USB Hi-Speed FT2232H Evaluation Module 制造商:Future Technology Devices International (FTDI Chip) 功能描述:USB to serial/FIFO development module |
| FT2232H-MINI-MODULE | 制造商:Future Technology Devices International (FTDI Chip) 功能描述:IC,EVALUATION MODULE;FT2232H;USB HI-SPEED |
| FT2232HQ | 制造商:Future Technology Devices International (FTDI Chip) 功能描述:USB Hi-Speed to Dual Channel Serial UART/FIFO/JTAG/SPI/I2C IC - QFN-64 |
| FT2232HQ_MINI_ MODULE | 功能描述:界面开发工具 USB Hi-Speed FT2232H Evaluation Module RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V |
| FT2232HQ-4000 | 制造商:FTDI 制造商全称:FTDI 功能描述:DUAL HIGH SPEED USB TO MULTIPURPOSE UART/FIFO IC |
发布紧急采购，3分钟左右您将得到回复。