参数资料
型号: FT232HQ-REEL
厂商: FTDI, Future Technology Devices International Ltd
文件页数: 40/65页
文件大小: 0K
描述: IC HS USB TO UART/FIFO 48QFN
应用说明: FT1248 Application Note
标准包装: 1
通道数: 1,UART
FIFO's: 4kb
规程: RS232,RS422,RS485
电源电压: 1.62 V ~ 1.98 V,2.97 V ~ 3.63 V
带并行端口:
带故障启动位检测功能:
带调制解调器控制功能:
安装类型: 表面贴装
封装/外壳: 48-VFQFN 裸露焊盘
供应商设备封装: 48-QFN(8x8)
包装: 标准包装
其它名称: 768-1102-6
Copyright 2012 Future Technology Devices International Limited
45
Document No.: FT_000288
FT232H SINGLE CHANNEL HI-SPEED USB TO MULTIPURPOSE UART/FIFO IC
Datasheet Version 1.8
Clearance No.: FTDI #199
4.13 FT232H Mode Selection
The FT232H defaults to asynchronous serial interface (UART) mode of operation.
After a reset the required mode is determined by the contents of the external EEPROM which can be
programmed using FT_Prog.
The EEPROM contents determine if the FT232H device is configured as FT232 asynchronous serial
interface, FT245 FIFO interface, CPU-style FIFO interface, FT1248 or Fast Serial Interface.
Following a reset, the EEPROM is read and the FT232H configured for the selected mode. After device
enumeration, the FT_SetBitMode command (refer to D2XX_Programmers_Guide) can be sent to the
USB driver to switch the selected interface into other modes – asynchronous bit-bang, synchronous bit-
bang or MPSSE – if required.
When in FT245 FIFO mode, the FT_SetBitMode command can be used to select Synchronous FIFO
(FT_SetBitMode = 0x40). Note that FT245 FIFO mode must be configured in the EEPROM before
selecting the Synchronous FIFO mode.
The drive strength selection, slew rate and Schmitt input function can also be configured in the EEPROM.
The MPSSE can be configured directly using the D2XX commands. The D2XX_Programmers_Guide is
available from the FTDI website. The application note AN_108 – Command Processor for MPSSE and MCU
Host Bus Emulation Modes gives further explanation and examples for the MPSSE.
相关PDF资料
PDF描述
FT232RQ-REEL IC USB FS SERIAL UART 32-QFN
SC16C550BIA44,512 IC UART SINGLE W/FIFO 44-PLCC
SC16C550BIA44,518 IC UART SINGLE W/FIFO 44-PLCC
SC16IS750IPW,128 IC UART I2C/SPI 24-TSSOP
SC16IS740IPW/Q900, IC UART SINGLE W/FIFO 16-TSSOP
相关代理商/技术参数
参数描述
FT232HQ-TRAY 功能描述:USB 接口集成电路 USB HS to UART/FIFO SPI/JTAG/I2C QFN-48 RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20
FT232R 制造商:FTDI 制造商全称:FTDI 功能描述:USB UART IC - Single chip USB to asynchronous serial data transfer interface
FT232R_10 制造商:FTDI 制造商全称:FTDI 功能描述:USB UART IC - Single chip USB to asynchronous serial data transfer interface
FT232RL 制造商:Future Technology Devices International 功能描述:USB UART IC 28-Pin SSOP T/R 制造商:Future Technology Devices International (FTDI Chip) 功能描述:IC USB TO UART SMD SSOP28 232 制造商:Future Technology Devices International (FTDI Chip) 功能描述:IC, USB TO UART, SMD, 28SSOP 制造商:Future Technology Devices International (FTDI Chip) 功能描述:IC, USB UART INTERFACE, SSOP-28; USB Version:1.1, 2.0; Supply Voltage Min:1.8V; Supply Voltage Max:5.25V; Digital IC Case Style:SSOP; No. of Pins:28; Data Rate:3Mbps; Operating Temperature Min:-40C; Operating Temperature Max:85C ;RoHS Compliant: Yes
FT232RL R 制造商:Future Technology Devices International Ltd 功能描述:UART, 28 Pin, Plastic, SSOP