参数资料
型号: FT245RL-REEL
厂商: FTDI, Future Technology Devices International Ltd
文件页数: 21/37页
文件大小: 0K
描述: IC USB TO PARALLEL FIFO 28-SSOP
产品培训模块: USB Introduction
标准包装: 1
应用: USB 至 FIFO 控制器
接口: USB,FIFO,(同步/异步)
电源电压: 1.8 V ~ 5.25 V
封装/外壳: 28-SSOP(0.209",5.30mm 宽)
供应商设备封装: 28-SSOP
包装: 标准包装
安装类型: 表面贴装
产品目录页面: 634 (CN2011-ZH PDF)
配用: 768-1020-ND - MOD USB PARALLEL FIFO DEV FT245R
其它名称: 768-1011-6
Copyright 2010 Future Technology Devices International Limited
28
Document No.: FT_000052
FT245R USB FIFO IC Datasheet Version 2.12
Clearance No.: FTDI# 39
9 Internal EEPROM Configuration
Following a power-on reset or a USB reset the FT245R will scan its internal EEPROM and read the USB
configuration descriptors stored there. The default factory programmed values of the internal EEPROM
Parameter
Value
Notes
USB Vendor ID (VID)
0403h
FTDI default VID (hex)
USB Product UD (PID)
6001h
FTDI default PID (hex)
Serial Number Enabled?
Yes
Serial Number
See Note
A unique serial number is generated and
programmed into the EEPROM during device final
test.
Pull down I/O Pins in USB
Suspend
Disabled
Enabling this option will make the device pull down
on the FIFO interface lines when in USB suspend
mode (PWREN# is high).
Manufacturer Name
FTDI
Product Description
FT245R USB FIFO
Max Bus Power Current
90mA
Power Source
Bus Powered
Device Type
FT245R
USB Version
0200
Returns USB 2.0 device description to the host.
Note: The device is a USB 2.0 Full Speed device
(12Mb/s) as opposed to a USB 2.0 High Speed
device (480Mb/s).
Remote Wake Up
Enabled
Taking RXF# low will wake up the USB host
controller from suspend in approximately 20 ms.
High Current I/Os
Disabled
Enables the high drive level on the FIFO data bus
and control I/O pins.
Load VCP Driver
Enabled
Makes the device load the VCP driver interface for
the device.
Table 9.1 Default Internal EEPROM Configuration
The internal EEPROM in the FT245R can be programmed over USB using the FTDI utility program MPROG
and FT_PROG which can be downloaded from FTDI Utilities, on the FTDI website (www.ftdichip.com).
Version 2.8a or later is required for the FT245R chip. Users who do not have their own USB Vendor ID
but who would like to use a unique Product ID in their design can apply to FTDI for a free block of unique
PIDs. Contact FTDI support for this service.
相关PDF资料
PDF描述
FT4232HQ-REEL IC USB HS QUAD UART/SYNC 64-QFN
FUSB1500MHX IC USB 2.0 TRANSCEIVER 16-MLP
FUSB2805MLX TXRX USB2.0 HS OTG ULPI 32MLP
FXLA2203UMX TRANSLATOR LEVEL DUAL 24UMLP
GAL16V8D-15LJN SPLD 62.5MHZ EECMOS 20 PLCC
相关代理商/技术参数
参数描述
FT245RL-TUBE 制造商:Future Technology Devices International (FTDI Chip) 功能描述:USB FIFO IC 28-Pin SSOP Tube
FT245RQ 制造商:Future Technology Devices International 功能描述:Single Chip USB 32-Pin QFN 制造商:Future Technology Devices International (FTDI Chip) 功能描述:IC USB TO FIFO SMD QFN-32 245 制造商:Future Technology Devices International (FTDI Chip) 功能描述:IC, USB TO FIFO, SMD, QFN-32, 245 制造商:Future Technology Devices International (FTDI Chip) 功能描述:USB Full Speed to Parallel FIFO IC, Includes Oscillator and EEPROM - QFN-32 制造商:Future Technology Devices International (FTDI Chip) 功能描述:IC, USB FIFO INTERFACE, QFN-32; USB Type:USB FIFO; USB Version:2.0; Supply Voltage Min:1.8V; Supply Voltage Max:5.25V; Digital IC Case Style:QFN; No. of Pins:32; Data Rate:1Mbps; No. of Ports:2; Operating Temperature Min:-40C ;RoHS Compliant: Yes
FT245RQ-6000 制造商:FTDI 制造商全称:FTDI 功能描述:USB FIFO IC - Single chip USB to parallel FIFO bidirectional data transfer interface
FT245RQ-REEL 功能描述:USB 接口集成电路 USB to Parallel FIFO Enhanced IC QFN-32 RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20
FT245RQ-TRAY 制造商:Future Technology Devices International (FTDI Chip) 功能描述:Single Chip USB Tray