参数资料
型号: FT4232HQ-TRAY
厂商: FTDI, Future Technology Devices International Ltd
文件页数: 4/45页
文件大小: 0K
描述: IC USB HS QUAD UART/SYNC 64-QFN
标准包装: 260
系列: USBmadeEZ-FIFO
特点: USB 至 UART 和(或)SPI、I2C、JTAG
通道数: 4,QUART
FIFO's: 2048 字节
规程: RS232,RS422,RS485
电源电压: 3 V ~ 3.6 V
带自动流量控制功能:
带调制解调器控制功能:
带CMOS:
安装类型: 表面贴装
封装/外壳: 64-VFQFN 裸露焊盘
供应商设备封装: 64-QFN 裸露焊盘(9x9)
包装: 托盘
配用: 768-1031-ND - MOD USB HS FT4232H EVAL
其它名称: FT4232HQ - TRAY
Copyright 2010 Future Technology Devices International Limited
12
Document No.: FT_000060
FT4232H QUAD HIGH SPEED USB TO MULTIPURPOSE UART/MPSSE IC
Datasheet Version 2.2
Clearance No.: FTDI#78
3.4 Configured Pins
The following sections describe the function of the configurable pins referred to in Table 3.1 which is
determined by how the FT4232H is configured.
3.4.1 FT4232H pins used as an asynchronous serial interface
The FT4232H any of the 4 channels can be configured as an asynchronous serial UART interface
(RS232/422/485). When configured in this mode, the pins used and the descriptions of the signals are
shown in Table 3.5.
Channel
A
Pin No.
Channel
B
Pin No.
Channel
C
Pin No.
Channel
D
Pin No.
Name
Type
RS232 Configuration Description
16
26
38
48
TXD
OUTPUT
TXD = transmitter output
17
27
39
52
RXD
INPUT
RXD = receiver input
18
28
40
53
RTS#
OUTPUT
RTS# = Ready To send handshake
output
19
29
41
54
CTS#
INPUT
CTS# = Clear To Send handshake input
21
30
43
55
DTR#
OUTPUT
DTR# = Data Transmit Ready modem
signaling line
22
32
44
57
DSR#
INPUT
DSR# = Data Set Ready modem
signaling line
23
33
45
58
DCD#
INPUT
DCD# = Data Carrier Detect modem
signaling line
24
34
46
59
RI#/
TXDEN
INPUT/OUTPUT
RI# = Ring Indicator Control Input.
When the Remote Wake up option is
enabled in the EEPROM, taking RI# low
can be used to resume the PC USB Host
controller from suspend.
(see note 1, 2 and 3)
TXDEN = (TTL level). For use with RS485
level converters.
Table 3.5 Channel A,B,C and Channel D Asynchronous Serial Interface Configured Pin Descriptions
Notes
1.
When using remote wake-up, ensure the resistors are pulled-up in suspend. Also ensure
peripheral designs do not allow any current sink paths that may partially power the peripheral.
2.
If remote wake-up is enabled, a peripheral is allowed to draw up to 2.5mA in suspend. If remote
wake-up is disabled, the peripheral must draw no more than 500uA in suspend.
3. If a Pull-down is enabled, the 4232H will not wake up from suspend.
相关PDF资料
PDF描述
SC16C654BIEC,528 IC QUAD UART 64BYTE 64LFBGA
SC16C654BIBM,128 IC QUAD UART 64BYTE 64LQFP
SC16C554BIB64,157 IC UART QUAD SOT314-2
VI-B6B-IY CONVERTER MOD DC/DC 95V 50W
SCC2681AE1A44,518 IC DUART SOT187-2
相关代理商/技术参数
参数描述
FT-42-3T 制造商:PANASONIC INDUSTRIAL AUTOMATION SALES 功能描述:FIBER M4 THRUBEAM R4 BEND RADIUS 制造商:Panasonic Electric Works 功能描述:Fiber, M4, Thru-beam, 3M Free cut, R4 Bend radius
FT-42S 制造商:PANASONIC INDUSTRIAL AUTOMATION SALES 功能描述:FIBER M4 THREADED THRUBEAM R4 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 1.13M; Fiber Optic Sensor Type:Thrubeam; Sensing Range Max:1.13m; Sensing Range:0m to 1.13m
FT-42W 制造商:PANASONIC INDUSTRIAL AUTOMATION SALES 功能描述:FIBER M4 THREADED THRUBEAM R1 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 800MM; Fiber Optic Sensor Type:Thrubeam; Sensing Range Max:800mm; Sensing Range:0mm to 800mm
FT-43 制造商:PANASONIC ELECTRIC WORKS ACSD 功能描述:Sensor, M4 Threaded Thru Beam, R4, 2m Cable 制造商:Panasonic Electric Works 功能描述:SENSOR FIBRE OPTIC THRUBEAM 1.4M 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 1.4M 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 1.4M; Fiber Optic Sensor Type:Thrubeam; Sensing Range Max:1.4m; Sensing Range:0m to 1.4m
FT430 制造商:Black Box Corporation 功能描述:FASTENERS, CABLE (CABLE CLAMP)