参数资料
型号: FT4232HQ-TRAY
厂商: FTDI, Future Technology Devices International Ltd
文件页数: 6/45页
文件大小: 0K
描述: IC USB HS QUAD UART/SYNC 64-QFN
标准包装: 260
系列: USBmadeEZ-FIFO
特点: USB 至 UART 和(或)SPI、I2C、JTAG
通道数: 4,QUART
FIFO's: 2048 字节
规程: RS232,RS422,RS485
电源电压: 3 V ~ 3.6 V
带自动流量控制功能:
带调制解调器控制功能:
带CMOS:
安装类型: 表面贴装
封装/外壳: 64-VFQFN 裸露焊盘
供应商设备封装: 64-QFN 裸露焊盘(9x9)
包装: 托盘
配用: 768-1031-ND - MOD USB HS FT4232H EVAL
其它名称: FT4232HQ - TRAY
Copyright 2010 Future Technology Devices International Limited
14
Document No.: FT_000060
FT4232H QUAD HIGH SPEED USB TO MULTIPURPOSE UART/MPSSE IC
Datasheet Version 2.2
Clearance No.: FTDI#78
3.4.3 FT4232H pins used in an MPSSE
The FT4232H channel A and channel B each have a Multi-Protocol Synchronous Serial Engine (MPSSE).
Each MPSSE can be independently configured to a number of industry standard serial interface protocols
such as JTAG, I2C or SPI, or it can be used to implement a proprietary bus protocol. For example, it is
possible to use one of the FT4232H’s channels (e.g. channel A) to connect to an SRAM configurable FPGA
such as supplied by Altera or Xilinx. The FPGA device would normally be un-configured (i.e. have no
defined function) at power-up. Application software on the PC could use the MPSSE to download
configuration data to the FPGA over USB. This data would define the hardware function on power up. The
other MPSSE channel (e.g. channel B) would be available for another serial interface function while
channel C and channel D can be configured as UART or bit-bang mode. Alternatively each MPSSE can be
used to control a number of GPIO pins. When configured in this mode, the pins used and the descriptions
of the signals are shown in Table 3.7
Channel A
Pin No.
Channel B
Pin No.
Name
Type
MPSSE Configuration Description
16
26
TCK/SK
OUTPUT
Clock Signal Output. For example:
JTAG – TCK, Test interface clock
SPI – SK, Serial Clock
17
27
TDI/DO
OUTPUT
Serial Data Output. For example:
JTAG – TDI, Test Data Input
SPI – DO, serial data output
18
28
TDO/DI
INPUT
Serial Data Input. For example:
JTAG – TDO, Test Data output
SPI – DI, Serial Data Input
19
29
TMS/CS
OUTPUT
Output Signal Select. For example:
JTAG – TMS, Test Mode Select
SPI – CS, Serial Chip Select
21
30
GPIOL0
I/O
General Purpose input/output
22
32
GPIOL1
I/O
General Purpose input/output
23
33
GPIOL2
I/O
General Purpose input/output
24
34
GPIOL3
I/O
General Purpose input/output
Table 3.7 Channel A and Channel B MPSSE Configured Pin Descriptions
For a functional description of this mode, please refer to section 4.4.
When either Channel A or Channel B or both channels are used in MPSSE mode, Channel C and Channel
D can be configured as asynchronous serial interface (RS232/422/485) or Bit-Bang mode or a
combination of both.
相关PDF资料
PDF描述
SC16C654BIEC,528 IC QUAD UART 64BYTE 64LFBGA
SC16C654BIBM,128 IC QUAD UART 64BYTE 64LQFP
SC16C554BIB64,157 IC UART QUAD SOT314-2
VI-B6B-IY CONVERTER MOD DC/DC 95V 50W
SCC2681AE1A44,518 IC DUART SOT187-2
相关代理商/技术参数
参数描述
FT-42-3T 制造商:PANASONIC INDUSTRIAL AUTOMATION SALES 功能描述:FIBER M4 THRUBEAM R4 BEND RADIUS 制造商:Panasonic Electric Works 功能描述:Fiber, M4, Thru-beam, 3M Free cut, R4 Bend radius
FT-42S 制造商:PANASONIC INDUSTRIAL AUTOMATION SALES 功能描述:FIBER M4 THREADED THRUBEAM R4 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 1.13M; Fiber Optic Sensor Type:Thrubeam; Sensing Range Max:1.13m; Sensing Range:0m to 1.13m
FT-42W 制造商:PANASONIC INDUSTRIAL AUTOMATION SALES 功能描述:FIBER M4 THREADED THRUBEAM R1 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 800MM; Fiber Optic Sensor Type:Thrubeam; Sensing Range Max:800mm; Sensing Range:0mm to 800mm
FT-43 制造商:PANASONIC ELECTRIC WORKS ACSD 功能描述:Sensor, M4 Threaded Thru Beam, R4, 2m Cable 制造商:Panasonic Electric Works 功能描述:SENSOR FIBRE OPTIC THRUBEAM 1.4M 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 1.4M 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 1.4M; Fiber Optic Sensor Type:Thrubeam; Sensing Range Max:1.4m; Sensing Range:0m to 1.4m
FT430 制造商:Black Box Corporation 功能描述:FASTENERS, CABLE (CABLE CLAMP)