- 您现在的位置：买卖IC网 > PDF目录1219 > HSC-ADC-EVALB-DCZ (Analog Devices Inc)KIT EVAL ADC FIFO DUAL-CH USB HS PDF资料下载
参数资料
| 型号： | HSC-ADC-EVALB-DCZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 3/28页 |
| 文件大小： | 0K |
| 描述： | KIT EVAL ADC FIFO DUAL-CH USB HS |
| 设计资源： | Very Low Jitter Encode (Sampling) Clocks for High Speed Analog-to-Digital Converters Using ADF4002 (CN0003) |
| 标准包装： | 1 |
| 附件类型： | ADC 接口板 |
| 适用于相关产品： | 双路模数转换器型 |
| 产品目录页面： | 781 (CN2011-ZH PDF) |
第1页第2页当前第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
HSC-ADC-EVALB-SC/HSC-ADC-EVALB-DC
FIFO EVALUATION BOARD EASY START
REQUIREMENTS
6.
Once the cable is connected to both the computer and the
?
?
?
?
?
?
?
FIFO evaluation board, ADC Analyzer, and USB cable
High speed ADC evaluation board and ADC data sheet
Power supply for ADC evaluation board
Analog signal source and appropriate filtering
Low jitter clock source applicable for specific ADC
evaluation, typically <1 ps rms
PC running Windows 98 (2nd ed.), Windows 2000,
Windows Me, or Windows XP
PC with a USB 2.0 port recommended (USB 1.1-
compatible)
FIFO board, and power is supplied, the USB drivers start
to install. To complete the total installation of the FIFO
drivers, you need to complete the new hardware sequence
two times. The first Found New Hardware Wizard opens
with the text message This wizard helps you install
software for…Pre-FIFO 4.1 . Click the recommended
install, and go to the next screen. A hardware installation
warning window should then be displayed. Click Continue
Anyway . The next window that opens should finish the Pre-
FIFO 4.1 installation. Click Finish . Your computer should
go through a second Found New Hardware Wizard , and
the text message, This wizard helps you install software
EASY START STEPS
Note: You need administrative rights for the Windows
operating systems during the entire easy start procedure.
for…Analog Devices FIFO 4.1 , should be displayed.
Continue as you did in the previous installation and click
Continue Anyway . Then click Finish on the next two
windows. This completes the installation.
It is recommended to complete every step before reverting
to a normal user mode.
7.
(Optional) Verify in the device manager that Analog
Devices, FIFO4.1 is listed under the USB hardware.
1.
2.
Install ADC Analyzer from the CD provided in the FIFO
evaluation kit or download the latest version on the Web.
For the latest updates to the software, check the Analog
Devices website at www.analog.com/hsc-FIFO .
Connect the FIFO evaluation board to the ADC evaluation
board. If an adapter is required, insert the adapter between
the ADC evaluation board and the FIFO board. If using
8.
9.
Apply power to the evaluation board and check the voltage
levels at the board level.
Connect the appropriate analog input (which should be
filtered with a band-pass filter) and low jitter clock signal.
Make sure the evaluation boards are powered on before
connecting the analog input and clock.
the HSC-ADC-EVALB-SC model, connect the evaluation
board to the bottom two rows of the 120-pin connector,
closest to the installed IDT FIFO chip. If using an ADC
with a SPI interface, remove the two 4-pin corner keys so
that the third row can be connected.
10. Start ADC Analyzer.
11. Choose an existing configuration file for the ADC
evaluation board or create one.
12. Click Time Data in ADC Analyzer (left-most button under
3.
4.
5.
Connect the provided USB cable to the FIFO evaluation
board and to an available USB port on the computer.
Refer to Table 5 for any jumper changes. Most evaluation
boards can be used with the default settings.
After verification, connect the appropriate power supplies
to the ADC evaluation boards. The FIFO evaluation board
is supplied with a wall mount switching power supply that
provides a 6 V, 2 A maximum output. Connect the supply
end to the rated 100 ac to 240 ac wall outlet at 47 Hz to
63 Hz. The other end is a 2.1 mm inner diameter jack that
connects to the PCB at J301. Refer to the instructions
included in the ADC data sheet for more information
about the ADC evaluation board’s power supply and other
requirements.
Rev. 0 | Page 3 of 28
the menus). A reconstruction of the analog input is
displayed. If the expected signal does not appear, or if there
is only a flat red line, refer to the ADC Analyzer data sheet
at www.analog.com/hsc-FIFO for more information.
相关PDF资料 |
PDF描述 |
|---|---|
| HSC-ADC-EVALCZ | KIT EVAL ADC FIFO HI SPEED |
| HSHM-GUIDE-PIN-4 | CONN GUIDE PIN 8-32 UNC-2A |
| HSHM-GUIDE-SOCKET-1 | CONN HSHM GUIDE SOCKET 1 |
| HTC-10M | FUSEBLOCK 250V FOR 5X20 FUSE UL |
| HV275C | GAS TUBE GDT 3KA 2750V CORE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HSC-ADC-EVALB-SC | 制造商:Analog Devices 功能描述:FPGA BOARD FOR HSC ADCS - Bulk 制造商:Rochester Electronics LLC 功能描述: |
| HSC-ADC-EVALCZ | 功能描述:KIT EVAL ADC FIFO HI SPEED RoHS:是 类别:编程器，开发系统 >> 配件 系列:- 标准包装:1 系列:- 附件类型:适配器板 适用于相关产品:RCB230，RCB231，RCB212 配用:26790D-ND - RCB BREAKOUT BOARD RS232 CABLE |
| HSC-ADC-EVALCZ | 制造商:Analog Devices 功能描述:EVALUATION KIT ((NS)) |
| HSC-ADC-EVALDZ | 功能描述:数据转换 IC 开发工具 Data Converter Evaluation Platform RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
| HSC-ADC-EVAL-SC | 制造商:Analog Devices 功能描述:FIFO BOARD FOR HSC A-D CONVERTERS - Bulk 制造商:Analog Devices 功能描述:EVALUTION KITSINGLE CHANNEL ((NS)) |
发布紧急采购，3分钟左右您将得到回复。