- 您现在的位置：买卖IC网 > PDF目录378599 > IA88C00-PDW48I (Innovasic Semiconductor) Microcontroller PDF资料下载
参数资料
| 型号： | IA88C00-PDW48I |
| 厂商： | Innovasic Semiconductor |
| 英文描述： | Microcontroller |
| 中文描述： | 微控制器 |
| 文件页数： | 33/80页 |
| 文件大小： | 707K |
| 代理商： | IA88C00-PDW48I |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页当前第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页
IA88C00
Microcontroller
Data Sheet
As of Production Version -01
Copyright
2005 ENG 21 0 050519-00 www.Innovasic
Innovasic.com
Innovasic Semiconductor
Page 33 of 80 1.888.824.4184
D4 - WUEB - Wake-up Enable
- If this bit is set to 1, wake-up mode is enabled for both the transmitter
and the receiver. The transmitter adds a bit beyond those specified by the bits/character and the parity.
This added bit has the value specified in the Transmit Wake-up Value (TWUVAL) in the UMA register
(ControlRegR250B0). The reveiver expects a Wake-Up bit value in the incoming data stream after the
parity bit and compares this value with that specified in the Received Wake-Up value (RWVAL) bit in the
UMA register. The resulting action depends on the configuration of the Wake-up feature.
D5 - STPBTS - Stop Bits
- This bit determines the number of stop bits added to each character
transmitted from the UART transmit section. If this bit is a 0, one stop bit is added. If this bit is a 1, two
stop bits are added. The receiver always checks for at least one stop bit. A hardware reset forces this bit to
0.
D6 - SENBRK - Send Break
- When set to 1, this bit forces the transmit section to continuously output
0s, beginning with the following transmit clock, regardless of any data being transmitted at the time. This
bit functions whether or not the transmitter is enabled. When this bit is cleared to 0, the transmit section
continues to send the contents of the Transmit Data Register. A hardware reset forces this bit to 0.
D7 - TXDTSEL - Transmit Data Selec
t - This bit has an effect only if port pin P31 is configured as an
output. If this bit is set to 1, the serial data coming out of the transmit section is reflected on the P31 pin.
If this bit is set to 0, P31 acts as a normal port and P31 data is reflected on the P31 pin. A hardware reset
forces this bit to 0.
Figure 30. UART Receive Control (URC), R236 Bank 0
Bit
7
D7
0
R/W
6
D6
0
R/W
5
D5
0
R/W
4
D4
0
R/W
3
D3
0
R/W
2
D2
0
R/W
1
D1
0
R/W
0
D0
0
R
Initial Value
Read/Write
D0 - RCA - Receive Character Available
- This is a status bit that is set to a 1 when data is available in
the receive buffer (UIOR). When the CPU reads the receive buffer, it automatically clears this bit to 0. A
write to this possition has not effect. A hardware reset forces this bit to 0.
D1 - RENB - Receive Enable
- When this bit is set to 1, the receive operation begins. This bit should be
set only after all other receive parameters are established and the reciver is completely initialized. A
hardware reset clears this bit to 0.
D2 - PERR - Parity Error
- This is a status bit. When parity is enabled, this bit is set to 1 and buffered
with the character whose parity does not match the programmed parity (even/odd). This bit is latched so
that once an error occurs, it remains set until it is cleared to 0 by writing a 1 to this bit position.
D3 - OVERR - Overrun Error
- This status bit indicates that the receive buffer has not been read and
another character has been received. Only the character that has been written over is flagged with this
error. Once set, this bit remains set until cleared to 0 by writing a 1 to this bit position.
相关PDF资料 |
PDF描述 |
|---|---|
| IA88C00-PDW48I-R | Microcontroller |
| IA88C00-PLC68C | Microcontroller |
| IA88C00-PLC68C-R | Microcontroller |
| IA88C00-PLC68I | Microcontroller |
| IA88C00-PLC68I-R | Microcontroller |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IA88C00-PDW48I-R | 制造商:INNOVASIC 制造商全称:INNOVASIC 功能描述:Microcontroller |
| IA88C00-PLC68C | 制造商:INNOVASIC 制造商全称:INNOVASIC 功能描述:Microcontroller |
| IA88C00-PLC68C-R | 制造商:INNOVASIC 制造商全称:INNOVASIC 功能描述:Microcontroller |
| IA88C00-PLC68I | 制造商:INNOVASIC 制造商全称:INNOVASIC 功能描述:Microcontroller |
| IA88C00-PLC68I-R | 制造商:INNOVASIC 制造商全称:INNOVASIC 功能描述:Microcontroller |
发布紧急采购，3分钟左右您将得到回复。