参数资料
型号: IBM25PPC750FX-DB0513T
元件分类: 微控制器/微处理器
英文描述: 32-BIT, 700 MHz, RISC PROCESSOR, CBGA292
封装: 21 X 21 MM, 1 MM PITCH, CERAMIC, BGA-292
文件页数: 51/62页
文件大小: 452K
代理商: IBM25PPC750FX-DB0513T
DD 2.X
Preliminary
PowerPC 750FX RISC Microprocessor
Body_750FX_DS_DD2.X.fm.2.0
June 9, 2003
5. System Design Information
Page 53 of 63
5.8.3 Minimum Heat Sink Requirements
The worst-case power dissipation (PD) for the 750FX is shown in Table 3-5. A conservative thermal manage-
ment design will provide sufficient cooling to maintain the junction temperature (TJ) of the 750FX below 105C
at maximum PD and worst-case ambient temperature and airflow conditions.
Many factors affect the 750FX power dissipation, including VDD,TJ, core frequency, process factors, and the
code that is running on the processor. In general, PD increases with increases in TJ, VDD, Fcore, process
variables, and the number of instructions executed per second.
For various reasons, a designer may determine that the power dissipation of the 750FX in their application
will be less than the maximum value shown in the Datasheet. Assuming a lower PD will result in a thermal
management system with less cooling capacity than would be required for the maximum Datasheet PD. In
this case, the designer may decide to determine the actual maximum 750FX PD in the particular application.
Contact your IBM PowerPC FAE for more information.
In addition to the system factors that must be considered in a cooling system analysis, three things should be
noted. First, 750FX PD rises as TJ increases, so it is most useful to measure PD while the 750FX junction
temperature is at maximum. While not specified or guaranteed, this rise in PD with TJ is typically less than 1W
per 10C. So regardless of other factors, the minimum cooling solution must have a maximum temperature
rise of no more than 10C/W.
This minimum cooling solution is not generally achievable without a heat sink. A heat sink or heat spreader of
some sort must always be used in 750FX applications.
Second, due to process variations, there can be a significant variation in the PD of individual 750FX devices.
In addition, IBM will occasionally supply "downbinned" parts. These are faster parts that are shipped in lieu of
the speed that was ordered. For example, some parts that are marked as 600MHz may actually run as fast as
700MHz. These 700MHz parts will dissipate more power at 600MHz than the 600MHz parts. So power dissi-
pation analysis should be conducted using the fastest parts available.
Finally, regardless of methodology, IBM only supports system designs that successfully maintain the
maximum junction temperature within Datasheet limits. IBM also supports designs that rely on the maximum
PD values given in this Datasheet, and supply a cooling solution sufficient to dissipate that amount of power
while keeping the maximum junction temperature below the maximum TJ.
相关PDF资料
PDF描述
IBM25PPC750FX-FB0533T 32-BIT, 700 MHz, RISC PROCESSOR, CBGA292
IBM25PPC750FX-FB0112T 32-BIT, 600 MHz, RISC PROCESSOR, CBGA292
IBM25PPC750FX-GB0123T 32-BIT, 600 MHz, RISC PROCESSOR, CBGA292
IBM25PPC750FX-EB0122T 32-BIT, 600 MHz, RISC PROCESSOR, CBGA292
IBM25PPC750GLECR5HA3T 32-BIT, 1000 MHz, RISC PROCESSOR, CBGA292
相关代理商/技术参数
参数描述
IBM25PPC750FX-FB1013T 制造商:IBM 功能描述:32-BIT, 733 MHZ, RISC PROCESSOR, CBGA292
IBM25PPC750FX-FB2513T 制造商:IBM 功能描述:32-BIT, 800 MHz, RISC PROCESSOR, CBGA292
IBM25PPC750FX-GB0122V 制造商:IBM 功能描述:MPU 750XX RISC 32BIT - Trays
IBM25PPC750FX-GB0132T 制造商:IC'S/TRANSISTORS/DIO 功能描述: 制造商:IC'S/TRANSISTORS/DIODES 功能描述:
IBM25PPC750FX-GB0132V 制造商:IBM 功能描述:MPU 750XX RISC 32BIT - Trays