- 您现在的位置：买卖IC网 > PDF目录136444 > ICS9148YF-111 100 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO48 PDF资料下载
参数资料
| 型号： | ICS9148YF-111 |
| 元件分类： | 时钟产生/分配 |
| 英文描述： | 100 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO48 |
| 封装： | 0.300 INCH, SSOP-48 |
| 文件页数： | 16/18页 |
| 文件大小： | 545K |
| 代理商： | ICS9148YF-111 |
7
ICS9148-111
Third party brands and names are the property of their respective owners.
Pins 2, 7, 8, 25 & 26 on the ICS9148-111 serve as dual signal
functions to the device. During initial power-up, they act as
input pins. The logic level (voltage) that is present on these
pins at this time is read and stored into a 4-bit internal data
latch. At the end of Power-On reset, (see AC characteristics
for timing values), the device changes the mode of operations
for these pins to an output function. In this mode the pins
produce the specified buffered clocks to external loads.
To program (load) the internal configuration register for these
pins, a resistor is connected to either the VDD (logic 1)
power supply or the GND (logic 0) voltage potential. A 10
Kilohm(10K) resistor is used to provide both the solid CMOS
programming voltage needed during the power-up
programming period and to provide an insignificant load on
the output clock during the subsequent operating period.
Figs. 1 and 2 show the recommended means of implementing
this function. In Fig. 1 either one of the resistors is loaded
onto the board (selective stuffing) to configure the devices
internal logic. Figs. 2a and b provide a single resistor loading
option where either solder spot tabs or a physical jumper
header may be used.
Shared Pin Operation -
Input/Output Pins
Fig. 1
These figures illustrate the optimal PCB physical layout
options. These configuration resistors are of such a large
ohmic value that they do not effect the low impedance clock
signals. The layouts have been optimized to provide as little
impedance transition to the clock signal as possible, as it
passes through the programming resistor pad(s).
相关PDF资料 |
PDF描述 |
|---|---|
| IS80C52-24PL | 8-BIT, MROM, 24 MHz, MICROCONTROLLER, PQCC44 |
| IBM25NPE405H-3DA266C | 32-BIT, 266 MHz, RISC PROCESSOR, PBGA580 |
| ICS2494AN-XXX | 135 MHz, VIDEO CLOCK GENERATOR, PDIP20 |
| ICS9250YF-23 | 166.67 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO56 |
| ICS9250YF-PPP-T | 149.69 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO56 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ICS9148YF-12 | 制造商:ICS 制造商全称:ICS 功能描述:Pentium/ProTM System Clock Chip |
| ICS9148YF-17-T | 制造商:ICS 制造商全称:ICS 功能描述:Frequency Generator & Integrated Buffers for PENTIUM/ProTM |
| ICS9148YF-36 | 制造商:ICS 制造商全称:ICS 功能描述:Frequency Generator & Integrated Buffers for PENTIUM/ProTM |
| ICS9148YF-46 | 制造商:ICS 制造商全称:ICS 功能描述:Pentium/ProTM System Clock Chip |
| ICS9148YF-60 | 制造商:ICS 制造商全称:ICS 功能描述:Pentium/ProTM System Clock Chip |
发布紧急采购，3分钟左右您将得到回复。