- 您现在的位置：买卖IC网 > Datasheet目录328 > IDT7037L20PFI (IDT, Integrated Device Technology Inc)IC SRAM 576KBIT 20NS 100TQFP Datasheet资料下载
参数资料
| 型号： | IDT7037L20PFI |
| 厂商： | IDT, Integrated Device Technology Inc |
| 文件页数： | 14/17页 |
| 文件大小： | 0K |
| 描述： | IC SRAM 576KBIT 20NS 100TQFP |
| 标准包装： | 6 |
| 格式 - 存储器： | RAM |
| 存储器类型： | SRAM - 双端口，异步 |
| 存储容量： | 576K（32K x 18） |
| 速度： | 20ns |
| 接口： | 并联 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 100-LQFP |
| 供应商设备封装： | 100-TQFP（14x14） |
| 包装： | 托盘 |
| 其它名称： | 7037L20PFI |
IDT7037L
High-Speed 32K x 18 Dual-Port Static RAM
Truth Table V —Address BUSY
Arbitration (4)
Industrial and Commercial Temperature Ranges
Inputs
Outputs
CE L
X
H
X
L
CE R
X
X
H
L
A OL -A 14L
A OR -A 14R
NO MATCH
MATCH
MATCH
MATCH
BUSY L (1)
H
H
H
(2)
BUSY R (1)
H
H
H
(2)
Function
Normal
Normal
Normal
Write
Inhibit (3)
NOTES:
4838 tbl 17
1. Pins BUSY L and BUSY R are both outputs when the part is configured as a master. Both are inputs when configured as a slave. BUSY outputs on the IDT7037 are
push-pull, not open drain outputs. On slaves the BUSY input internally inhibits writes.
2. "L" if the inputs to the opposite port were stable prior to the address and enable inputs of this port. "H" if the inputs to the opposite port became stable after the address
and enable inputs of this port. If t APS is not met, either BUSY L or BUSY R = LOW will result. BUSY L and BUSY R outputs can not be LOW simultaneously.
3. Writes to the left port are internally ignored when BUSY L outputs are driving LOW regardless of actual logic level on the pin. Writes to the right port are internally ignored
when BUSY R outputs are driving LOW regardless of actual logic level on the pin.
4. Refer to Chip Enable Truth Table.
Truth Table VI — Example of Semaphore Procurement Sequence (1,2,3)
Functions
No Action
Left Port Writes "0" to Semaphore
Right Port Writes "0" to Semaphore
Left Port Writes "1" to Semaphore
Left Port Writes "0" to Semaphore
Right Port Writes "1" to Semaphore
Left Port Writes "1" to Semaphore
Right Port Writes "0" to Semaphore
Right Port Writes "1" to Semaphore
Left Port Writes "0" to Semaphore
Left Port Writes "1" to Semaphore
NOTES:
D 0 - D 17 Left
1
0
0
1
1
0
1
1
1
0
1
D 0 - D 17 Right
1
1
1
0
0
1
1
0
1
1
1
Status
Semaphore free
Left port has semaphore token
No change. Right side has no write access to semaphore
Right port obtains semaphore token
No change. Left port has no write access to semaphore
Left port obtains semaphore token
Semaphore free
Right port has semaphore token
Semaphore free
Left port has semaphore token
Semaphore free
4838 tbl 18
1. This table denotes a sequence of events for only one of the eight semaphores on the IDT7037.
2. There are eight semaphore flags written to via I/O 0 and read from all I/O's (I/O 0 -I/O 17 ). These eight semaphores are addressed by A 0 -A 2 .
3. CE = V IH , SEM = V IL to access the semaphores. Refer to the Semaphore Read/Write Control Truth Table.
Functional Description
The IDT7037 provides two ports with separate control, address and
I/O pins that permit independent access for reads or writes to any location
in memory. The IDT7037 has an automatic power down feature controlled
by CE . The CE 0 and CE 1 control the on-chip power down circuitry that
permits the respective port to go into a standby mode when not selected
( CE = HIGH). When a port is enabled, access to the entire memory array
is permitted.
Interrupts
If the user chooses the interrupt function, a memory location (mail box
or message center) is assigned to each port. The left port interrupt flag
( INT L ) is asserted when the right port writes to memory location 7FFE
(HEX), where a write is defined as CE R = R/ W R = V IL per Truth Table
IV. The left port clears the interrupt through access of address location
7FFE when CE L = OE L = V IL , R/ W is a "don't care". Likewise, the right
port interrupt flag ( INT R ) is asserted when the left port writes to memory
location 7FFF (HEX) and to clear the interrupt flag ( INT R ), the right port
must read the memory location 7FFF. The message (18 bits) at 7FFE or
7FFF is user-defined since it is an addressable SRAM location. If the
interrupt function is not used, address locations 7FFE and 7FFF are not
used as mail boxes, but as part of the random access memory. Refer to
Table IV for the interrupt operation.
14
相关PDF资料 |
PDF描述 |
|---|---|
| IDT7038L15PFG | IC SRAM 1024KBIT 15NS 120TQFP |
| IDT7052L20G | IC SRAM 16KBIT 20NS 108PGA |
| IDT7054L20G | IC SRAM 32KBIT 20NS 108PGA |
| IDT709089L9PF | IC SRAM 512KBIT 9NS 100TQFP |
| IDT709099L9PFI | IC SRAM 1MBIT 9NS 100TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IDT7037L20PFI8 | 功能描述:IC SRAM 576KBIT 20NS 100TQFP RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:1,000 系列:- 格式 - 存储器:RAM 存储器类型:SRAM - 双端口，同步 存储容量:1.125M（32K x 36） 速度:5ns 接口:并联 电源电压:3.15 V ~ 3.45 V 工作温度:-40°C ~ 85°C 封装/外壳:256-LBGA 供应商设备封装:256-CABGA（17x17） 包装:带卷 (TR) 其它名称:70V3579S5BCI8 |
| IDT7038L15PF | 功能描述:IC SRAM 1.125MBIT 15NS 100TQFP RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:3,000 系列:- 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:8K (1K x 8) 速度:400kHz 接口:I²C，2 线串口 电源电压:1.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:带卷 (TR) |
| IDT7038L15PF8 | 功能描述:IC SRAM 1.125MBIT 15NS 100TQFP RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:1,000 系列:- 格式 - 存储器:RAM 存储器类型:SRAM - 双端口，同步 存储容量:1.125M（32K x 36） 速度:5ns 接口:并联 电源电压:3.15 V ~ 3.45 V 工作温度:-40°C ~ 85°C 封装/外壳:256-LBGA 供应商设备封装:256-CABGA（17x17） 包装:带卷 (TR) 其它名称:70V3579S5BCI8 |
| IDT7038L15PFG | 功能描述:IC SRAM 1024KBIT 15NS 120TQFP RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:3,000 系列:- 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:8K (1K x 8) 速度:400kHz 接口:I²C，2 线串口 电源电压:1.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:带卷 (TR) |
| IDT7038L15PFG8 | 制造商:Integrated Device Technology Inc 功能描述:IC SRAM 1.125MBIT 15NS 100TQFP |
发布紧急采购，3分钟左右您将得到回复。