- 您现在的位置：买卖IC网 > PDF目录2076 > IDT723643L12PF (IDT, Integrated Device Technology Inc)IC FIFO SYNC 1024X36 128QFP PDF资料下载
参数资料
| 型号： | IDT723643L12PF |
| 厂商： | IDT, Integrated Device Technology Inc |
| 文件页数： | 2/28页 |
| 文件大小： | 0K |
| 描述： | IC FIFO SYNC 1024X36 128QFP |
| 标准包装： | 72 |
| 系列： | 7200 |
| 功能： | 同步 |
| 存储容量： | 36.8K（1K x 36） |
| 数据速率： | 83MHz |
| 访问时间： | 12ns |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 128-LQFP |
| 供应商设备封装： | 128-TQFP（14x20） |
| 包装： | 托盘 |
| 其它名称： | 723643L12PF |
第1页当前第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
10
COMMERCIALTEMPERATURERANGE
IDT723623/723633/723643 BUS-MATCHING SyncFIFO
256 x 36, 512 x 36, 1,024 x 36
A HIGH on the BE/
FWFT input when the Reset (RS1) input goes from
LOW to HIGH will select a Big-Endian arrangement. In this case, the most
significant byte (word) of the long word written to Port A will be read from Port
B first; the least significant byte (word) of the long word written to Port A will be
read from Port B last.
ALOWontheBE/
FWFTinputwhentheReset(RS1)inputgoesfromLOW
toHIGHwillselectaLittle-Endianarrangement. Inthiscase,theleastsignificant
byte (word) of the long word written to Port A will be read from Port B first; the
most significant byte (word) of the long word written to Port A will be read from
Port B last. Refer to Figure 2 for an illustration of the BE function. See Figure
3 (Reset) for an Endian select timing diagram.
— TIMING MODE SELECTION
AfterReset, theFWFTselectfunctionisactive,permittingachoicebetween
two possible timing modes: IDT Standard mode or First Word Fall Through
(FWFT) mode. Once the Reset (
RS1)inputisHIGH,aHIGHontheBE/FWFT
inputduringthenextLOW-to-HIGHtransitionofCLKAandCLKBwillselectIDT
Standard mode. This mode uses the Empty Flag function (
EF) to indicate
whether or not there are any words present in the FIFO memory. It uses the
FullFlagfunction(
FF)toindicatewhetherornottheFIFOmemoryhasanyfree
space for writing. In IDT Standard mode, every word read from the FIFO,
including the first, must be requested using a formal read operation.
OncetheReset(
RS1)inputisHIGH,aLOWontheBE/FWFTinputduring
the next LOW-to-HIGH transition of CLKA and CLKB will select FWFT mode.
ThismodeusestheOutputReadyfunction(OR)toindicatewhetherornotthere
is valid data at the data outputs (B0-B35). It also uses the Input Ready function
(IR) to indicate whether or not the FIFO memory has any free space for writing.
In the FWFT mode, the first word written to an empty FIFO goes directly to data
outputs, no read request necessary. Subsequent words must be accessed by
performing a formal read operation.
Following Reset, the level applied to the BE/
FWFT input to choose the
desired timing mode must remain static throughout FIFO operation. Refer to
Figure 3 (Reset) for a First Word Fall Through select timing diagram.
PROGRAMMING THE ALMOST-EMPTY AND ALMOST-FULL FLAGS
Two registers in the IDT723623/723633/723643 are used to hold the
offsetvaluesfortheAlmost-EmptyandAlmost-Fullflags. TheAlmost-Emptyflag
(
AE)OffsetregisterislabeledXandAlmost-Fullflag(AF)Offsetregisterislabeled
Y. The offset registers can be loaded with preset values during the reset of the
FIFO, programmed in parallel using the FIFO’s Port A data inputs, or
programmedinserialusingtheSerialData(SD)input(seeTable1).
SPM,FS0/
SD and FS1/
SEN function the same way in both IDT Standard and FWFT
modes.
— PRESET VALUES
To load a FIFO’s Almost-Empty flag and Almost-Full flag Offset registers
with one of the three preset values listed in Table 1, the Serial Program Mode
(
SPM)andatleastoneoftheflag-selectinputsmustbeHIGHduringtheLOW-
to-HIGH transition of the Reset input (
RS1). For example, to load the preset
value of 64 into X and Y,
SPM,FS0andFS1mustbeHIGHwhenRS1returns
HIGH. For the relevant preset value loading timing diagram, see Figure 3.
SIGNAL DESCRIPTION
RESET (
RS1/RS2)
Afterpowerup,aResetoperationmustbeperformedbyprovidingaLOW
pulse to
RS1 and RS2 simultaneously. Afterwards, the FIFO memory of the
IDT723623/723633/723643 undergoes a complete reset by taking its Reset
(
RS1 and RS2) input LOW for at least four Port A clock (CLKA) and four Port
B clock (CLKB) LOW-to-HIGH transitions. The Reset inputs can switch
asynchronously to the clocks. A Reset initializes the internal read and write
pointers and forces the Full/Input Ready flag (
FF/IR)LOW,theEmpty/Output
Ready flag (
EF/OR)LOW,theAlmost-Emptyflag(AE)LOW,andtheAlmost-
Full flag (
AF)HIGH. AReset(RS1)alsoforcestheMailboxflag(MBF1)ofthe
parallelmailboxregisterHIGH,andatthesametimethe
RS2andMBF2operate
likewise. After a Reset, the FIFO’s Full/Input Ready flag is set HIGH after two
write clock cycles to begin normal operation.
ALOW-to-HIGHtransitionontheFlFOReset(
RS1)inputlatchesthevalue
of the Big-Endian (BE) input for determining the order by which bytes are
transferred through Port B.
ALOW-to-HIGHtransitionontheFlFOReset(
RS1)inputalsolatchesthe
values of the Flag Select (FS0, FS1) and Serial Programming Mode (
SPM)
inputs for choosing the Almost-Full and Almost-Empty offset programming
method (for details see Table 1, Flag Programming, and Almost-Empty and
Almost-Fullflagoffsetprogramming section).TherelevantReset timingdiagram
can be found in Figure 3.
PARTIAL RESET (
PRS)
The FIFO memory of the IDT723623/723633/723643 undergoes a
limited reset by taking its associated Partial Reset (
PRS)inputLOWforatleast
fourPortAclock(CLKA)andfourPortBclock(CLKB)LOW-to-HIGHtransitions.
ThePartialResetinput canswitchasynchronouslytotheclocks. APartialReset
initializes the internal read and write pointers and forces the Full/Input Ready
flag (
FF/IR) LOW, the Empty/Output Ready flag (EF/OR) LOW, the Almost-
Emptyflag(
AE)LOW,andtheAlmost-Fullflag(AF)HIGH. APartialResetalso
forces the Mailbox flag (
MBF1, MBF2) of the parallel mailbox register HIGH.
AfteraPartialReset,theFIFO’sFull/InputReadyflagissetHIGHaftertwoclock
cycles to begin normal operation. See Figure 4, Partial Reset (IDTStandard
and FWFT Modes) for the relevant timing diagram.
Whateverflagoffsets,programmingmethod(parallelorserial),andtiming
mode(FWFTorIDTStandardmode)arecurrentlyselectedat thetimeaPartial
Reset is initiated, those settings will be remain unchanged upon completion of
the reset operation. A Partial Reset may be useful in the case where
reprogramming a FIFO following a Reset would be inconvenient.
BIG-ENDIAN/FIRST WORD FALL THROUGH (BE/
FWFT)
— ENDIAN SELECTION
This is a dual purpose pin. At the time of Reset, the BE select function is
active,permittingachoiceofBig-orLittle-Endianbytearrangementfordataread
from Port B. This selection determines the order by which bytes (or words) of
dataaretransferredthroughthisport. Forthefollowingillustrations,assumethat
a byte (or word) bus size has been selected for Port B. (Note that when Port
B is configured for a long word size, the Big-Endian function has no application
and the BE input is a “don’t care”1.)
NOTE:
1. Either a HIGH or LOW can be applied to a “don’t care” input with no change to the logical operation of the FIFO. Nevertheless, inputs that are temporarily “don’t care” (along with unused
inputs) must not be left open, rather they must be either HIGH or LOW.
相关PDF资料 |
PDF描述 |
|---|---|
| IDT723644L12PF | IC FIFO SYNC 2048X36 128QFP |
| IDT723646L12PF | IC FIFO SYNC 2048X36 128QFP |
| IDT723651L20PQFI | IC FIFO SYNC 2048X36 132QFP |
| IDT723653L15PF8 | IC FIFO SYNC 2048X36 128-TQFP |
| IDT723672L12PQF | IC FIFO SYNC 16384X36 132QFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IDT723643L12PF8 | 功能描述:IC FIFO SYNC 1024X36 128QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:7200 标准包装:90 系列:7200 功能:同步 存储容量:288K（16K x 18） 数据速率:100MHz 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP（14x14） 包装:托盘 其它名称:72271LA10PF |
| IDT723643L12PFG | 制造商:Integrated Device Technology Inc 功能描述:FIFO Mem Sync Dual Depth/Width Bi-Dir 1K x 36 128-Pin TQFP |
| IDT723643L15PF | 功能描述:IC FIFO SYNC 1024X36 128QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:7200 标准包装:90 系列:7200 功能:同步 存储容量:288K（16K x 18） 数据速率:100MHz 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP（14x14） 包装:托盘 其它名称:72271LA10PF |
| IDT723643L15PF8 | 功能描述:IC FIFO SYNC 1024X36 128QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:7200 标准包装:90 系列:7200 功能:同步 存储容量:288K（16K x 18） 数据速率:100MHz 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP（14x14） 包装:托盘 其它名称:72271LA10PF |
| IDT723644L12PF | 功能描述:IC FIFO SYNC 2048X36 128QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:7200 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
发布紧急采购，3分钟左右您将得到回复。