- 您现在的位置：买卖IC网 > PDF目录9951 > IDT723651L20PQF (IDT, Integrated Device Technology Inc)IC FIFO SYNC 2048X36 132QFP PDF资料下载
参数资料
| 型号： | IDT723651L20PQF |
| 厂商： | IDT, Integrated Device Technology Inc |
| 文件页数： | 2/21页 |
| 文件大小： | 0K |
| 描述： | IC FIFO SYNC 2048X36 132QFP |
| 标准包装： | 36 |
| 系列： | 7200 |
| 功能： | 同步 |
| 存储容量： | 72K（2K x 36） |
| 数据速率： | 50MHz |
| 访问时间： | 20ns |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 132-BQFP 缓冲式 |
| 供应商设备封装： | 132-PQFP（24.13x24.13） |
| 包装： | 托盘 |
| 其它名称： | 723651L20PQF |
10
COMMERCIALANDINDUSTRIAL
TEMPERATURERANGES
IDT723631/723641/723651 CMOS SyncFIFO
512 x 36, 1,024 x 36 and 2,048 x 36
when CLKA and CLKB operate asynchronously to one another. OR and
AE are synchronized to CLKB. IR and AF are synchronized to CLKA.
Table 4 shows the relationship of each flag to the number of words stored
in memory.
OUTPUT READY FLAG (OR)
The Output Ready flag of a FIFO is synchronized to the port Clock that
reads data from its array (CLKB). When the OR flag is HIGH, new data is
present in the FIFO output register. When the OR flag is LOW, the previ-
ous data word is present in the FIFO output register and attempted FIFO
reads are ignored.
A FIFO read pointer is incremented each time a new word is clocked to
its output register. The state machine that controls an OR flag monitors a
write-pointer and read-pointer comparator that indicates when the FIFO
SRAM status is empty, empty+1, or empty+2. From the time a word is
written to a FIFO, it can be shifted to the FIFO output register in a minimum
of three cycles of CLKB. Therefore, an OR flag is LOW if a word in
memory is the next data to be sent to the FIFO output register and three
CLKB cycles have not elapsed since the time the word was written. The
OR flag of the FIFO remains LOW until the third LOW-to-HIGH transition of
CLKB occurs, simultaneously forcing the OR flag HIGH and shifting the
word to the FIFO output register.
A LOW-to-HIGH transition on CLKB begins the first synchronization cycle
of a write if the clock transition occurs at time tSKEW1 or greater after the
write. Otherwise, the subsequent CLKB cycle may be the first synchroniza-
tion cycle (see Figure 7).
INPUT READY FLAG (IR)
The Input Ready flag of a FIFO is synchronized to the port Clock that
writes data to its array (CLKA). When the IR flag is HIGH, a memory
location is free in the SRAM to write new data. No memory locations are
free when the IR flag is LOW and attempted writes to the FIFO are ignored.
Each time a word is written to a FIFO, its write pointer is incremented.
The state machine that controls an IR flag monitors a write-pointer and
read pointer comparator that indicates when the FIFO SRAM status is full,
full-1, or full-2. From the time a word is read from a FIFO, its previous
memory location is ready to be written in a minimum of three cycles of
CLKA. Therefore, an IR flag is LOW if less than two cycles of CLKA have
elapsed since the next memory write location has been read. The second
LOW-to-HIGH transition on CLKA after the read sets the Input Ready flag
HIGH, and data can be written in the following cycle.
A LOW-to-HIGH transition on CLKA begins the first synchronization cycle
of a read if the clock transition occurs at time tSKEW1 or greater after the
read. Otherwise, the subsequent CLKA cycle may be the first synchroniza-
tion cycle (see Figure 8).
ALMOST-EMPTY FLAG (
AE)
The Almost-Empty flag of a FIFO is synchronized to the port Clock that
reads data from its array (CLKB). The state machine that controls an
AE
flag monitors a write-pointer and read-pointer comparator that indicates
when the FIFO SRAM status is almost-empty, almost-empty+1, or almost-
empty+2. The almost-empty state is defined by the contents of register X.
This register is loaded with a preset value during a FIFO reset, pro-
TABLE 3 — PORT-B ENABLE FUNCTION TABLE
CSB
W/RB
ENB
MBB
CLKB
B0-A35 Outputs
Port Functions
H
XXXX
In High-Impedance State
None
L
X
In High-Impedance State
None
LL
H
L
↑
In High-Impedance State
None
LL
H
↑
In High-Impedance State
Mail2 Write
L
H
L
X
Active, FIFO Output Register
None
LH
H
L
↑
Active, FIFO Output Register
FIFO read
L
H
L
H
X
Active, Mail1 Register
None
L
HHH
↑
Active, Mail1 Register
Mail1 Read (Set MBF1 HIGH)
TABLE 2 — PORT-A ENABLE FUNCTION TABLE
CSA
W/
RA
ENA
MBA
CLKA
A0-A35 Outputs
Port Functions
H
XXXX
In High-Impedance State
None
L
H
L
X
In High-Impedance State
None
LH
H
L
↑
In High-Impedance State
FIFO Write
L
HHH
↑
In High-Impedance State
Mail1 Write
LLLL
X
Active, Mail2 Register
None
LL
H
L
↑
Active, Mail2 Register
None
L
H
X
Active, Mail2 Register
None
LL
H
↑
Active, Mail2 Register
Mail2 Read (Set MBF2 HIGH)
相关PDF资料 |
PDF描述 |
|---|---|
| IDT723663L15PF | IC FIFO SYNC 4096X36 128QFP |
| MS27484T18B35SA | CONN PLUG 66POS STRAIGHT W/SCKT |
| IDT72605L20PF | IC FIFO BI SYNC 256X18 64-TQFP |
| MS3100F20-11P | CONN RCPT 13POS WALL MNT W/PINS |
| MS27468T15A97S | CONN RCPT 12POS JAM NUT W/SCKT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IDT723651L20PQFI | 功能描述:IC FIFO SYNC 2048X36 132QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:7200 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
| IDT723652L12PF | 功能描述:IC FIFO BI SYNC 4096X36 120QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:7200 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
| IDT723652L12PF8 | 功能描述:IC FIFO BI SYNC 4096X36 120QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:7200 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
| IDT723652L12PQF | 功能描述:IC FIFO BI SYNC 4096X36 132QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:7200 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
| IDT723652L15PF | 功能描述:IC FIFO BI SYNC 4096X36 120QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:7200 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
发布紧急采购，3分钟左右您将得到回复。