参数资料
型号: IS-C1603
厂商: NKK Switches
文件页数: 14/52页
文件大小: 0K
描述: CONTROL FOR 36X24 LCD PB/DISPLAY
产品培训模块: Smart Switch Overview
视频文件: OLED Pushbutton in Action
RoHS指令信息: AT, IS Series, Cert of Compliance
标准包装: 1
附件类型: 控制器
适用于相关产品: SmartSwitch? 开关
产品目录页面: 2526 (CN2011-ZH PDF)
配用: IS01BCEF-ND - SMARTDISPLAY SUPER YEL/GRN LED
IS01BCE-ND - SMARTDISPLAY SUPER YELLOW LED
IS15SBFP4B-ND - SMARTSWITCH COMPACT WHITE LED
IS15SBCP4EF-ND - SMARTSWITCH COMPACT YEL/GRN LED
IS15SACP4CF-ND - SMARTSWITCH COMPACT RED/GRN LED
IS15ABFP4B-ND - SMARTSWITCH STD BLK W/WHITE LED
IS15ABDP4B-ND - SMARTSWITCH STD BLU W/WHITE LED
IS15ABDP4EG-ND - SMARTSWITCH STD YELLOW/BLUE LED
IS15ABDP4E-ND - SMARTSWITCH STD BLUE W/YEL LED
IS15ABCP4EF-ND - SMARTSWITCH STD YEL/GRN LED
更多...
其它名称: 360-2427
IS-C1603 Intelligent Controller User
Manual
7850 East Gelding Drive ? Scottsdale, AZ 85260-3420
Command to set LCD/LED codes for all 16 Switches
This command downloads the 16 LCD/LED codes to the refresh buffer. If the value of a LCD/LED code is
zero, the corresponding code in the refresh buffer is left unchanged. If an update is desired for the value of
zero, Bit 7 should be set to 1. The new backlight colors go to effect immediately.
If it is desired to control the backlights from host completely, the bit 0 of FLAG-B should be disabled.
Otherwise the backlights change the LCD/LED codes from storage when any new address is assigned to the
switches.
command format: 2CH
30H
[LCD/LED code block]
transmit format: (xxH) (xxH) (xxAH)
[LCD/LED code block] is 16 bytes of LCD/LED codes, one for each switch, and must be sent in ASCII HEX
format.
The controller responds with 61H and after processing the command 79H.
Command to download one LCD/LED Code to specified Switch
This command downloads a LCD/LED code to the refresh buffer for the specified switch. The new backlight
color goes to effect immediately.
If it is desired to control the backlights from host completely, the bit 0 of FLAG-B should be disabled.
Otherwise the backlights change the LCD/LED codes from storage when any new address is assigned to the
switches.
command format:
2FH
30H
[Switch #] [LCD/LED code]
transmit format: (xxH) (xxH) (xxAH) (xxAH)
[Switch #] is one byte with value of 01H to 10H and must be sent in ASCII HEX format.
[LCD/LED code] is one byte and must be sent in ASCII HEX format.
The controller responds with 61H and after processing the command 79H.
6.3 Graphic images, graphic manipulation and LCD/LED codes.
These commands affect the data in the storage memory. They can be used in real-time applications.
Any change to storage images will be displayed immediately if the address is assigned to a switch. However
any change to LCD/LED code in storage does not go to effect as the LCD/LED code does not transferred
from storage to refresh LCD/LED buffer by these commands.
IS-C1603 Intelligent Controller User Manual D.doc
Toll Free 1.877.2BUYNKK (877.228.9655) ? Phone 480.991.0942 ? Fax 480.998.1435
www.nkkswitches.com ? Email engineering@nkkswitches.com
Page 14 of 52
0110
相关PDF资料
PDF描述
IS-L0205-C LOGIC BOARD FOR 36X24 LCD
IS-L02H2-C BOARD LOGIC 2 HI RES SW SOCKETS
IS-L02L1-C BOARD LOGIC 2 OLED SW SOCKETS
IS15AACP4CF SMARTSWITCH STD YEL RED/GRN LED
IS15ABCP4EF SMARTSWITCH STD YEL/GRN LED
相关代理商/技术参数
参数描述
IS-C1603-CONTROLLER 功能描述:CTLR FOR 16 STD SMART SWITCHES RoHS:是 类别:开关 >> 配件 系列:- 标准包装:100 系列:- 其它名称:886.0007886.0007-ND
IS-C1603H 功能描述:交换机开发工具 RoHS:否 制造商:NKK Switches 工具用于评估:Smart Switch - Compact RGB 工作电压: 最大工作温度:
ISC1812 制造商:VISHAY 制造商全称:Vishay Siliconix 功能描述:Surface Mount, Molded, Shielded Inductors
ISC-1812 制造商:VISHAY 制造商全称:Vishay Siliconix 功能描述:Surface Mount, Molded, Shielded Inductors