参数资料
型号: IS-C1603
厂商: NKK Switches
文件页数: 31/52页
文件大小: 0K
描述: CONTROL FOR 36X24 LCD PB/DISPLAY
产品培训模块: Smart Switch Overview
视频文件: OLED Pushbutton in Action
RoHS指令信息: AT, IS Series, Cert of Compliance
标准包装: 1
附件类型: 控制器
适用于相关产品: SmartSwitch? 开关
产品目录页面: 2526 (CN2011-ZH PDF)
配用: IS01BCEF-ND - SMARTDISPLAY SUPER YEL/GRN LED
IS01BCE-ND - SMARTDISPLAY SUPER YELLOW LED
IS15SBFP4B-ND - SMARTSWITCH COMPACT WHITE LED
IS15SBCP4EF-ND - SMARTSWITCH COMPACT YEL/GRN LED
IS15SACP4CF-ND - SMARTSWITCH COMPACT RED/GRN LED
IS15ABFP4B-ND - SMARTSWITCH STD BLK W/WHITE LED
IS15ABDP4B-ND - SMARTSWITCH STD BLU W/WHITE LED
IS15ABDP4EG-ND - SMARTSWITCH STD YELLOW/BLUE LED
IS15ABDP4E-ND - SMARTSWITCH STD BLUE W/YEL LED
IS15ABCP4EF-ND - SMARTSWITCH STD YEL/GRN LED
更多...
其它名称: 360-2427
IS-C1603 Intelligent Controller User
Manual
7850 East Gelding Drive ? Scottsdale, AZ 85260-3420
Flag Byte C bit settings:
B0=0 ---> No transmission.
B0=1 ---> Upon switch release, transmit the assigned address of the switch in ASCII HEX format.
B1=0 ---> No transmission.
B1=1 ---> Upon switch release, transmit the assigned address’s user-defined Image release data
string.
B2=0 ---> No transmission.
B2=1 ---> Upon switch release, transmit the switch’s user-defined switch release data string.
B3=0 ---> Disable
B3=1 ---> Enable repeat sending of user-defined Image press data string while the switch is pressed.
For this feature to work in addition to this flag, Bit 3 of Flag-A has to be enabled and
there has to be proper data in the look-up table.
B4=0 ---> Normal communication.
B4=1---> Enable multi-drop. For RS422
The controllers ignore all the received data unless the communication is initiated. To
initiate communication FFH followed by the controller’s UNIT ID in HEX must be
received. After communication is initiated controller accept the commands normally. If
the controller receives an FEH the communication is terminated. Controller responses can
be controlled by enabling Bits 4&7 of FLAG-B.
B5
---> Reserved. Must be set to zero. RS422 future use.
B6=0 ---> Disable timer for command 26H.
B6=1 ---> Enable timer for command 26H. Controller starts the timer after each option if the timer is
expired before a new option or exit received, the controller terminates the command 26H
subroutine ant transmit 6EH. The timer is user defined. It is recommended during
operation this flag to be enabled.
B7=0 ---> Normal operation mode.
B7=1 ---> Continuous command operation mode. Turns the user-defined timer after each
command. If the timer expires before the controller receives the next command,
blinking red codes are put into the LCD/LED code refresh Buffer for all the switches.
This is for applications in which the host continuously communicates with the
controller. Blinking red indicate to the operator that controller is off line.
IS-C1603 Intelligent Controller User Manual D.doc
Toll Free 1.877.2BUYNKK (877.228.9655) ? Phone 480.991.0942 ? Fax 480.998.1435
www.nkkswitches.com ? Email engineering@nkkswitches.com
Page 31 of 52
0110
相关PDF资料
PDF描述
IS-L0205-C LOGIC BOARD FOR 36X24 LCD
IS-L02H2-C BOARD LOGIC 2 HI RES SW SOCKETS
IS-L02L1-C BOARD LOGIC 2 OLED SW SOCKETS
IS15AACP4CF SMARTSWITCH STD YEL RED/GRN LED
IS15ABCP4EF SMARTSWITCH STD YEL/GRN LED
相关代理商/技术参数
参数描述
IS-C1603-CONTROLLER 功能描述:CTLR FOR 16 STD SMART SWITCHES RoHS:是 类别:开关 >> 配件 系列:- 标准包装:100 系列:- 其它名称:886.0007886.0007-ND
IS-C1603H 功能描述:交换机开发工具 RoHS:否 制造商:NKK Switches 工具用于评估:Smart Switch - Compact RGB 工作电压: 最大工作温度:
ISC1812 制造商:VISHAY 制造商全称:Vishay Siliconix 功能描述:Surface Mount, Molded, Shielded Inductors
ISC-1812 制造商:VISHAY 制造商全称:Vishay Siliconix 功能描述:Surface Mount, Molded, Shielded Inductors