参数资料
型号: ISD5008PY
厂商: Nuvoton Technology Corporation of America
文件页数: 11/54页
文件大小: 0K
描述: IC VOICE REC/PLAY 4-8MIN 28-DIP
标准包装: 15
系列: ISD5008
接口: SPI/Microwire
滤波器通频带: 1.7 ~ 3.4kHz
持续时间: 4-8 分钟
安装类型: 通孔
封装/外壳: 28-DIP(0.600",15.24mm)
供应商设备封装: 28-DIP
产品目录页面: 630 (CN2011-ZH PDF)
配用: ISD-ES511-ND - EVALUATION SYSTEM FOR ISD5100
ISD-ES501-ND - EVALUATION SYSTEM FOR ISD5008
ISD5008
Publication Release Date: Oct 31 2008
- 19 -
Revision 1.2
6.4
SERIAL PERIPHERAL INTERFACE (SPI) DESCRIPTION
The ISD5008 product operates from a SPI serial interface, which operates with the following protocol:
The data transfer protocol assumes that the microcontroller’s SPI shift registers are clocked on the
falling edge of the SCLK. However, for the ISD5008, data is clocked into the MOSI pin at the rising
clock edge, while data is clocked out onto the MISO pin at the falling clock edge.
1. All serial data transfers begin with the falling edge of SS pin.
2. SS is held LOW during all serial communications and held HIGH between instructions.
3. Data is clocked in on the rising clock edge and data is clocked out on the falling clock edge.
4. Play and Record operations are initiated by enabling the device by asserting the SS pin LOW,
shifting in an opcode and an address field to the ISD5008 device (refer to the Opcode
Summary of Table 6).
5. The opcodes and address fields are as follows: <8 control bits> and <16 address bits>.
6. Each operation that ends in an EOM or Overflow will generate an interrupt, including the
Message Cueing cycles. The Interrupt will be cleared the next time an SPI cycle is completed.
7. As Interrupt data is shifted out of the ISD5008 MISO pin, control and address data is
simultaneously being shifted into the MOSI pin. Care should be taken such that the data
shifted in is compatible with current system operation. It is possible to read interrupt data and
start a new operation within the same SPI cycle.
8. A record or playback operation begins with the RUN bit set and the operation ends with the
RUN bit reset.
9. All operations begin with the rising edge of SS.
6.4.1
Message Cuing
Message cueing allows the user to skip through messages, without knowing the actual physical
location of the message. This operation is used during playback. In this mode, the messages are
skipped 1600 times faster than in normal playback mode. It will stop when an EOM marker is reached.
Then, the internal address counter will point to the next message.
相关PDF资料
PDF描述
VI-24H-CV-S CONVERTER MOD DC/DC 52V 150W
73S1209F-44IMR/F IC SMART CARD READER 44-QFN
VE-B3Y-IV-F3 CONVERTER MOD DC/DC 3.3V 99W
VI-243-CV-S CONVERTER MOD DC/DC 24V 150W
MAXQ622G-0000+ IC MCU 16BIT 128KB IR MOD 64LQFP
相关代理商/技术参数
参数描述
ISD5008S 功能描述:IC VOICE REC/PLAY 4-8MIN 28-SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD5008 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD5008SD 制造商:未知厂家 制造商全称:未知厂家 功能描述:SINGLE CHIP VOICE RECORD PLAYBACK DEVICE 4-, 5-, 6-, AND 8- MINUTE DURATIONS
ISD5008SERIES 制造商:未知厂家 制造商全称:未知厂家 功能描述:Single-Chip Voice Record/Playback Device
ISD5008SI 功能描述:IC VOICE REC/PL 4-8MIN IN 28SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD5008 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD5008SIR 功能描述:IC VOICE REC/PL 4-8MIN IN 28SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD5008 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000