参数资料
| 型号： | ISL55100AIRZ-T |
| 厂商： | Intersil |
| 文件页数： | 11/14页 |
| 文件大小： | 0K |
| 描述： | IC COMP DRVR/WINDOW 18V 72-QFN |
| 标准包装： | 1 |
| 系列： | * |
6
FN7486.2
November 24, 2008
POWER SUPPLIES, DRIVER/RECEIVER STATIC CONDITIONS VEXT = VEE + 5.5V, EXTERNAL LOGIC POWER OPTION USED. (Notes 8, 9)
Positive Supply Current
ICC
VCC = VH = 12V, VEE = VL = -3V,
VEXT =VEE + 5.5V, Outputs Unloaded
-35
50
mA
Negative Supply Current
IEE
VCC = VH = 12V, VEE = VL = -3V,
VEXT =VEE + 5.5V, Outputs Unloaded
-50
-35
-
mA
VEXT Supply Current
IEXT
VCC = VH = 12, VEE = VL = -3V,
VEXT =VEE + 5.5V, Outputs Unloaded
-25
40
mA
NOTES:
4. Lab characterization, room temp, Timing Parameters Matched Stimulus/Loads, Channel to Channel Skew < 500ps, 1ns Max by design.
5. Measured across 100pF/1k lump sum load + 15pF PCB/Scope Probe. Capacitor and Resistor Surface Mount/Stacked ~0.5inch from Pin.
6. To Enable LOWSWING, connect LOWSWING to VEE and keep VH < VEE + 5. To disable LOWSWING, connect it to VCC.
7. When VEXT is connected to VEE (External Device Power not used) then the Minimum VCC - VEE is 12V. When VEXT is connected to an external
5.5V supply, then the minimum VCC - VEE voltage is 9.0V. Recommended VEXT = 5.5V as referenced to VEE
8. ICC and IEE values are based on static conditions and will increase with pattern rates. ICC and IEE reach 400mA to 500mA at maximum data
rates (provided sufficient device cooling is employed). These currents can be reduced by: Reducing the VCC - VEE operating voltage or by
Utilizing the VEXT option.
9. When using VEXT = 5.5V, current requirements of the VEXT input can approach 100mA at maximum pattern rates.
10. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established by characterization
and are not production tested.
Test Circuits and Waveforms
FIGURE 1. DRIVER SWITCHING TEST CIRCUIT
FIGURE 2. DRIVER PROPAGATION DELAY AND TRANSITION TIME MEASUREMENT POINTS
Electrical Specifications
Test Conditions: VCC = 12V, VEE = -3V, VH = 6V, VL = 0V, Comp-High = 5V, Comp-Low = 0V, V5V = VEE and
LOWSWING = VCC. (Continued)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
UNITS
VO
DATA-
DRV EN+
DRV EN-
VH
VL
DOUT
DATA+
1k
Ω
(NOTE 2)
100pF
VO
400mV
0V
tPDLH
VOH (≈VH)
VOL (≈VL)
50%
tPDHL
DATA-
DATA+
tR
tF
DATA = 1
DATA = 0
ISL55100A
相关PDF资料 |
PDF描述 |
|---|---|
| ISL55100BIRZ | IC COMP DRVR/WINDOW 18V 72-QFN |
| ISL5627INZ | IC DAC DUAL 8BIT 3.3V 48-LQFP |
| ISL5629/2INZ | IC DAC 8BIT CMOS DUAL 48LQFP |
| ISL5727INZ | IC DAC DUAL 10BIT 3.3V 48-LQFP |
| ISL5729/2INZ | IC DAC 10BIT CMOS DUAL 48LQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISL55100B | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Quad 18V Pin Electronics Driver/Window Comparator |
| ISL55100BEVAL3 | 功能描述:EVAL BOARD 3 FOR ISL55100B RoHS:否 类别:编程器，开发系统 >> 评估演示板和套件 系列:* 标准包装:1 系列:PSoC® 主要目的:电源管理，热管理 嵌入式:- 已用 IC / 零件:- 主要属性:- 次要属性:- 已供物品:板，CD，电源 |
| ISL55100BIRZ | 功能描述:IC COMP DRVR/WINDOW 18V 72-QFN RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:发射器 驱动器/接收器数:4/0 规程:RS422，RS485 电源电压:4.75 V ~ 5.25 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ISL55100BIRZ-T | 功能描述:IC COMP DRVR/WINDOW 18V 72-QFN RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:发射器 驱动器/接收器数:4/0 规程:RS422，RS485 电源电压:4.75 V ~ 5.25 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ISL55110 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual, High Speed MOSFET Driver |
发布紧急采购，3分钟左右您将得到回复。