参数资料
型号: KSZ8864RMNI
厂商: Micrel Inc
文件页数: 1/111页
文件大小: 0K
描述: IC ETHERNET SWITCH 4PORT 64QFN
特色产品: KSZ8864RMN Ethernet Switches
标准包装: 348
系列: *
其它名称: 576-3995
KSZ8864RMN
Integrated 4-Port 10/100 Managed Switch
with Two MACs MII or RMII Interfaces
Rev 1.5
Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (
408) 944-0800 fax + 1 (408) 474-1000 http://www.micrel.com
April 2012
M9999-043012-1.5
General Description
The KSZ8864RMN is a highly-integrated, Layer 2
managed 4-port switch with optimized design, plentiful
features and smallest package size. It is designed for cost-
sensitive 10/100Mbps 4-port switch systems with on-chip
termination,
lowest-power
consumption,
and
small
package to save system cost. It has 1.4Gbps high-
performance memory bandwidth, shared memory-based
switch fabric with full non-blocking configuration. It also
provides an extensive feature set such as the power
management, programmable rate limiting and priority ratio,
tag/port-based VLAN, packet filtering, quality of service
(QoS), four queue prioritization, management interface,
MIB counters. Port 3 and Port 4 support either MII or RMII
interfaces with SW3-MII/RMII and SW4-MII/RMII (see
Functional Diagram) for KSZ8864RMN data interface. An
industrial temperature-grade version of the KSZ8864RMNI
and a qualified AEC-Q100 Automotive version of the
KSZ8864RMNU are also available (see “Ordering
Information” section).The KSZ8864RMN provides multiple
CPU control/data interfaces to effectively address both
current and emerging fast Ethernet applications.
The KSZ8864RMN consists of 10/100 fast Ethernet PHYs
with patented and enhanced mixed-signal technology,
media access control (MAC) units, a high-speed non-
blocking switch fabric, a dedicated address lookup engine,
and an on-chip frame buffer memory.
The KSZ8864RMN contains four MACs and two PHYs.
The two PHYs support the 10/100Base-T/TX.
All registers of MACs and PHYs units can be managed by
the control interface of SPI or the SMI. MIIM registers of
the PHYs can be accessed through the MDC/MDIO
interface. EEPROM can set all control registers by I
2C
controller interface for the unmanaged mode.
Datasheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Functional Diagram
相关PDF资料
PDF描述
KSZ8873FLLI IC ETHERNET SWITCH 3PORT 64LQFP
KSZ8873MLLJ IC ETHERNET SWITCH 3PORT 64LQFP
KSZ8873MMLI IC ETHERNET SWITCH 3PORT 64LQFP
KSZ8893FQL IC SWITCH FAST ETH 3PORT 128PQFP
KSZ8895MQI IC ETHERNET SWITCH 5PORT 128PQFP
相关代理商/技术参数
参数描述
KSZ8864RMNU 功能描述:以太网 IC 4-Port 10/100BT Switch with MII/RMII (Automotive) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8864RMNU TR 制造商:Micrel Inc 功能描述:IC ETHERNET SWITCH 4PORT 64MLF
KSZ8873FLL 功能描述:以太网 IC 3-Port Fast Ethernet Switch with 2x FX Ports - Lead free RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8873FLL-EVAL 功能描述:以太网开发工具 3-Port Fast Ethernet Switch with 2x FX Ports - Evaluation Board RoHS:否 制造商:Micrel 产品:Evaluation Boards 类型:Ethernet Transceivers 工具用于评估:KSZ8873RLL 接口类型:RMII 工作电源电压:
KSZ8873FLLI 功能描述:以太网 IC 3-Port Fast Ethernet Switch with 2x FX Ports (Industrial Grade) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray