参数资料
| 型号： | KSZ8995M |
| 厂商： | Micrel Inc |
| 文件页数： | 19/73页 |
| 文件大小： | 0K |
| 描述： | IC SWITCH 10/100 5PORT 128PQFP |
| 标准包装： | 66 |
| 系列： | * |
| 类型： | * |
| 应用： | * |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 128-BFQFP |
| 供应商设备封装： | 128-PQFP（14x20） |
| 包装： | 托盘 |
| 产品目录页面： | 1081 (CN2011-ZH PDF) |
| 配用： | 576-1607-ND - BOARD EVAL EXPERIMENT KSZ8995MA |
| 其它名称： | 576-1038 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页当前第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页
KS8995M
Micrel
M9999-120403
26
December 2003
Late Collision
If a transmit packet experiences collisions after 512-bit times of the transmission, the packet will be dropped.
Illegal Frames
The KS8995M discards frames less than 64 bytes and can be programmed to accept frames up to 1536 bytes in register 4.
For special applications, the KS8995M can also be programmed to accept frames up to 1916 bytes in register 4. Since the
KS8995M supports VLAN tags, the maximum sizing is adjusted when these tags are present.
Flow Control
The KS8995M supports standard 802.3x flow control frames on both transmit and receive sides.
On the receive side, if the KS8995M receives a pause control frame, the KS8995M will not transmit the next normal frame until
the timer, specified in the pause control frame, expires. If another pause frame is received before the current timer expires,
the timer will be updated with the new value in the second pause frame. During this period (being flow controlled), only flow
control packets from the KS8995M will be transmitted.
On the transmit side, the KS8995M has intelligent and efficient ways to determine when to invoke flow control. The flow control
is based on availability of the system resources, including available buffers, available transmit queues and available receive
queues.
The KS8995M will flow control a port, which just received a packet, if the destination port resource is being used up. The
KS8995M will issue a flow control frame (XOFF), containing the maximum pause time defined in IEEE standard 802.3x. Once
the resource is freed up, the KS8995M will send out the other flow control frame (XON) with zero pause time to turn off the
flow control (turn on transmission to the port). A hysteresis feature is provided to prevent the flow control mechanism from being
activated and deactivated too many times.
The KS8995M will flow control all ports if the receive queue becomes full.
Half-Duplex Back Pressure
A half-duplex back pressure option (note: not in 802.3 standards) is also provided. The activation and deactivation conditions
are the same as the above in full-duplex mode. If back pressure is required, the KS8995M will send preambles to defer the
other stations’ transmission (carrier sense deference). To avoid jabber and excessive deference defined in 802.3 standard,
after a certain time it will discontinue the carrier sense but it will raise the carrier sense quickly. This short silent time (no carrier
sense) is to prevent other stations from sending out packets and keeps other stations in carrier sense deferred state. If the port
has packets to send during a back pressure situation, the carrier-sense-type back pressure will be interrupted and those
packets will be transmitted instead. If there are no more packets to send, carrier-sense-type back pressure will be active again
until switch resources are free. If a collision occurs, the binary exponential backoff algorithm is skipped and carrier sense is
generated immediately, reducing the chance of further colliding and maintaining carrier sense to prevent reception of packets.
To ensure no packet loss in 10BaseT or 100BaseTX half-duplex modes, the user must enable the following:
Aggressive backoff (register 3, bit 0)
No excessive collision drop (register 4, bit 3)
Back pressure (register 4, bit 5)
These bits are not set as the default because this is not the IEEE standard.
Broadcast Storm Protection
The KS8995M has an intelligent option to protect the switch system from receiving too many broadcast packets. Broadcast
packets will be forwarded to all ports except the source port, and thus use too many switch resources (bandwidth and available
space in transmit queues). The KS8995M has the option to include “multicast packets” for storm control. The broadcast storm
rate parameters are programmed globally, and can be enabled or disabled on a per port basis. The rate is based on a 50ms
interval for 100BT and a 500ms interval for 10BT. At the beginning of each interval, the counter is cleared to zero, and the rate
limit mechanism starts to count the number of bytes during the interval. The rate definition is described in Register 6 and
Register 7. The default setting for registers 6 and 7 is 0x4A, which is 74 decimal. This is equal to a rate of 1%, calculated as
follows:
148,800 frames/sec
× 50ms/interval × 1% = 74 frames/interval (approx.) = 0x4A
MII Interface Operation
The MII (Media Independent Interface) is specified by the IEEE 802.3 committee and provides a common interface between
physical layer and MAC layer devices. The KS8995M provides two such interfaces. The MII-P5 interface is used to connect
to the fifth PHY, whereas the MII-SW interface is used to connect to the fifth MAC. Each of these MII interfaces contains two
distinct groups of signals, one for transmission and the other for receiving. Table 5 describes the signals used in the MII-P5
interface.
相关PDF资料 |
PDF描述 |
|---|---|
| RSM40DTAT | CONN EDGECARD 80POS R/A .156 SLD |
| LFEC6E-3QN208C | IC FPGA 6.1KLUTS 147I/O 208-PQFP |
| LFEC6E-3Q208C | IC FPGA 6.1KLUTS 147I/O 208-PQFP |
| RMM40DTAT | CONN EDGECARD 80POS R/A .156 SLD |
| LFXP3E-5Q208C | IC FPGA 3.1KLUTS 136I/O 208-PQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| KSZ8995MA | 功能描述:以太网 IC 5 Port 10/100 Switch with PHY and Frame Buffers (Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray |
| KSZ8995MA4 | 功能描述:IC SWITCH 5-PORT 10/100 128PQFP RoHS:是 类别:集成电路 (IC) >> 专用 IC 系列:* 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:调帧器 应用:数据传输 安装类型:表面贴装 封装/外壳:400-BBGA 供应商设备封装:400-PBGA（27x27） 包装:散装 |
| KSZ8995MAB3 | 功能描述:IC SWITCH 5-PORT 10/100 128PQFP RoHS:是 类别:集成电路 (IC) >> 专用 IC 系列:* 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:调帧器 应用:数据传输 安装类型:表面贴装 封装/外壳:400-BBGA 供应商设备封装:400-PBGA（27x27） 包装:散装 |
| KSZ8995MA-EVAL | 功能描述:以太网开发工具 KSZ8995MA Evaluation Board RoHS:否 制造商:Micrel 产品:Evaluation Boards 类型:Ethernet Transceivers 工具用于评估:KSZ8873RLL 接口类型:RMII 工作电源电压: |
| KSZ8995MAI | 功能描述:以太网 IC 5 Port 10/100 Switch with PHY and Frame Buffers (Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray |
发布紧急采购，3分钟左右您将得到回复。