参数资料
型号: L5994A
厂商: STMICROELECTRONICS
元件分类: 稳压器
英文描述: 1 A DUAL SWITCHING CONTROLLER, 345 kHz SWITCHING FREQ-MAX, PQFP32
封装: TQFP-32
文件页数: 9/26页
文件大小: 322K
代理商: L5994A
Obsolete
Product(s)
- Obsolete
Product(s)
17/26
L5994 - L5994A
Input Capacitors
A pulsed current (with zero average value) flows through the input capacitor of a buck converter. The AC com-
ponent of this current is quite high and dissipates a considerable amount of power on the ESR of the capacitor:
It is easy to find that PCIN has a maximum equal to IOUT/2 (@ VIN=2×VOUT, that is, 50% duty cycle). The
input capacitor of each section, therefore, should be selected for a RMS ripple current rating as high as half the
respective maximum output current. The capacitance value is not very important but in reality a minimum value
must be ensured for stability reasons. In fact, switching regulators exhibit a negative input impedance that, at
low frequencies, is:
thus, if the impedance of the power source is not well below the absolute value of ZIN(DC) at frequencies up to
the bandwidth of the regulator control loop, there is the possibility for oscillations. To ensure stability, the follow-
ing condition must be satisfied:
where LEQ is the inductance of the circuit upstream the switching regulator input and ESRIN is related to the
input capacitor itself.The use of high performance electrolytic capacitors is recommended. If a higher cost is of
no concern, OS-CON capacitors are an excellent choice because they offer the smallest size for a given ESR
or current rating. Tantalum capacitors do not tolerate pulsed current, so their use is not advisable.
Output Capacitors
The output capacitor selection is based on the output voltage ripple requirements. This ripple is related to the
current ripple through the inductor and is almost entirely due to the ESR of the output capacitor. Therefore, the
goal is to achieve an ESR lower than a certain value, regardless of the actual capacitance value.
The maximum current ripple of the +3.3V section is:
IL3 = 2 (IL3PK - IOUT3)
considering the values obtained in the paragraph "+3.3V inductor". As for the +5.1V, the maximum ripple is giv-
en by:
where VIN is VINMIN or VINMAX, as selected in the "+5.1 transformer" section.
Anyhow, the maximum ESR will be:
where the subscript x refers to either section.
In pulse-skipping operation, the capacitive component of the output ripple is comparable to the resistive one,
Pc
IN
ESR I
OUT
2
V
OUT
V
IN
V
OU T
()
V
IN
2
-------------------------------------------------------
=
Z
IN D C
()
V
IN
2
V
OUT
I
OUT
--------------------------------
=
C
IN
L
EQ
ESR
IN
Z
IN D C
()
-----------------------------------------------
I
L5
η I
OUT 12
V
IN
V
IN
5.1
-----------------------
3
4
---
5.1
V
IN
5.1
()
f
SW
L
3P
V
IN
-----------------------------------------
+
=
ESR
X
V
RPKX
I
LX
------------------
相关PDF资料
PDF描述
L5994 1 A DUAL SWITCHING CONTROLLER, 345 kHz SWITCHING FREQ-MAX, PQFP32
L6206PD013TR STEPPER MOTOR CONTROLLER, 5.6 A, PDSO36
L6207PD013TR STEPPER MOTOR CONTROLLER, 5.6 A, PDSO36
L6219DSA STEPPER MOTOR CONTROLLER, 1 A, PDSO24
L6228PDTR STEPPER MOTOR CONTROLLER, 2.8 A, PDSO36
相关代理商/技术参数
参数描述
L5995 制造商:未知厂家 制造商全称:未知厂家 功能描述:Current-Mode SMPS Controller
L5996 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:5 BIT DYNAMIC DAC CONTROLLER FOR MOBILE CPU
L-59BL/1EGW 制造商:Kingbright Corporation 功能描述: 制造商:Kingbright Corporation 功能描述:LED 5MM RED/GREEN 40MCD/60MCD 制造商:Kingbright Corporation 功能描述:LED, 5MM, RED/GREEN, 40MCD/60MCD 制造商:Kingbright Corporation 功能描述:LED, 5MM, RED/GREEN, 40MCD/60MCD, LED Colour:Red, Green, Height:7.24mm, Width:7. 制造商:Kingbright Corporation 功能描述:Red/grn r/a cbi,5mm,L-59BL/1EGW
L-59BL/1EYW 制造商:Kingbright Corporation 功能描述: 制造商:Kingbright Corporation 功能描述:LED 5MM RED/YELLOW 40MCD/40MCD 制造商:Kingbright Corporation 功能描述:LED, 5MM, RED/YELLOW, 40MCD/40MCD 制造商:Kingbright Corporation 功能描述:LED, 5MM, RED/YELLOW, 40MCD/40MCD, LED Colour:Red, Yellow, Height:7.24mm, Width:
L-59BL/1GEW 制造商:Kingbright Corporation 功能描述: