- 您现在的位置：买卖IC网 > PDF目录97995 > L6615N (STMICROELECTRONICS) 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDIP8 PDF资料下载
参数资料
| 型号： | L6615N |
| 厂商： | STMICROELECTRONICS |
| 元件分类： | 电源管理 |
| 英文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDIP8 |
| 封装： | MINI, DIP-8 |
| 文件页数： | 12/20页 |
| 文件大小： | 394K |
| 代理商： | L6615N |
L6615
2/20
DESCRIPTION (continued)
Load sharing is a technique used in all the systems in which the load requires low voltage, high current
and/or redundancy; for this reason a modular power system is necessary in which two or more power sup-
plies or DC-DC converters are paralleled.
The device is able to perform both high side and low side current sensing, that is the sense current resistor
can be placed either in series to the power supplies output or on the ground return.
The L6615 then drives the share bus to a voltage proportional to the output current of the master that is
to the highest amongst the output currents delivered by the paralleled power supplies.
The share bus dynamics is independent of the power supply output voltage and is clamped only by the
device supply voltage (VCC).
The output voltage of the other paralleled power supplies (slaves) is then trimmed by the ADJ pin so that
they can support their amount of load current. The slave power supplies work as current-controlled current
sources.
Sharing the output currents is useful for equalizing also the thermal stress of the different modules and
providing an advantage in term of reliability.
Moreover the paralleled supplies architecture allows achieving redundancy; the failure of one of the mod-
ules can be tolerated until the capability of the remaining power supplies is enough to provide the required
load current.
PIN DESCRIPTION
N°
Pin
Function
1
GND
Ground.
2
CS-
Input of current sense amplifier; it is connected to the negative side of the sense resistor through
a resistor (RG2).
3
CS+
Input of current sense amplifier. A resistor (RG1, of the same value as RG2) is placed between
this pin and the positive side of the sense resistor: its value defines the transconductance gain
between ICGA and VSENSE.
4
ADJ
Output of Adjust amplifier; it is connected to both the load (through a resistor RADJ) and to the
positive remote sense pin of the power system. This pin is an open collector diverting (from the
feedback path) a current proportional to the difference between the current supplied to the load
by the relevant power supply and the current supplied by the master.
5
COMP
Output of the current sharing (transconductance) error amplifier and input of ADJ amplifier.
Typically, a compensation network is placed between this pin and ground. The maximum voltage
is internally clamped to 1.5V (typ.)
6
SH
Share bus pin. During the power supply
slave operation, this pin acts as positive input from
share bus. During power supply
master operation, it drives the share bus to a voltage
proportional to the load current.
The
share bus connects the SH pins of all the paralleled modules. A capacitor between this pin
and GND could be useful to reduce the noise present on the share bus.
7
CGA
Current Gain Adjust pin; current sense amplifier output. A resistor connected between this pin
and ground defines the maximum voltage on the share bus and sets the gain of the current
sharing system.
8VCC
Supply voltage of the IC.
相关PDF资料 |
PDF描述 |
|---|---|
| L6711TR | 2 A SWITCHING CONTROLLER, 178 kHz SWITCHING FREQ-MAX, PQFP48 |
| L6711 | 2 A SWITCHING CONTROLLER, 178 kHz SWITCHING FREQ-MAX, PQFP48 |
| L6714TR | SWITCHING CONTROLLER, 170 kHz SWITCHING FREQ-MAX, PQFP64 |
| L6714 | SWITCHING CONTROLLER, 170 kHz SWITCHING FREQ-MAX, PQFP64 |
| L6725TR | 20 A SWITCHING CONTROLLER, 500 kHz SWITCHING FREQ-MAX, PDSO16 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| L6622-01 | 制造商:HAMAMATSU 制造商全称:Hamamatsu Corporation 功能描述:130 KV MICROFOCUS X-RAY SOURCE |
| L-663 | 制造商:RHOMBUS-IND 制造商全称:Rhombus Industries Inc. 功能描述:CURRENT SENSE INDUCTOR |
| L6-6330 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| L6660 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:MILLI-ACTUATOR DRIVER |
| L6668 | 功能描述:电流型 PWM 控制器 SMART PRIMARY CONTROLLER RoHS:否 制造商:Texas Instruments 开关频率:27 KHz 上升时间: 下降时间: 工作电源电压:6 V to 15 V 工作电源电流:1.5 mA 输出端数量:1 最大工作温度:+ 105 C 安装风格:SMD/SMT 封装 / 箱体:TSSOP-14 |
发布紧急采购，3分钟左右您将得到回复。