- 您现在的位置：买卖IC网 > PDF目录30715 > LA1862M FM, AUDIO DEMODULATOR, PDSO36 PDF资料下载
参数资料
| 型号： | LA1862M |
| 元件分类： | 接收器 |
| 英文描述： | FM, AUDIO DEMODULATOR, PDSO36 |
| 封装： | MFP-36 |
| 文件页数： | 8/27页 |
| 文件大小： | 810K |
| 代理商： | LA1862M |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页
MPX Block
1.
The variable resistor between pins 26 and 28 is for
adjusting separation.
2.
The ceramic oscillator must be a Murata F23. The use of
other oscillators leads to frequency discrepancies and
spurious oscillations.
3.
Pin 14 is the SNC control input. It uses the S-meter output
from pin 1 to automatically vary the stereo separation with
the input signal strength. It is also possible to reduce noise
resulting from weak stereo signals.
4.
Pin 13 is the HCC control input. It uses the S-meter
output from pin 1 to automatically vary the multiplexer
output high-frequency characteristic with the input signal
strength. The capacitor at pin 12 determines the maximum
attenuation for this band. Too big a capacitance, however,
will degrade music quality and make the audibility
unstable during reception.
5.
Pin 24 is the 19 kHz pilot signal input. Capacitively
couple the 19 kHz component from pin 11 to pin 24.
6.
Pin 25 is the stereo lamp signal. Current flows only for
stereo signals. Leaving the pin open forces monaural
operation.
7.
The VCO always operates during both stereo and monaural
operation.
8.
Pins 15 and 16 are the left- and right-channel outputs. The capacitors at these pins determine the amount of deemphasis —
50 μs using 0.015 μF, and 75 μs using 0.022 μF.
9.
Pin 18 is the pilot cancel signal output. Adjust the variable resistor between pins 17 and 18 to minimize the 19 kHz pilot
signal components in the left- and right-channel outputs for correct channel balance.
10. When adjusting the pilot cancel signal output, connect a 20 kHz lowpass filter (for example, a DIN audio filter) to the
multiplexer output to remove the 38 kHz component and prevent its affect on the process of minimizing the 19 kHz
component.
11. The capacitor connected to pin 34 is used to detect the pilot cancel signal. It should be connected to VCC or GND. In the
case of VCC, use a capacitor with no DC leakage.
Coil Specifications
Note: The dotted lines in the characteristics diagrams on the following pages represent device operation outside the device
specifications.
frequency
divider
(Toko)
For European markets
C = 100 pF internal
(Toko)
For North American and
Japanese markets
C = 51 pF Internal
For North American and
Japanese markets
C = 51 pF External
(Mitsumi)
For European markets
C = 100 pF External
LA1862M
No. 4092- 16/27
相关PDF资料 |
PDF描述 |
|---|---|
| LA1863M | 1-BAND, AUDIO TUNER, PQFP44 |
| LA1867NM | AM/FM, AUDIO DEMODULATOR, PQFP44 |
| LA1875M | AM/FM, AUDIO SINGLE CHIP RECEIVER, PDSO36 |
| LA1875M | AM/FM, AUDIO SINGLE CHIP RECEIVER, PDSO36 |
| LA1883M | AM/FM, AUDIO SINGLE CHIP RECEIVER, PQFP64 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LA1867NM | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Car Radio Single-Chip Tuner System |
| LA1867NM-MPB-E | 制造商:ON Semiconductor 功能描述: |
| LA186B-9SEF9UG-3-PF | 制造商:LIGITEK 制造商全称:LIGITEK electronics co., ltd. 功能描述:LED ARRAY |
| LA186B-9SEF-PF | 制造商:LIGITEK 制造商全称:LIGITEK electronics co., ltd. 功能描述:LED ARRAY |
| LA186B-DBK-2-PF | 制造商:LIGITEK 制造商全称:LIGITEK electronics co., ltd. 功能描述:LED ARRAY |
发布紧急采购，3分钟左右您将得到回复。