- 您现在的位置：买卖IC网 > PDF目录43902 > LB11820M BRUSHLESS DC MOTOR CONTROLLER, 0.04 A, PDSO30 PDF资料下载
参数资料
| 型号： | LB11820M |
| 元件分类： | 运动控制电子 |
| 英文描述： | BRUSHLESS DC MOTOR CONTROLLER, 0.04 A, PDSO30 |
| 封装： | 0.375 INCH, MFP-30 |
| 文件页数： | 9/17页 |
| 文件大小： | 484K |
| 代理商： | LB11820M |
PS No. 7104-17/17
LB11820M
This catalog provides information as of June, 2002. Specifications and information herein are subject to
change without notice.
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products (including technical data, services) described or contained
herein are controlled under any of applicable local export control laws and regulations, such products must
not be exported without obtaining the export license from the authorities concerned in accordance with the
above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
12. Forward/Reverse Rotation
To select forward or reverse in the rotation condition, a measure is taken to prevent flow of the through current
(through current due to the output Tr OFF delay time at selection) at the output. Selection during rotation causes the
current exceeding the current limit value to flow through the output Tr because of the motor coil resistance and motor
reverse electromotive voltage condition. It is therefore necessary to select the external output Tr that is not damaged
by this current or to select forward/reverse only when the motor rotation speed has decreased to a certain level.
13. Brake operation
Braking is made by setting the BR pin to the L level. Braking consists of a short-circuit brake condition in which all
of one-side outputs (UH, VH, or WH) are turned ON while other outputs (UL, VL, WL) are turned OFF. A measure
is taken to prevent flow of through current (through current due to output Tr OFF delay time at selection) when the
brake is operated or cancelled. While braking is made, current limiting and motor lock protection circuits are not
operative.
Short-circuit braking causes large current to flow through the output Tr because of motor coil resistance and the motor
reverse electromotive voltage condition during operation. It is therefore necessary to select the external output Tr that is
not damaged by this current or to activate braking only when the motor rotation speed has decreased to a certain level.
14. Power Supply Stabilization
This IC is of a switching drive type and the power line tends to be affected. It is therefore necessary to connect a
capacitor of sufficient capacity for stabilization between the VCC1 pin and GND.
To insert a diode in the power line to prevent breakdown through reverse connection of power supply, the power line
becomes more readily affected. It is necessary to select a larger capacity.
To turn ON/OFF the power supply with a switch, etc., large distance between the switch and capacitor causes
substantial deviation of the supply voltage due to the line inductance and inrush current into the capacitor. In certain
cases, the withstand voltage may be exceeded. In this case, do not use a ceramic capacitor whose series impedance is
low. Instead, use an electrolytic capacitor to suppress the inrush current and to prevent voltage rise.
15. VREG Stabilization
To stabilize the VREG voltage that is the power supply for the control circuit, connect a 0.1 F or more capacitor between
VREG and GND. The capacitor GND must be wired near the GND pin of IC as much as possible.
相关PDF资料 |
PDF描述 |
|---|---|
| LB11822 | BRUSHLESS DC MOTOR CONTROLLER, 3.1 A, DFM28 |
| LB11823M | BRUSHLESS DC MOTOR CONTROLLER, 0.04 A, PDSO36 |
| LB11847 | STEPPER MOTOR CONTROLLER, 1.75 A, PDIP28 |
| LB11868V | DISK DRIVE MOTOR CONTROLLER, PDSO20 |
| LB11870 | BRUSHLESS DC MOTOR CONTROLLER, 1.8 A, PDSO48 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LB11822 | 制造商:未知厂家 制造商全称:未知厂家 功能描述: |
| LB11822-E | 功能描述:马达/运动/点火控制器和驱动器 RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
| LB11823M | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Direct PWM Drive Brushless Motor Predriver for OA Products |
| LB11823M(36SOP) | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Controller Miscellaneous - Datasheet Reference |
| LB11824 | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Direct PWM Drive Brushless Motor Predriver for On-Demand Water Heater and Air Conditioner Motors |
发布紧急采购，3分钟左右您将得到回复。