- 您现在的位置：买卖IC网 > PDF目录97997 > LC72144M (SANYO SEMICONDUCTOR CO LTD) PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO24 PDF资料下载
参数资料
| 型号： | LC72144M |
| 厂商： | SANYO SEMICONDUCTOR CO LTD |
| 元件分类： | PLL合成/DDS/VCOs |
| 英文描述： | PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO24 |
| 封装： | MFP-24 |
| 文件页数： | 19/22页 |
| 文件大小： | 307K |
| 代理商： | LC72144M |
Pin Functions
No. 5377-6/22
LC72144M
Pin No.
Symbol
Type
Function
Pin circuit
24
1
16
15
2
4
3
5
17
19
9
8
23
12
14
13
XIN
XOUT
FMIN
AMIN
CE
CL
DI
DO
VDD
VSS
I/O-1
I/O-2
I/O-3
I/O-0
I/O-4
I/O-5
Xtal oscillator
Local oscillator
signal input
Local oscillator
signal input
Chip enable
Clock
Input data
Output data
Power supply
Ground
General-purpose
I/O ports
General-purpose
I/O ports
Crystal oscillator connection
(4.5, 7.2, 10.25, or 10.35 MHz)
FMIN is selected when DVS in the serial data input is set to 1.
The input frequency range is 10 to 160 MHz.
The signal is transmitted to the swallow counter.
The divisor can be set to a value in the range 272 to 65,535.
AMIN is selected when DVS in the serial data input is set to 0.
When SNS in the serial data input is set to 1:
The input frequency range is 2 to 40 MHz.
The signal is transmitted to the swallow counter.
The divisor can be set to a value in the range 272 to 65,535.
When SNS in the serial data input is set to 0:
The input frequency range is 0.5 to 10 MHz.
The signal is transmitted to the 12-bit programmable divider.
The divisor can be set to a value in the range 4 to 4,095.
This pin must be set high during serial data input (DI) to the
LC72144M, or during serial data output (DO).
Used for data synchronization during serial data input (DI) to
the LC72144M, or during serial data output (DO).
Used to input serial data transferred to the LC72144M from the
controller.
Used to output serial data transferred the controller from the
LC72144M.
The LC72144M power supply connection. Provide a voltage
between 4.5 and 5.5 V when the PLL circuit is in operation.
The power on reset circuit operates when power is first applied.
—
The LC72144M ground connection.
—
General-purpose I/O ports
The output circuits are open-drain circuits.
I/O-1 and I/O-2 are set to be input ports after the power on
reset. I/O-3 becomes an output port fixed at the low level.
These pins are switched between input and output by the I/O-1
to I/O-3 bits in the serial data transferred from the controller.
General-purpose I/O ports
The output circuits are complementary circuits.
These ports are set to be input ports after the power on reset.
These pins are switched between input and output by the I/O-0,
I/O-4, and I/O-5 bits in the serial data transferred from the
controller.
Continued on next page.
相关PDF资料 |
PDF描述 |
|---|---|
| LC72151V | PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO30 |
| LC7216M | PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO20 |
| LCP-10G3A4EDR | FIBER OPTIC TRANSCEIVER, 840-860nm, 10312.5Mbps(Tx), 10312.5Mbps(Rx), SURFACE MOUNT, LC CONNECTOR |
| LCP-10G3A4EDRH | FIBER OPTIC TRANSCEIVER, 840-860nm, 10312.5Mbps(Tx), 10312.5Mbps(Rx), SURFACE MOUNT, LC CONNECTOR |
| LCP-10G3B4QDR | FIBER OPTIC TRANSCEIVER, 1260-1355nm, 10000Mbps(Tx), 10000Mbps(Rx), SURFACE MOUNT, LC CONNECTOR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LC72146 | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:PLL Frequency Synthesizer for Electronic Tuning |
| LC72146M | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:PLL Frequency Synthesizer for Electronic Tuning |
| LC72146MA-AH | 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel |
| LC72146MHSQR-U-TRM-E | 制造商:Sony Semiconductor Solutions Division 功能描述: |
| LC72146V | 制造商:未知厂家 制造商全称:未知厂家 功能描述: |
发布紧急采购，3分钟左右您将得到回复。