- 您现在的位置：买卖IC网 > PDF目录44976 > LSN-T/16-W3H-C (MURATA POWER SOLUTIONS INC) 1-OUTPUT DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | LSN-T/16-W3H-C |
| 厂商： | MURATA POWER SOLUTIONS INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT, SIP-11/10 |
| 文件页数： | 3/8页 |
| 文件大小： | 215K |
| 代理商： | LSN-T/16-W3H-C |
Input
Input Voltage Range
3-5.5 Volts (5V nominal)
Input Current:
Normal Operating Conditions
See Ordering Guide
Inrush Transient
0.02A2 sec
Standby/Off Mode
8mA
Output Short-Circuit Condition
60-110mA average (model dependent)
Input Reected Ripple Current
10-20mAp-p, model dependent
Input Filter Type
Capacitive
Overvoltage Protection
None
Reverse-Polarity Protection
None. Install external fuse.
Undervoltage Shutdown
None
On/Off Control
On = open or low (<0.4V max.)
Off = high (>2.5V to VIN max.), 1mA
Output
VOUT Accuracy (50% load)
±1.5%
Temperature Coefcient
±0.02%/°C
Minimum Loading
No load
Maximum Capacitive Load
5000μF (electrolytic),
2000μF (0.02
: ESR, OSCON)
VOUT Trim Range
±10%
Ripple/Noise (20MHz BW)
See Ordering Guide
Total Accuracy
3% over line/load/temperature
Efciency
See Ordering Guide
Overcurrent Detection and Short-Circuit Protection:
Current-Limiting Detection Point
20-36 Amps (model dependent)
Short-Circuit Detection Point
98% of VOUT set
SC Protection Technique
Hiccup with auto recovery
Short-Circuit Current
600mA average
Dynamic Characteristics
Transient Response (50% load step)
30-70μsec to ±2% of nal value
(model dependent)
Start-Up Time:
VIN to VOUT and On/Off to VOUT
7msec
Switching Frequency
300 ±50kHz
Environmental
Calculated MTBF
TBD
Operating Temperature: (Ambient)
Without Derating (Natural convection) –40 to +63/71°C (model dependent,
see Derating Curves)
With Derating
See Derating Curves
PC-Board Temperature
+100°C maximum
Thermal Shutdown
+115°C (110 to 125°C)
Physical
Dimensions
See Mechanical Specications
Pin Dimensions/Material
0.112" x 0.062" (2.84 x 1.57mm) rectangular
tellurium copper alloy with 100-300
microinches of tin electroplate over
100 microinches of nickel underplate
Weight
0.28 ounces (7.8g)
Flamability Rating
UL94V-0
EMI
EN55022/CISPR22 (requires external lter)
Safety
UL/cUL/IEC/EN 60950-1, CSA-C22.2 No.234
All models are tested/specied with external 22μF tantalum input and output capacitors.These
capacitors are necessary to accommodate our test equipment and may not be required to achieve
specied performance in your applications. All models are stable and regulate within spec under
no-load conditions.
See Technical Notes and Performance Curves for details.
Performance/Functional Specications
Typical @ TA = +25°C under nominal line voltage and full-load conditions unless noted.
Input Voltage:
Continuous or transient
6 Volts (0.75, 1, 1.2, 1.5, 1.8, 2, 2.5 VOUT)
7 Volts (3.3VOUT and "T" models)
On/Off Control (Pin 1)
+VIN
Input Reverse-Polarity Protection
None. Install external fuse.
Output Overvoltage Protection
None
Output Current
Current limited. Devices can withstand
sustained output short circuits without
damage.
Storage Temperature
–40 to +125°C
Lead Temperature
See Reow Solder Prole
These are stress ratings. Exposure of devices to greater than any of these conditions may
adversely affect long-term reliability. Proper operation under conditions other than those listed in
the Performance/ Functional Specications Table is not implied.
Absolute Maximum Ratings
TECHNICAL NOTES
I/O Filtering and Noise Reduction
All models in the LSN W3 Series are tested and specied with external 22μF
tantalum input and output capacitors. These capacitors are necessary to
accommodate our test equipment and may not be required to achieve desired
performance in your application. The LSN’s are designed with high-quality,
high-performance internal I/O caps, and will operate within spec in most
applications with no additional external components.
In particular, the LSN’s input capacitors are specied for low ESR and are
fully rated to handle the units’ input ripple currents. Similarly, the internal
output capacitors are specied for low ESR and full-range frequency response.
In critical applications, input/output ripple/noise may be further reduced using
ltering techniques, the simplest being the installation of external I/O caps.
External input capacitors serve primarily as energy-storage devices. They
minimize high-frequency variations in input voltage (usually caused by IR drops
in conductors leading to the DC/DC) as the switching converter draws pulses of
current. Input capacitors should be selected for bulk capacitance (at appropri-
ate frequencies), low ESR, and high rms-ripple-current ratings. The switching
nature of modern DC/DC’s requires that the dc input voltage source have low
ac impedance at the frequencies of interest. Highly inductive source imped-
ances can greatly affect system stability. Your specic system conguration
may necessitate additional considerations.
The On/Off Control is designed to be driven with open-collector logic or the application of appropriate
voltages (referenced to Common, pin 3). Applying a voltage to On/Off Control when no input voltage is
applied to the converter may cause permanent damage.
Output noise may be further reduced with the installation of additional external output ltering. See
I/O Filtering and Noise Reduction.
MTBF’s are calculated using Telcordia SR-332(Bellcore), ground xed, TA = +25°C, full power,
natural convection, +67°C pcb temperature.
Input Ripple Current is tested/specied over a 5-20MHz bandwidth with an external 2 x 100μF input
capacitor and a simulated source impedance of 1000μF and 1μH. See I/O Filtering, Input Ripple
Current, and Output Noise for details.
Setting accuracy for LSN-T/16-W3 is ±2%.
Input voltage must be 4.5V minimum for 3.3V output.
Single Output LSN-W3 Models
Non-Isolated, 3-5.5VIN, 0.75-3.3VOUT
16 Amp DC/DC Converters
www.murata-ps.com
email: sales@murata-ps.com
10 Dec 2009
MDC_LSN W3 Models.A02 Page 3 of 8
相关PDF资料 |
PDF描述 |
|---|---|
| LSN2-T/22-D12 | DC-DC REG PWR SUPPLY MODULE |
| LSN2-T/22-D12G-C | DC-DC REG PWR SUPPLY MODULE |
| LSN2-T/22-D12NB-C | DC-DC REG PWR SUPPLY MODULE |
| LSN2-T/22-D12N | DC-DC REG PWR SUPPLY MODULE |
| LSN2-T/22-D12G | DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LSNUT-T6X2-F | 制造商:NANOTEC 功能描述:NUT T6X2 制造商:NANOTEC 功能描述:NUT, T6X2 |
| LS-NVP/B-W1 | 制造商:Black Box Corporation 功能描述:1 year warranty for LS-NVP/B |
| LS-NVP/B-W3 | 制造商:Black Box Corporation 功能描述:3 year warranty for LS-NVP/B |
| LSO(GOLD) | 制造商:PRECIC 功能描述: |
| LSOU | 功能描述:熔丝座 125V/15A Box Cover Units RoHS:否 制造商:Littelfuse 产品: 电流额定值:30 A 电压额定值:1000 VDC 极数:1 系列: 安装风格:DIN Rail 端接类型: 轴类型: 工作温度范围: |
发布紧急采购，3分钟左右您将得到回复。