参数资料
型号: LSN-T/16-W3H-C
厂商: MURATA POWER SOLUTIONS INC
元件分类: 电源模块
英文描述: 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
封装: ROHS COMPLIANT, SIP-11/10
文件页数: 7/8页
文件大小: 215K
代理商: LSN-T/16-W3H-C
LSN W3 DC/DC converters do not suffer from Output Reverse Conduction.
They employ proprietary gate drive circuitry that makes them immune to
moderate applied output overvoltages.
Thermal Considerations and Thermal Protection
The typical output-current thermal-derating curves shown below enable
designers to determine how much current they can reliably derive from each
model of the LSN W3 Series under known ambient-temperature and air-ow
conditions. Similarly, the curves indicate how much air ow is required to reli-
ably deliver a specic output current at known temperatures.
The highest temperatures in LSN W3’s occur at their output inductor, whose
heat is generated primarily by I2R losses. The derating curves were developed
using thermocouples to monitor the inductor temperature and varying the load
to keep that temperature below +110°C under the assorted conditions of air
ow and air temperature. Once the temperature exceeds +115°C (approx.), the
thermal protection will disable the converter. Automatic restart occurs after the
temperature has dropped below +110°C.
As you may deduce from the derating curves and observe in the efciency
curves on the following pages, LSN W3’s maintain virtually constant efciency
from half to full load, and consequently deliver very impressive temperature
performance even if operating at full load.
Lastly, when LSN W3’s are installed in system boards, they are obviously
subject to numerous factors and tolerances not taken into account here. If you
are attempting to extract the most current out of these units under demanding
temperature conditions, we advise you to monitor the output-inductor tempera-
ture to ensure it remains below +110°C at all times.
20 Amps Extended Operation
Under restricted conditions, the LSN W3 models with low output voltages
may produce up to 20 Amps of output current up to approximately +45°C
ambient temperature. There is no model number change. The Derating
curve illustrates typical performance. For this test, the converter was
mounted on a 12cm x12cm double-sided pc board with 2 ounce copper.
This 20 Amp operation is available with the following restrictions:
Only 1.2 Volt and 1.5 Volt output models are veried for operation at
this time.
The user must assure that there is adequate airow at all times with
no airow blockage by other large components. Make sure no adjacent
components have high temperatures. Be aware of systems using a
CPU temperature monitor to control the fan.
Use only low to moderate ambient temperature.
The user must assure that the total output power is not exceeded.
This operation applies only to nominal input line voltage. Since ef-
ciency degrades at low line voltage, internal heat dissipation increases,
thereby exceeding the maximum output power.
The Derating curve is drawn where the hot spot on the converter (usually
a power FET) reaches approximately +115°C. Although operation is possible
slightly beyond this point, DATEL strongly advises using this as the maxi-
mum temperature for greatest reliability.
Do not forget that a small overcurrent glitch while running 20 Amps output
could instantly shut down the converter using the Over Current sensor. This
margin of safety is considerably wider at 16 Amps maximum current. Make
sure your output current usage is smooth!! If you are in doubt, contact DATEL
to discuss your application.
Product Adaptations
Murata Power Solutions offers variations of our core product family. These
products are available under scheduled quantity orders and may also include
separate manufacturing documentation from a mutually-agreeable Product
Specication. Since these product adaptations largely share a common parts
list, similar specications and test methods with their root products, they are
provided at excellent costs and delivery. Please contact MPS for details.
As of this date, the following product is available:
LSN-T/16-W3HHL2-Y
This model includes conformal coating added, special pin length and RoHS-5
hazardous substance compliance (with lead).
Single Output LSN-W3 Models
Non-Isolated, 3-5.5VIN, 0.75-3.3VOUT
16 Amp DC/DC Converters
www.murata-ps.com
email: sales@murata-ps.com
10 Dec 2009
MDC_LSN W3 Models.A02 Page 7 of 8
相关PDF资料
PDF描述
LSN2-T/22-D12 DC-DC REG PWR SUPPLY MODULE
LSN2-T/22-D12G-C DC-DC REG PWR SUPPLY MODULE
LSN2-T/22-D12NB-C DC-DC REG PWR SUPPLY MODULE
LSN2-T/22-D12N DC-DC REG PWR SUPPLY MODULE
LSN2-T/22-D12G DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
LSNUT-T6X2-F 制造商:NANOTEC 功能描述:NUT T6X2 制造商:NANOTEC 功能描述:NUT, T6X2
LS-NVP/B-W1 制造商:Black Box Corporation 功能描述:1 year warranty for LS-NVP/B
LS-NVP/B-W3 制造商:Black Box Corporation 功能描述:3 year warranty for LS-NVP/B
LSO(GOLD) 制造商:PRECIC 功能描述:
LSOU 功能描述:熔丝座 125V/15A Box Cover Units RoHS:否 制造商:Littelfuse 产品: 电流额定值:30 A 电压额定值:1000 VDC 极数:1 系列: 安装风格:DIN Rail 端接类型: 轴类型: 工作温度范围: