- 您现在的位置：买卖IC网 > PDF目录10735 > LT1016IS8#PBF (Linear Technology)IC COMPARATOR 10NS HI-SPD 8-SOIC PDF资料下载
参数资料
| 型号： | LT1016IS8#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 3/20页 |
| 文件大小： | 0K |
| 描述： | IC COMPARATOR 10NS HI-SPD 8-SOIC |
| 标准包装： | 100 |
| 系列： | UltraFast™ |
| 类型： | 带锁销 |
| 元件数： | 1 |
| 输出类型： | CMOS，补充型，TTL |
| 电压 - 输入偏移（最小值）： | 3mV @ ±5V |
| 电流 - 输入偏压（最小值）： | 10µA @ ±5V |
| 电流 - 输出（标准）： | 20mA |
| 电流 - 静态（最大值）： | 35mA |
| CMRR, PSRR（标准）： | 96dB CMRR，75dB PSRR |
| 传输延迟（最大）： | 14ns |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 安装类型： | 表面贴装 |
| 包装： | 管件 |
LT1016
11
1016fc
applicaTions inForMaTion
“Fuzz” on the edges is the difficulty in Figure 10. This
condition appears similar to Figure 10, but the oscillation
is more stubborn and persists well after the output has
gone low. This condition is due to stray capacitive feed-
back from the outputs to the inputs. A 3k input source
impedance and 3pF of stray feedback allowed this oscil-
lation. The solution for this condition is not too difficult.
Keep source impedances as low as possible, preferably
1k or less. Route output and input pins and components
away from each other.
The opposite of stray-caused oscillations appears in
Figure 11. Here, the output response (Trace B) badly lags
the input (Trace A). This is due to some combination of
high source impedance and stray capacitance to ground
at the input. The resulting RC forces a lagged response
at the input and output delay occurs. An RC combination
of 2k source resistance and 10pF to ground gives a 20ns
time constant—significantly longer than the LT1016’s
responsetime.Keepsourceimpedanceslowandminimize
stray input capacitance to ground.
Figure 12 shows another capacitance related problem.
Here the output does not oscillate, but the transitions
are discontinuous and relatively slow. The villain of this
situation is a large output load capacitance. This could
be caused by cable driving, excessive output lead
length or the input characteristics of the circuit being
driven. In most situations this is undesirable and may be
eliminated by buffering heavy capacitive loads. In a few
circumstances it may not affect overall circuit operation
and is tolerable. Consider the comparator’s output load
characteristics and their potential effect on the circuit. If
necessary, buffer the load.
Figure 11. Stray 5pF Capacitance from
Input to Ground Causes Delay
Figure 12. Excessive Load Capacitance Forces Edge Distortion
Figure 10. 3pF Stray Capacitive Feedback
with 3k Source Can Cause Oscillation
2V/DIV
50ns/DIV
1016 F10
TRACE A
2V/DIV
TRACE B
2V/DIV
10ns/DIV
1016 F11
2V/DIV
100ns/DIV
1016 F12
相关PDF资料 |
PDF描述 |
|---|---|
| VE-2NT-IW | CONVERTER MOD DC/DC 6.5V 100W |
| MCP3421A2T-E/CH | IC ADC 18BIT 3.75SPS 1CH SOT23-6 |
| B37937K9561J60 | CAP CER 560PF 16V 5% NP0 0603 |
| MCP3421A1T-E/CH | IC ADC 18BIT 3.75SPS 1CH SOT23-6 |
| MCP3421A3T-E/CH | IC ADC 18BIT 3.75SPS 1CH SOT23-6 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1016M | 制造商:LINER 制造商全称:Linear Technology 功能描述:Ultra Fast Precision Comparator |
| LT1016MH | 制造商:LINER 制造商全称:Linear Technology 功能描述:Ultra Fast Precision Comparator |
| LT1016MJ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog Comparator |
| LT1016MJ8 | 制造商:Linear Technology 功能描述:Comparator Single ±5V/10V 8-Pin CDIP 制造商:Linear Technology 功能描述:Voltage Comparator, Single, 8 Pin, Ceramic, DIP |
| LT1016MJG | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog Comparator |
发布紧急采购，3分钟左右您将得到回复。