参数资料
| 型号： | LT1185CT#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 5/16页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO NEG ADJ 3A TO220 |
| 产品培训模块： | More Information on LDOs |
| 标准包装： | 50 |
| 稳压器拓扑结构： | 负，可调式 |
| 输出电压： | -2.5 V ~ -25 V |
| 输入电压： | -4.2 V ~ -35 V |
| 电压 - 压降（标准）： | 0.67V @ 3A |
| 稳压器数量： | 1 |
| 电流 - 输出： | 3A |
| 电流 - 限制（最小）： | 可调式 |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 通孔 |
| 封装/外壳： | TO-220-5 成形引线 |
| 供应商设备封装： | TO-220-5 |
| 包装： | 管件 |
| 产品目录页面： | 1326 (CN2011-ZH PDF) |
LT1185
APPLICATIO S I FOR ATIO
Block Diagram
A simplified block diagram of the LT1185 is shown in
Figure 1. A 2.37V bandgap reference is used to bias the
input of the error amplifier A1, and the reference amplifier
A2. A1 feeds a triple NPN pass transistor stage which has
the two driver collectors tied to ground so that the main
pass transistor can completely saturate. This topology
normally has a problem with unlimited current in Q1 and
Q2 when the input voltage is less than the minimum
required to create a regulated output. The standard “fix”
for this problem is to insert a resistor in series with Q1 and
conditions, resulting in very high supply current when the
input voltage is low. To avoid this situation, the LT1185
uses an auxiliary emitter on Q3 to create a drive limiting
feedback loop which automatically adjusts the drive to Q1
so that the base drive to Q3 is just enough to saturate Q3,
but no more. Under saturation conditions, the auxiliary
emitter is acting like a collector to shunt away the output
current of A1. When the input voltage is high enough to
keep Q3 out of saturation, the auxiliary emitter current
drops to zero even when Q3 is conducting full load current.
Q2 collectors, but this resistor must be low enough in
value to supply full base current for Q3 under worst-case
GND
V REF
R LIM (EXTERNAL)
2.37V
REF
FB
–
A1
+
A2
Q4
Q1
V OUT
D2
D4
D3
Q2
Q3
A5
A4
A3
–
+
+
–
+
–
300mV
I1
2 μ A
D1
R1
350 ?
200mV
R2
0.055 ?
V IN
LT1185 ? BD
Figure 1. Block Diagram
1185ff
5
相关PDF资料 |
PDF描述 |
|---|---|
| LT1085CT-3.3#PBF | IC REG LDO 3.3V 3A TO-220-3 |
| ADP1711AUJZ-0.9-R7 | IC REG LDO 0.9V .15A TSOT-23-5 |
| HMC15DREH-S93 | CONN EDGECARD 30POS .100 EYELET |
| GSC17DRTN-S13 | CONN EDGECARD 34POS .100 EXTEND |
| GMC17DRTN-S13 | CONN EDGECARD 34POS .100 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1185IQ | 制造商:Linear Technology 功能描述:LDO Regulator Neg/Pos -2.5V to -25V2.5V to 25V 3A 6-Pin(5+Tab) DDPAK |
| LT1185IQ#PBF | 功能描述:IC REG LDO NEG ADJ 3A 5-DD RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:8V 输入电压:10.5 V ~ 23 V 电压 - 压降（标准）:1.7V @ 40mA 稳压器数量:1 电流 - 输出:100mA（最小值） 电流 - 限制（最小）:- 工作温度:0°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:剪切带 (CT) 产品目录页面:1075 (CN2011-ZH PDF) 其它名称:296-24390-1 |
| LT1185IQ#PBF | 制造商:Linear Technology 功能描述:VOLTAGE REGULATOR LDO ADJ 3 制造商:Linear Technology 功能描述:VOLTAGE REGULATOR, LDO, ADJ, 3A, TO-263- |
| LT1185IQ#TR | 制造商:Linear Technology 功能描述:LDO Regulator Neg/Pos -2.5V to -25V2.5V to 25V 3A 6-Pin(5+Tab) DDPAK T/R |
| LT1185IQ#TRPBF | 功能描述:IC REG LDO NEG ADJ 3A 5-DD RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3V 输入电压:2.3 V ~ 5.5 V 电压 - 压降（标准）:0.035V @ 150mA 稳压器数量:2 电流 - 输出:150mA 电流 - 限制（最小）:300mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:6-UFDFN 裸露焊盘，6-TMLF? 供应商设备封装:6-TMLF?（1.6x1.6） 包装:Digi-Reel® 产品目录页面:1104 (CN2011-ZH PDF) 其它名称:576-3018-6 |
发布紧急采购，3分钟左右您将得到回复。