- 您现在的位置：买卖IC网 > PDF目录44983 > LT3430EFE-1 (LINEAR TECHNOLOGY CORP) 6.5 A SWITCHING REGULATOR, 120 kHz SWITCHING FREQ-MAX, PDSO16 PDF资料下载
参数资料
| 型号： | LT3430EFE-1 |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 稳压器 |
| 英文描述： | 6.5 A SWITCHING REGULATOR, 120 kHz SWITCHING FREQ-MAX, PDSO16 |
| 封装： | 4.40 MM, PLASTIC, TSSOP-16 |
| 文件页数： | 28/28页 |
| 文件大小： | 321K |
| 代理商： | LT3430EFE-1 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页当前第28页
LT3430/LT3430-1
9
34301fa
APPLICATIONS INFORMATION
tion should be used if resistors are increased beyond the
suggested values and short-circuit conditions occur with
high input voltage. High frequency pickup will increase
and the protection accorded by frequency and current
foldback will decrease.
Choosing the Inductor
For most applications, the output inductor will fall into
the range of 5H to 47H (10H to 100H for LT3430-1).
Lower values are chosen to reduce physical size of the
inductor. Higher values allow more output current because
they reduce peak current seen by the LT3430/LT3430-1
switch, which has a 3A limit. Higher values also reduce
output ripple voltage.
When choosing an inductor you will need to consider
output ripple voltage, maximum load current, peak induc-
tor current and fault current in the inductor. In addition,
other factors such as core and copper losses, allowable
component height, EMI, saturation and cost should also
be considered. The following procedure is suggested
as a way of handling these somewhat complicated and
conicting requirements.
Output Ripple Voltage
Figure 3 shows a comparison of output ripple voltage for
the LT3430/LT3430-1 using either a tantalum or ceramic
output capacitor. It can be seen from Figure 3 that output
ripple voltage can be signicantly reduced by using the
ceramic output capacitor; the signicant decrease in out-
put ripple voltage is due to the very low ESR of ceramic
capacitors.
Output ripple voltage is determined by ripple current (ILP-P)
through the inductor and the high frequency impedance of
the output capacitor. At high frequencies, the impedance
of the tantalum capacitor is dominated by its effective
series resistance (ESR).
Tantalum Output Capacitor
The typical method for reducing output ripple voltage
when using a tantalum output capacitor is to increase the
inductor value (to reduce the ripple current in the inductor).
The following equations will help in choosing the required
– –
+ +
1.2V
BUFFER
VSW
L1
VC
GND
TO SYNC CIRCUIT
3430 F02
TO FREQUENCY
SHIFTING
R3
1k
R4
2k
R1
C1
R2
OUTPUT
5V
ERROR
AMPLIFIER
FB
1.4V
Q1
LT3430
Q2
+
Figure 2. Frequency and Current Limit Foldback
Figure 3. LT3430 Output Ripple Voltage Waveforms.
Ceramic vs Tantalum Output Capacitors
VIN = 40V
VOUT = 5V
L = 22
H
3430 F03
2
s/DIV
20mV/DIV
VOUT USING
100
F CERAMIC
OUTPUT
CAPACITOR
VOUT USING
100
F 0.08
TANTALUM
OUTPUT
CAPACITOR
20mV/DIV
相关PDF资料 |
PDF描述 |
|---|---|
| LT3467AIDDB#PBF | 2.5 A SWITCHING REGULATOR, 2700 kHz SWITCHING FREQ-MAX, PDSO8 |
| LT3467AIDDB | 2.5 A SWITCHING REGULATOR, 2700 kHz SWITCHING FREQ-MAX, PDSO8 |
| LT3467IS6#TRM | 2.5 A SWITCHING REGULATOR, 1600 kHz SWITCHING FREQ-MAX, PDSO6 |
| LT3467IS6#TR | 2.5 A SWITCHING REGULATOR, 1600 kHz SWITCHING FREQ-MAX, PDSO6 |
| LT3467AIDDB#TRM | 2.5 A SWITCHING REGULATOR, 2700 kHz SWITCHING FREQ-MAX, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT3430EFE-1#PBF | 功能描述:IC REG BUCK ADJ 3A 16TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON（1.45x1） 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2 |
| LT3430EFE-1#TRPBF | 功能描述:IC REG BUCK ADJ 3A 16TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LT3430EFEPBF | 制造商:Linear Technology 功能描述:LT3430 adj 3A Buck SD dc-dc converter |
| LT3430IFE | 功能描述:IC REG BUCK ADJ 3A 16TSSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LT3430IFE#PBF | 功能描述:IC REG BUCK ADJ 3A 16TSSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
发布紧急采购，3分钟左右您将得到回复。