- 您现在的位置：买卖IC网 > PDF目录44984 > LT3509IMSE#TRPBF (LINEAR TECHNOLOGY CORP) 1.2 A DUAL SWITCHING CONTROLLER, 2500 kHz SWITCHING FREQ-MAX, PDSO16 PDF资料下载
参数资料
| 型号： | LT3509IMSE#TRPBF |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 稳压器 |
| 英文描述： | 1.2 A DUAL SWITCHING CONTROLLER, 2500 kHz SWITCHING FREQ-MAX, PDSO16 |
| 封装： | LEAD FREE, PLASTIC, MSOP-16 |
| 文件页数： | 6/24页 |
| 文件大小： | 271K |
| 代理商： | LT3509IMSE#TRPBF |
LT3509
14
3509fc
When the switch is off, the potential across the inductor is
the output voltage plus the catch diode forward voltage. This
gives the peak-to-peak ripple current in the inductor:
ΔIL =(1– DC)
V
OUT + VF
Lf
SW
where:
DC = Duty Cycle
fSW = Switching Frequency
L = Inductor Value
VF = Diode Forward Voltage
The peak inductor and switch current is:
I
SWPK =ILPK =IOUT +
ΔIL
2
To maintain output regulation, this peak current must be
less than the LT3509’s switch current limit ILIM. This is
dependent on duty cycle due to the slope compensation.
For ILIM is at least 1.4A at low duty cycles and decreases
linearly to 1.0A at DC = 0.8.
The theoretical minimum inductance can now be calcu-
lated as:
L
DC
f
VV
II
MIN
OUT
F
LIM
OUT
=
+
1–
–
where DCMIN is the minimum duty cycle called for by the
application i.e.:
DC
VV
V
MIN
OUT MAX
F
IN MIN
SW
F
=
+
()
() –
There is a limit to the actual minimum duty cycle imposed
by the minimum on-time of the switch. For a robust design
it is important that inductor that will not saturate when
the switch is at its minimum on-time, the input voltage
is at maximum and the output is short circuited. In this
case the full input voltage, less the drop in the switch, will
appear across the inductor. This doesn’t require an actual
short, just starting into a capacitive load will provide the
same conditions. The Diode current sensing scheme will
ensure that the switch will not turn-on if the inductor
current is above the DA current limit threshold, which has
a maximum of 1.1A. The peak current under short-circuit
conditions can then be calculated from:
I
Vt
L
A
PEAK
IN
ON MIN
=+
.
()
11
The inductor should have a saturation current greater than
this value. For safe operation with high input voltages this
can often mean using a physically larger inductor as higher
value inductors often have lower saturation currents for
a given core size. As a general rule the saturation current
should be at least 1.8A to be short-circuit proof. However, it’s
generally better to use an inductor larger than the minimum
value. For robust operation at input voltages greater than
30V, use an inductor with a value of 4.2μH or greater, and
a saturation current rating of 1.8A or higher. The minimum
inductor has large ripple currents which increase core
losses and require large output capacitors to keep output
voltage ripple low. Select an inductor greater than LMIN
that keeps the ripple current below 30% of ILIM.
APPLICATIONS INFORMATION
相关PDF资料 |
PDF描述 |
|---|---|
| LT3509EMSE#TRPBF | 1.2 A DUAL SWITCHING CONTROLLER, 2500 kHz SWITCHING FREQ-MAX, PDSO16 |
| LT3509IDE#TRPBF | 1.2 A DUAL SWITCHING CONTROLLER, 2500 kHz SWITCHING FREQ-MAX, PDSO14 |
| LT3509IDE#PBF | 1.2 A DUAL SWITCHING CONTROLLER, 2500 kHz SWITCHING FREQ-MAX, PDSO14 |
| LT3509EDE#PBF | 1.2 A DUAL SWITCHING CONTROLLER, 2500 kHz SWITCHING FREQ-MAX, PDSO14 |
| LT3509EDE#TRPBF | 1.2 A DUAL SWITCHING CONTROLLER, 2500 kHz SWITCHING FREQ-MAX, PDSO14 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT350A | 功能描述:气体放电管 - GDT /气体等离子体避雷器 350V RoHS:否 制造商:Bourns 峰值脉冲电流: 直流击穿电压（标称）:4500 V 电极数量:2 系列:SA2 端接类型:Axial 故障安全保护 Y/N: 封装:Reel |
| LT350A-B | 功能描述:气体放电管 - GDT /气体等离子体避雷器 350V RoHS:否 制造商:Bourns 峰值脉冲电流: 直流击穿电压（标称）:4500 V 电极数量:2 系列:SA2 端接类型:Axial 故障安全保护 Y/N: 封装:Reel |
| LT350AK | 制造商:Linear Technology 功能描述:Standard Regulator Pos 3A 3-Pin(2+Tab) TO-3 |
| LT350AT | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Positive Adjustable Voltage Regulator |
| LT350C | 功能描述:气体放电管 - GDT /气体等离子体避雷器 350V RoHS:否 制造商:Bourns 峰值脉冲电流: 直流击穿电压（标称）:4500 V 电极数量:2 系列:SA2 端接类型:Axial 故障安全保护 Y/N: 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。