- 您现在的位置：买卖IC网 > PDF目录13908 > LT3640IUFD#PBF (Linear Technology)IC REG BUCK FIX/ADJ DL 28QFN PDF资料下载
参数资料
| 型号： | LT3640IUFD#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 14/24页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK FIX/ADJ DL 28QFN |
| 标准包装： | 73 |
| 类型： | 降压（降压） |
| 输出类型： | 两者兼有 |
| 输出数： | 2 |
| 输出电压： | 1.8V，3.3V，可调 |
| 输入电压： | 2.5 V ~ 35 V |
| PWM 型： | 电流模式，混合 |
| 频率 - 开关： | 500kHz ~ 2MHz |
| 电流 - 输出： | 1.1A，1.3A |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-WFQFN 裸露焊盘 |
| 包装： | 管件 |
| 供应商设备封装： | 28-QFN（4x5） |
LT3640
APPLICATIONS INFORMATION
V OUT 2
f S
? ? 1 – OUT 2 ?
? I L 2 =
C IN ≥
Toguaranteesufficientoutputcurrent,peakinductorcur-
rent must be lower than the switch current limit (I LIM ).
The largest inductor current ripple occurs at the highest
V IN . To guarantee current capacity, use V IN(MAX) in the
above formula.
The inductance for the low voltage channel is:
L 2 = 1 . 5
For a selected inductance, the inductor current ripple can
be calculated:
V OUT 2 ? V ?
L 2 ? f S ? V IN 2 ?
For robust operation in fault conditions, the inductor
saturation current should be higher than the upper limit
of the corresponding top switch current limit.
To keep the efficiency high, the inductor series resistance
(DCR) should be as small as possible (must be < 0.1Ω),
and the core material should be intended for the chosen
operation frequency. High efficiency converters generally
cannot afford the core loss found in low cost powdered
iron cores; instead use ferrite, molypermalloy or Kool Mμ
cores. Table 2 lists several vendors and suitable inductor
series.
Table 2. Inductor Vendors
PART SERIES VENDOR
Of course, such a simple design guide will not always
result in the optimum inductors for the applications. A
larger value inductor provides a slightly higher maximum
load current and will reduce the output voltage ripple. A
larger value inductor also results in higher efficiency in the
condition of same DCR and same magnetic loss. However,
for a same series of inductors, a larger value inductor has
higher DCR. The trade-off between inductance and DCR
is not always obvious. Use experiments to find optimum
inductors.
Low inductance may result in discontinuous mode opera-
tion, which is okay, but reduces maximum load current.
For details of maximum output current and discontinuous
mode operation, see the Linear Technology Application Note
44. For duty cycles greater than 50%, there is a minimum
inductance required to avoid subharmonic oscillations.
See the Linear Technology Application Note 19.
Input Capacitor
Bypass the V IN pin of the LT3640 with a ceramic capacitor
of X7R (–55°C to 125°C) or X5R (–55°C to 85°C) type.
Buck converters draw pulse current from the input sup-
ply. The input capacitor is required to reduce the resulting
voltage ripple. Use a ceramic capacitor with:
10μF
f S
where f S in the switching frequency in MHz.
LQH55D
SLF7045
SLF10145
D62CB, D63CB
D75C, D75F
CR54, CDRH74
CDRH6D38, CR75
Murata
www.murata.com
TDK
www.componenttdk.com
TOKO
www.toko.com
Sumida
www.sumida.com
A second precaution regarding the ceramic input capacitor
concerns the maximum input voltage rating of the LT3640.
A ceramic input capacitor combined with trace or cable
inductance forms a under damped tank circuit. If the LT3640
circuit is plugged into a live supply, the input voltage can
ring to twice its nominal value, possibly exceeding the
LT3640’s voltage rating. This situation can be easily avoided
(see the Linear Technology Application Note 80).
3640f
相关PDF资料 |
PDF描述 |
|---|---|
| MAX6720AUTVHD2+T | IC SUPERVISOR MPU SOT23-6 |
| LTC3413EFE#TRPBF | IC REG BUCK SYNC ADJ 3A 16TSSOP |
| LTC3413EFE#TR | IC REG BUCK SYNC ADJ 3A 16TSSOP |
| LT1374CS8-5SYNC#PBF | IC REG BUCK 5V 4.5A 8SOIC |
| EBM18DRMN-S273 | CONN EDGECARD 36POS .156 WW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT3640IUFDTRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Monolithic Buck Regulator with Power-On Reset and Watchdog Timer |
| LT3641EFE#PBF | 功能描述:IC REG BUCK SYNC ADJ DL 28-TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON（1.45x1） 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2 |
| LT3641EFE#TRPBF | 功能描述:IC REG BUCK SYNC ADJ DL 28TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LT3641EUFD#PBF | 功能描述:IC REG BUCK SYNC ADJ DL 28QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LT3641EUFD#TRPBF | 功能描述:IC REG BUCK SYNC ADJ DL 28QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
发布紧急采购，3分钟左右您将得到回复。