参数资料
| 型号： | LTC1051CN8 |
| 厂商： | Linear Technology |
| 文件页数： | 16/16页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP CHOPR-STBL DUAL 8-DIP |
| 标准包装： | 50 |
| 放大器类型： | 断路器（零漂移） |
| 电路数： | 2 |
| 转换速率： | 4 V/µs |
| 增益带宽积： | 2.5MHz |
| 电流 - 输入偏压： | 15pA |
| 电压 - 输入偏移： | 0.5µV |
| 电流 - 电源： | 1mA |
| 电压 - 电源，单路/双路(±)： | 4.75 V ~ 16 V，±2.38 V ~ 8 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 8-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 8-PDIP |
| 包装： | 管件 |
9
LTC1051/LTC1053
10513fa
2. If we arbitrarily accept that “aliasing” occurs when
output alias signals reach an amplitude of 0.01% or more
of the output signal, then: the approximate minimum
frequency of an AC input signal which will cause aliasing
is equal to the internal clock frequency multiplied by the
square root of the op amp feedback factor. For instance,
with closed-loop gain of –10, the feedback factor is 1/11
and if fCLK = 2.6kHz, alias signals can be detected when
the frequency of the input signal exceeds 750Hz to 800Hz
(Figure 5a).
3. The number of alias signals increases when the input
signal frequency increases (Figure 5b).
4. When the frequency, fIN, of the input signal is less than
fCLOCK, the alias signal(s) amplitude(s) directly scale with
the amplitude of the incoming signal. The output “signal to
alias ratio” cannot be increased by just boosting the input
signal amplitude. However, when the input AC signal
frequency well exceeds the clock frequency, the amplitude
of the alias signals does not directly scale with the input
amplitude. The “signal to alias ratio” increases when the
output swings closely to the rails. (See Figure 5b and
Figure 7.) It is important to note that the LTC1051/
LTC1053 op amps, under light loads (RL ≥ 10k), swing
closely to the supply rails without generating harmonic
distortion (Figure 8).
B: MAG
RANGE: 9dBV
STATUS: PAUSED
RMS: 25
13dBV
15dB
/DIV
–107
CENTER: 2 625Hz
X: 2535Hz
BW: 19.097Hz
Y: – 74.16dBV
SPAN: 2 000Hz
fIN = 2.685kHz
fCLK
2fCLK – fIN
83.5dB
–
+
1/2
LTC1051
1051/53 F05a
10k
0.1F
50pF
5V
–5V
NOTE: THE fCLK – fIN = 85Hz
ALIAS FREQUENCY IS 95dB
DOWN FROM THE OUTPUT LEVEL
VIN = 10kHz
8VP-P
Figure 6b. Output Voltage Spectrum of 1/2 LTC1051 Operating as a Unity-Gain Inverting Amplifier.
VS = ±5V, RL = 10k, CL = 50pF, VIN = 8VP-P, 10kHz
Figure 6a. Output Voltage Spectrum of 1/2 LTC1051 Operating as a Unity-Gain Inverting Amplifier.
VS = ±5V, RL = 10k, CL = 50pF, VIN = 8VP-P, 2.685kHz
B: MAG
RANGE: 9dBV
STATUS: PAUSED
RMS: 50
13dBV
15dB
/DIV
–107
CENTER: 10 000Hz
X: 10000Hz
BW: 95.485Hz
Y: 7.98dBV
SPAN: 10 000Hz
fIN = 10kHz
fIN – fCLK
2 fCLK
6fCLK – fIN
80dB
15dB
1kHz
5fCLK – fIN
fIN – 2fCLK
NOTE: ALL ALIAS FREQUENCY
80dB TO 84dB DOWN FROM OUTPUT
APPLICATIO S I FOR ATIO
WU
UU
相关PDF资料 |
PDF描述 |
|---|---|
| AD5750-1BCPZ-REEL7 | IC CURR/VOLT OUT DVR 32LFCSP |
| AD5750BCPZ-REEL7 | IC CURR/VOLT OUT DVR 32LFCSP |
| 9-146309-0-39 | CONN HEADR BRKWAY .100 78POS R/A |
| 2035-35-A | GAS DISCHARGE TUBE MINI 2 POLE |
| 2035-30-SM | GAS DISCHARGE TUBE MINI 2 POLE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1051CN8#PBF | 功能描述:IC OPAMP CHOPR-STBL DUAL 8-DIP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:4 输出类型:- 转换速率:0.6 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:45nA 电压 - 输入偏移:2000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:40mA 电压 - 电源，单路/双路(±):3 V ~ 32 V，±1.5 V ~ 16 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) 其它名称:LM324ADTBR2G-NDLM324ADTBR2GOSTR |
| LTC1051CN8PBF | 制造商:Linear Technology 功能描述:Dual precision op amp,LTC1051CN8 DIP8 |
| LTC1051CS | 制造商:Linear Technology 功能描述:IC OP AMP DUAL CMOS 1051 SOIC16 |
| LTC1051CS#PBF | 制造商:Linear Technology 功能描述:OP AMP DUAL CMOS 1051 NSOIC16 |
| LTC1051CSW | 功能描述:IC OPAMP CHOPR-STBL DUAL 16SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:50 系列:- 放大器类型:J-FET 电路数:2 输出类型:- 转换速率:13 V/µs 增益带宽积:3MHz -3db带宽:- 电流 - 输入偏压:65pA 电压 - 输入偏移:3000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):7 V ~ 36 V，±3.5 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-PDIP 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。