- 您现在的位置：买卖IC网 > PDF目录10679 > LTC1407IMSE-1#PBF (Linear Technology)IC ADC 12BIT 3MSPS 10-MSOP PDF资料下载
参数资料
| 型号： | LTC1407IMSE-1#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 7/26页 |
| 文件大小： | 0K |
| 描述： | IC ADC 12BIT 3MSPS 10-MSOP |
| 标准包装： | 50 |
| 位数： | 12 |
| 采样率（每秒）： | 3M |
| 数据接口： | 串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 14mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 |
| 供应商设备封装： | 10-MSOP 裸露焊盘 |
| 包装： | 管件 |
| 输入数目和类型： | 4 个单端，单极；2 个差分，单极 |
| 产品目录页面： | 1346 (CN2011-ZH PDF) |
| 配用： | DC1082A-B-ND - BOARD SAR ADC LTC1407A DC1082A-A-ND - BOARD SAR ADC LTC1407A-1 |
LTC1407-1/LTC1407A-1
15
14071fb
APPLICATIONS INFORMATION
INTERNAL REFERENCE
The LTC1407-1/LTC1407A-1 have an on-chip, temperature
compensated, bandgap reference that is factory trimmed
near 2.5V to obtain a precise ±1.25V input span. The ref-
erence amplier output VREF, (Pin 3) must be bypassed
with a capacitor to ground. The reference amplifier is
stable with capacitors of 1μF or greater. For the best noise
performance, a 10μF ceramic or a 10μF tantalum in paral-
lel with a 0.1μF ceramic is recommended. The VREF pin
can be overdriven with an external reference as shown
in Figure 3. The voltage of the external reference must be
higher than the 2.5V of the open-drain P-channel output
of the internal reference. The recommended range for an
external reference is 2.55V to VDD. An external reference
at 2.55V will see a DC quiescent load of 0.75mA and as
much as 3mA during conversion.
errors (DNL) are largely independent of the common
mode voltage. However, the offset error will vary. CMRR
is typically better than 60dB.
Figure 5 shows the ideal input/output characteristics for
the LTC1407-1/LTC1407A-1. The code transitions occur
midway between successive integer LSB values (i.e.,
0.5LSB, 1.5LSB, 2.5LSB, FS – 1.5LSB). The output code
is 2’s complement with 1LSB = 2.5V/16384 = 153μV for
the LTC1407A-1 and 1LSB = 2.5V/4096 = 610μV for the
LTC1407-1. The LTC1407A-1 has 1LSB RMS of Gaussian
white noise. Figure 6a shows the LTC1819 converting a
single-ended input signal to differential input signals for
optimum THD and SFDR performance as shown in the
FFT plot (Figure 6b).
Figure 4. CMRR vs Frequency
Figure 3
INPUT SPAN VERSUS REFERENCE VOLTAGE
The differential input range has a unipolar voltage span that
equals the difference between the voltage at the reference
buffer output VREF (Pin 3) and the voltage at the Exposed
Pad ground. The differential input range of ADC is –1.25V
to 1.25V when using the internal reference. The internal
ADC is referenced to these two nodes. This relationship
also holds true with an external reference.
DIFFERENTIAL INPUTS
The ADC will always convert the bipolar difference of CH0+
minus CH0– or the bipolar difference of CH1+ minus CH1–,
independent of the common mode voltage at either set
of inputs. The common mode rejection holds up at high
frequencies (see Figure 4). The only requirement is that
both inputs not go below ground or exceed VDD. Integral
nonlinearity errors (INL) and differential nonlinearity
LTC1407-1/
LTC1407A-1
VREF
GND
14071 F02
3
11
10μF
3V REF
Figure 5. LTC1407-1/LTC1407A-1 Transfer Characteristic
FREQUENCY (Hz)
–80
CMRR
(dB)
–40
0
–100
–60
–20
100
1k
14071 F04
–120
10k
100k
1M
10M
100M
CH0
CH1
INPUT VOLTAGE (V)
2’
sCOMPLEMENT
OUTPUT
CODE
14071 F05
011...111
011...110
011...101
100...000
100...001
100...010
FS – 1LSB
–FS
相关PDF资料 |
PDF描述 |
|---|---|
| LT6700MPDCB-1#TRMPBF | IC COMP DUAL 400MV REF 6-DFN |
| VE-JWK-MY-F1 | CONVERTER MOD DC/DC 40V 50W |
| VI-B2K-MY-B1 | CONVERTER MOD DC/DC 40V 50W |
| VE-JWH-MY-F4 | CONVERTER MOD DC/DC 52V 50W |
| VI-J2Y-MY-F1 | CONVERTER MOD DC/DC 3.3V 33W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1408CUH | 功能描述:IC ADC 14BIT 600KSPS 32-QFN RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| LTC1408CUH#PBF | 功能描述:IC ADC 14BIT 600KSPS 32-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率（每秒）:1M 数据接口:串行，SPI? 转换器数目:1 功率耗散（最大）:- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘（4x4） 包装:Digi-Reel® 输入数目和类型:8 个单端，单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6 |
| LTC1408CUH#TRPBF | 功能描述:IC ADC 14BIT 600KSPS 32-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| LTC1408CUH-12 | 制造商:Linear Technology 功能描述:ADC Single 600ksps 12-bit Serial 32-Pin QFN EP |
| LTC1408CUH-12#PBF | 功能描述:IC ADC 12BIT 600KSPS 32-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
发布紧急采购，3分钟左右您将得到回复。