- 您现在的位置：买卖IC网 > PDF目录13117 > LTC1844ES5-2.8#TRMPBF (Linear Technology)IC REG LDO 2.8V .15A TSOT23-5 PDF资料下载
参数资料
| 型号： | LTC1844ES5-2.8#TRMPBF |
| 厂商： | Linear Technology |
| 文件页数： | 10/12页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 2.8V .15A TSOT23-5 |
| 产品培训模块： | More Information on LDOs |
| 标准包装： | 1 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 2.8V |
| 输入电压： | 最高 6.5V |
| 电压 - 压降（标准）： | 0.105V @ 150mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 150mA（最小值） |
| 电流 - 限制（最小）： | 160mA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-5 细型，TSOT-23-5 |
| 供应商设备封装： | TSOT-23-5 |
| 包装： | 剪切带 (CT) |
| 其它名称： | LTC1844ES5-2.8#TRMPBFCT |
LTC1844 Series
APPLICATIO N S I N FOR M ATIO N
Thermal Considerations
The power handling capability of the device will be limited
by the maximum rated junction temperature (125 ° C). The
power dissipated by the device will be the output current
multiplied by the input/output voltage differential:
(I OUT )(V IN – V OUT ).
The LTC1844 series regulators have internal thermal lim-
iting designed to protect the device during momentary
overload conditions. For continuous normal conditions,
the maximum junction temperature rating of 125 ° C must
not be exceeded. It is important to give careful consider-
ation to all sources of thermal resistance from junction to
ambient. Additional heat sources mounted nearby must
also be considered.
For surface mount devices, heat sinking is accomplished
by using the heat-spreading capabilities of the PC board
and its copper traces. Copper board stiffeners and plated
through holes can also be used to spread the heat gener-
ated by power devices.
Table 1 lists thermal resistance for several different board
sizes and copper areas. All measurements were taken in
still air on 3/32" FR-4 board with one ounce copper.
Table 1. Measured Thermal Resistance
The power dissipated by the device will be equal to:
I OUT(MAX) (V IN(MAX) – V OUT )
where:
I OUT(MAX) = 50mA
V IN(MAX) = 6V
So:
P = 50mA(6V – 3.3V) = 0.135W
The power dissipated by the LTC1844’s quiescent current
(240 μ W) is insignificant. The thermal resistance will be in
the range of 125 ° C/W to 150 ° C/W depending on the
copper area. The junction temperature rise above ambient
will be approximately equal to:
0.135W(150 ° C/W) = 20.3 ° C
The maximum junction temperature will then be equal to
the maximum junction temperature rise above ambient
plus the maximum ambient temperature or:
T = 50 ° C + 20.3 ° C = 70.3 ° C
Protection Features
The LTC1844 regulators incorporate several protection
features which make them ideal for use in battery-powered
COPPER AREA
THERMAL RESISTANCE
circuits. In addition to the usual protection features asso-
TOPSIDE* BACKSIDE
BOARD AREA
(JUNCTION-TO-AMBIENT)
ciated with monolithic regulators, such as current limiting
2500mm 2
2500mm 2
2500mm 2
125 ° C/W
and thermal limiting, the devices are protected against
1000mm
2
2500mm
2
2500mm 2
125 ° C/W
reverse input voltages and reverse voltages from output to
2500mm
225mm
2
2500mm
2
2
130 ° C/W
input.
100mm
2500mm
2500mm
2
50mm 2
2
2500mm 2
2
2500mm 2
135 ° C/W
150 ° C/W
Current limit protection and thermal overload protection
are intended to protect the device against current overload
*Device is mounted on topside.
Calculating Junction Temperature
Example: Given an output voltage of 3.3V, an input voltage
of 4V to 6V, an output current range of 0mA to 50mA and
a maximum ambient temperature of 50 ° C, what will the
maximum junction temperature be?
conditions at the output of the device. For normal opera-
tion, the junction temperature should not exceed 125 ° C.
The input of the device will withstand input voltages of
– 7V. Current flow into the device will be limited to less
than 500 μ A (typically less than 200 μ A) and only a small
negative voltage will appear at the output (~ –300mV with
no load). The LTC1844 will protect both itself and the load
against batteries plugged in backward. The shutdown pin
will require current limiting if used (see Pin Functions).
1844fa
10
相关PDF资料 |
PDF描述 |
|---|---|
| GCM25DTMS-S189 | CONN EDGECARD 50POS R/A .156 SLD |
| RCA44DRMD-S288 | CONN EDGECARD 88POS .125 EXTEND |
| RCC30DREF-S734 | CONN EDGECARD 60POS .100 EYELET |
| 200VXR390MEFCSN30X25 | CAP ALUM 390UF 200V 20% SNAP-IN |
| VE-J12-CZ-B1 | CONVERTER MOD DC/DC 15V 25W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1844ES5-3.3#PBF | 制造商:Linear Technology 功能描述:LDO Regulator Pos 3.3V 0.15A 5-Pin TSOT-23 制造商:Linear Technology 功能描述:DP-LINREG, CUT TAPE 3.3V, Micropower, Low Noise VLDO Regulator |
| LTC1844ES5-3.3#TR | 功能描述:IC REG LDO 3.3V .15A TSOT23-5 RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:2.5 V ~ 5.5 V 电压 - 压降（标准）:0.1V @ 200mA 稳压器数量:2 电流 - 输出:300mA 电流 - 限制（最小）:350mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-UFQFN 供应商设备封装:8-MLPQ-UT（1.5x1.5） 包装:剪切带 (CT) 产品目录页面:1358 (CN2011-ZH PDF) 其它名称:SC560HULCT |
| LTC1844ES5-3.3#TRM | 功能描述:IC REG LDO 3.3V .15A TSOT23-5 RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:2.5 V ~ 5.5 V 电压 - 压降（标准）:0.1V @ 200mA 稳压器数量:2 电流 - 输出:300mA 电流 - 限制（最小）:350mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-UFQFN 供应商设备封装:8-MLPQ-UT（1.5x1.5） 包装:剪切带 (CT) 产品目录页面:1358 (CN2011-ZH PDF) 其它名称:SC560HULCT |
| LTC1844ES5-3.3#TRMPBF | 功能描述:IC REG LDO 3.3V .15A TSOT23-5 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 产品培训模块:MIC5365/66 Ultra-small LDO Regulators 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3V 输入电压:最高 5.5V 电压 - 压降（标准）:0.155V @ 150mA 稳压器数量:1 电流 - 输出:150mA 电流 - 限制（最小）:200mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:4-UDFN 裸露焊盘，4-TMLF? 供应商设备封装:4-TMLF?（1x1） 包装:Digi-Reel® 其它名称:576-3192-6 |
| LTC1844ES5-3.3#TRPBF | 功能描述:IC REG LDO 3.3V .15A TSOT23-5 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:2.5 V ~ 5.5 V 电压 - 压降（标准）:0.1V @ 200mA 稳压器数量:2 电流 - 输出:300mA 电流 - 限制（最小）:350mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-UFQFN 供应商设备封装:8-MLPQ-UT（1.5x1.5） 包装:剪切带 (CT) 产品目录页面:1358 (CN2011-ZH PDF) 其它名称:SC560HULCT |
发布紧急采购，3分钟左右您将得到回复。