参数资料
型号: LTC2224IUK#TRPBF
厂商: Linear Technology
文件页数: 4/24页
文件大小: 0K
描述: IC ADC 12BIT 135MSPS SAMPL 48QFN
标准包装: 2,000
位数: 12
采样率(每秒): 135M
数据接口: 并联
转换器数目: 1
功率耗散(最大): 680mW
电压电源: 单电源
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 48-WFQFN 裸露焊盘
供应商设备封装: 48-QFN-EP(7x7)
包装: 带卷 (TR)
输入数目和类型: 1 个单端,双极; 1 个差分,双极
LTC2224
12
2224fa
APPLICATIO S I FOR ATIO
WU
U
DYNAMIC PERFORMANCE
Signal-to-Noise Plus Distortion Ratio
The signal-to-noise plus distortion ratio [S/(N + D)] is the
ratio between the RMS amplitude of the fundamental input
frequency and the RMS amplitude of all other frequency
components at the ADC output. The output is band limited
to frequencies above DC to below half the sampling
frequency.
Signal-to-Noise Ratio
The signal-to-noise ratio (SNR) is the ratio between the
RMS amplitude of the fundamental input frequency and
the RMS amplitude of all other frequency components
except the first five harmonics and DC.
Total Harmonic Distortion
Total harmonic distortion is the ratio of the RMS sum of all
harmonics of the input signal to the fundamental itself. The
out-of-band harmonics alias into the frequency band
between DC and half the sampling frequency. THD is
expressed as:
THD = 20Log (
√(V22 + V32 + V42 + . . . Vn2)/V1)
where V1 is the RMS amplitude of the fundamental fre-
quency and V2 through Vn are the amplitudes of the
second through nth harmonics. The THD calculated in this
data sheet uses all the harmonics up to the fifth.
Intermodulation Distortion
If the ADC input signal consists of more than one spectral
component, the ADC transfer function nonlinearity can
produce intermodulation distortion (IMD) in addition to
THD. IMD is the change in one sinusoidal input caused by
the presence of another sinusoidal input at a different
frequency.
If two pure sine waves of frequencies fa and fb are applied
to the ADC input, nonlinearities in the ADC transfer func-
tion can create distortion products at the sum and differ-
ence frequencies of mfa
± nfb, where m and n = 0, 1, 2, 3,
etc. The 3rd order intermodulation products are 2fa + fb,
2fb + fa, 2fa – fb and 2fb – fa. The intermodulation
distortion is defined as the ratio of the RMS value of either
input tone to the RMS value of the largest 3rd order
intermodulation product.
Spurious Free Dynamic Range (SFDR)
Spurious free dynamic range is the peak harmonic or
spurious noise that is the largest spectral component
excluding the input signal and DC. This value is expressed
in decibels relative to the RMS value of a full scale input
signal.
Full Power Bandwidth
The full power bandwidth is that input frequency at which
the amplitude of the reconstructed fundamental is re-
duced by 3dB for a full scale input signal.
Aperture Delay Time
The time from when a rising ENC+ equals the ENCvoltage
to the instant that the input signal is held by the sample and
hold circuit.
Aperture Delay Jitter
The variation in the aperture delay time from conversion to
conversion. This random variation will result in noise
when sampling an AC input. The signal to noise ratio due
to the jitter alone will be:
SNRJITTER = –20log (2π fIN tJITTER)
相关PDF资料
PDF描述
LTC2225IUH#TRPBF IC ADC 12BIT 10MSPS 3V 32-QFN
LTC2228IUH#TRPBF IC ADC 12BIT 65MSPS SAMPL 32-QFN
LTC2229IUH#PBF IC ADC 12-BIT 80MSPS 3V 32-QFN
LTC2231IUP#TRPBF IC ADC 10BIT 135MSPS 64-QFN
LTC2233CUK#TRPBF IC ADC 10BIT 80MSPS SAMPL 48QFN
相关代理商/技术参数
参数描述
LTC2224UK 制造商:LINER 制造商全称:Linear Technology 功能描述:12-Bit, 135Msps ADC
LTC2225 制造商:LINER 制造商全称:Linear Technology 功能描述:14-Bit, 80Msps Low Power 3V ADC
LTC2225CUH 制造商:Linear Technology 功能描述:ADC Single Pipelined 10Msps 12-bit Parallel 32-Pin QFN EP
LTC2225CUH#PBF 功能描述:IC ADC 12-BIT 10MSPS 3V 32-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率(每秒):1M 数据接口:串行,SPI? 转换器数目:1 功率耗散(最大):- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘(4x4) 包装:Digi-Reel® 输入数目和类型:8 个单端,单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6
LTC2225CUH#TR 制造商:Linear Technology 功能描述:ADC Single Pipelined 10Msps 12-bit Parallel 32-Pin QFN EP T/R