- 您现在的位置：买卖IC网 > PDF目录8607 > LTC2751AIUHF-16#TRPBF (Linear Technology)IC DAC 16BIT CUR OUT 38-QFN PDF资料下载
参数资料
| 型号： | LTC2751AIUHF-16#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 22/22页 |
| 文件大小： | 0K |
| 描述： | IC DAC 16BIT CUR OUT 38-QFN |
| 产品培训模块： | LTC275x 18-Bit DAC |
| 标准包装： | 2,500 |
| 系列： | SoftSpan™ |
| 设置时间： | 2µs |
| 位数： | 16 |
| 数据接口： | 并联 |
| 转换器数目： | 1 |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 38-WFQFN 裸露焊盘 |
| 供应商设备封装： | 38-QFN（5x7） |
| 包装： | 带卷 (TR) |
| 输出数目和类型： | 2 电流，单极；2 电流，双极 |
| 采样率（每秒）： | * |
| 配用： | DC1110A-ND - BOARD DAC LTC2751-16 |
LTC2751
9
2751fa
pin FuncTions
RCOM (Pin 1): Center Tap Point of RIN and REF. Normally
tied to the negative input of the external reference invert-
ing amplifier.
RIN(Pin2):InputResistorforExternalReferenceInverting
Amplifier. Normally tied to the external reference voltage
VREFandtoROFS(Pin37).Typically5V;acceptsupto±15V.
S2 (Pin 3): Span I/O Bit 2. Pins S0, S1 and S2 are used
to program and to read back the output range of the DAC.
IOUT2 (Pin 4): DAC Current Output Complement. Tie IOUT2
to GND.
NC (Pin 5): No Connection. Must be tied to GND, provides
necessary shielding for IOUT2.
D3-D11(Pins6-14):LTC2751-12 Only.DACInput/Output
Data Bits. These I/O pins set and read back the DAC code.
D11 is the MSB.
D5-D13(Pins6-14):LTC2751-14 Only.DACInput/Output
Data Bits. These I/O pins set and read back the DAC code.
D13 is the MSB.
D7-D15(Pins6-14):LTC2751-16 Only.DACInput/Output
Data Bits. These I/O pins set and read back the DAC code.
D15 is the MSB.
VDD (Pin 15): Positive Supply Input 2.7V ≤ VDD ≤ 5.5V.
Requires a 0.1F bypass capacitor to GND.
GND (Pin 16): Ground. Tie to ground.
CLR (Pin 17): Asynchronous Clear. When CLR is taken
to a logic low, the data registers are reset to the zero-volt
code for the present output range (VOUT = 0V).
MSPAN(Pin18):ManualSpanControlPin.MSPANisused
to configure the LTC2751 for operation in a single, fixed
output range. When configured for single-span operation,
the output range is set via hardware pin strapping. The
span input and DAC registers are transparent and do not
respond to write or update commands.
To configure the part for single-span use, tie MSPAN
directly to VDD. If MSPAN is instead connected to GND
(SoftSpan configuration), the output ranges are set and
verified by using write, update and read operations. See
Manual Span Configuration in the Operation section.
MSPAN must be connected either directly to GND (Soft-
Span configuration) or VDD (single-span configuration).
D0-D2(Pins19-21):LTC2751-12 Only.DACInput/Output
Data Bits. These I/O pins set and read back the DAC code.
D0 is the LSB.
D0-D4(Pins19-23):LTC2751-14 Only.DACInput/Output
Data Bits. These I/O pins set and read back the DAC code.
D0 is the LSB.
D0-D6(Pins19-25):LTC2751-16 Only.DACInput/Output
Data Bits. These I/O pins set and read back the DAC code.
D0 is the LSB.
NC (Pins 22-27): LTC2751-12 Only. No Connection.
NC (Pins 24-27): LTC2751-14 Only. No Connection.
NC (Pins 26, 27): LTC2751-16 Only. No Connection.
D/S (Pin 28): Data/Span Select. This pin is used to select
activation of the data or span I/O pins (D0 to D15 or S0
to S2, respectively), along with their respective dedicated
registers, for write or read operations. Update operations
ignore D/S, since all updates affect both data and span
registers. For single-span operation, tie D/S to GND.
READ(Pin29):ReadPin.WhenREADisassertedhigh,the
data I/O pins (D0-D15) or span I/O pins (S0-S2) output the
contents of the selected register (see Table 1). For single-
span operation, readback of the span I/O pins is disabled.
UPD (Pin 30): Update and Buffer Select Pin. When READ
is held low and UPD is asserted high, the contents of the
input registers (both data and span) are copied into their
respectiveDACregisters.TheoutputoftheDACisupdated,
reflecting the new DAC register values.
When READ is held high, the update function is disabled
and the UPD pin functions as a buffer selector—logic low
to select the input register, high for the DAC register. See
Readback in the Operation section.
WR (Pin 31): Active Low Write Pin. A Write operation
copies the data present on the data or span I/O pins (D0-
D15 or S0-S2, respectively) into the input register. When
READ is high, the Write function is disabled.
S0 (Pin 32): Span I/O Bit 0. Pins S0, S1 and S2 are used
to program and to read back the output range of the DAC.
相关PDF资料 |
PDF描述 |
|---|---|
| AD8332ARUZ-R7 | IC AMP VAR GAIN 2CHAN 28TSSOP |
| VI-24J-IV-F3 | CONVERTER MOD DC/DC 36V 150W |
| AD8332ARUZ-RL | IC AMP VAR GAIN 2CHAN 28TSSOP |
| AD5328ARU | IC DAC 12BIT OCTAL W/BUF 16TSSOP |
| AD8332ACPZ-RL | IC AMP VAR GAIN 2CHAN 32LFCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC2751BCUHF-16#PBF | 功能描述:IC DAC 16BIT CUR OUT 38-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:SoftSpan™ 标准包装:47 系列:- 设置时间:2µs 位数:14 数据接口:并联 转换器数目:1 电压电源:单电源 功率耗散（最大）:55µW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:28-SSOP（0.209"，5.30mm 宽） 供应商设备封装:28-SSOP 包装:管件 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:* |
| LTC2751BCUHF-16#TRPBF | 功能描述:IC DAC 16BIT CUR OUT 38-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:SoftSpan™ 标准包装:47 系列:- 设置时间:2µs 位数:14 数据接口:并联 转换器数目:1 电压电源:单电源 功率耗散（最大）:55µW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:28-SSOP（0.209"，5.30mm 宽） 供应商设备封装:28-SSOP 包装:管件 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:* |
| LTC2751BIUHF-16#PBF | 功能描述:IC DAC 16BIT CUR OUT 38-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:SoftSpan™ 产品培训模块:Data Converter Fundamentals DAC Architectures 标准包装:750 系列:- 设置时间:7µs 位数:16 数据接口:并联 转换器数目:1 电压电源:双 ± 功率耗散（最大）:100mW 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-LCC（J 形引线） 供应商设备封装:28-PLCC（11.51x11.51） 包装:带卷 (TR) 输出数目和类型:1 电压，单极；1 电压，双极 采样率（每秒）:143k |
| LTC2751BIUHF-16#TRPBF | 功能描述:IC DAC 16BIT CUR OUT 38-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:SoftSpan™ 产品培训模块:Data Converter Fundamentals DAC Architectures 标准包装:750 系列:- 设置时间:7µs 位数:16 数据接口:并联 转换器数目:1 电压电源:双 ± 功率耗散（最大）:100mW 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-LCC（J 形引线） 供应商设备封装:28-PLCC（11.51x11.51） 包装:带卷 (TR) 输出数目和类型:1 电压，单极；1 电压，双极 采样率（每秒）:143k |
| LTC2751CUHF-12#PBF | 功能描述:IC DAC 12BIT CUR OUT 38-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:SoftSpan™ 产品培训模块:LTC263x 12-, 10-, and 8-Bit VOUT DAC Family 特色产品:LTC2636 - Octal 12-/10-/8-Bit SPI VOUT DACs with 10ppm/°C Reference 标准包装:91 系列:- 设置时间:4µs 位数:10 数据接口:MICROWIRE?，串行，SPI? 转换器数目:8 电压电源:单电源 功率耗散（最大）:2.7mW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-WFDFN 裸露焊盘 供应商设备封装:14-DFN-EP（4x3） 包装:管件 输出数目和类型:8 电压，单极 采样率（每秒）:* |
发布紧急采购，3分钟左右您将得到回复。