参数资料
型号: LTC3388IDD-1#PBF
厂商: LINEAR TECHNOLOGY CORP
元件分类: 稳压器
英文描述: 0.21 A SWITCHING REGULATOR, PDSO10
封装: 3 X 3 MM, LEAD FREE, PLASTIC, MO-229WEED-2, DFN-10
文件页数: 5/20页
文件大小: 282K
代理商: LTC3388IDD-1#PBF
LTC3388-1/LTC3388-3
13
338813f
OPERATION
Enable and Standby Modes
Two logic pins, EN and STBY, determine the operating
mode of the LTC3388-1/LTC3388-3. When EN is high and
STBY is low the synchronous buck converter is enabled
and will regulate the output if the input voltage is above
the programmed output voltage and above the UVLO
threshold. If EN is low the buck converter circuitry is
powered down to save quiescent current. The internal rail
generation circuits are kept alive and the voltages at VIN2
and CAP are maintained. When low, EN also shuts down
the PGOOD circuitry and pulls the PGOOD pin low. If EN
is high and the input falls below the UVLO threshold, the
buck converter is shut down.
While enabled, the LTC3388-1/LTC3388-3 can be placed
in standby mode by bringing STBY high. In standby mode
the buck converter is disabled, eliminating the quiescent
current used to run the buck circuitry. The PGOOD and
sleep comparators are kept alive to maintain the state of
the PGOOD pin.
The sleep comparator has lower quiescent current than the
PGOOD comparator and when the LTC3388-1/LTC3388-3
is in sleep mode the PGOOD comparator is shut down and
PGOOD is held high. The same occurs in standby mode.
If the LTC3388-1/LTC3388-3 was in sleep before entering
standby it will stay in sleep in standby, saving the quiescent
current of the PGOOD comparator. If VOUT falls below the
sleep falling threshold the PGOOD comparator will be
enabled. If VOUT falls below the PGOOD falling threshold
the PGOOD pin will be pulled low.
If STBY is driven high with EN low it will be ignored and
the LTC3388-1/LTC3388-3 will remain shut down.
If EN and STBY are driven high but near VIH or low but near
VIL, additional quiescent current may appear on VIN. This
additional quiescent current is typically 40nA and depends
on VIN and temperature. Driving EN or STBY to 0V or VIN2
will prevent additional quiescent current on VIN.
Figure 4 shows VOUT during a transition into and out of
standby. While in standby, the buck is off and VOUT is
quiet.
Figure 4. LTC3388-3 Standby Transient,
VOUT = 3.3V, ILOAD = 5mA
500μs/DIV
0V
VOUT
50mV/DIV
AC-COUPLED
VIN = 5.5V,
L = 22μH, COUT = 100μF
STANDBY TRANSIENT
STANDBY
5V/DIV
338813 F04
相关PDF资料
PDF描述
LTC3388IMSE-1#PBF 0.21 A SWITCHING REGULATOR, PDSO10
LTC3388EDD-1#PBF 0.21 A SWITCHING REGULATOR, PDSO10
LTC3388IMSE-3#TRPBF 0.21 A SWITCHING REGULATOR, PDSO10
LTC3388EDD-1#TRPBF 0.21 A SWITCHING REGULATOR, PDSO10
LTC3388EMSE-1#TRPBF 0.21 A SWITCHING REGULATOR, PDSO10
相关代理商/技术参数
参数描述
LTC3388IDD-3 制造商:Linear Technology 功能描述:
LTC3388IDD-3#PBF 功能描述:IC REG BUCK SYNC 50MA 10DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:1.2V,1.5V,1.8V,2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP,10-MSOP(0.118",3.00mm 宽)裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘
LTC3388IDD-3#TRPBF 功能描述:IC REG BUCK SYNC 50MA 10DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:1.2V,1.5V,1.8V,2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP,10-MSOP(0.118",3.00mm 宽)裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘
LTC3388IMSE-1#PBF 功能描述:IC REG BUCK SYNC 50MA 10MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:1.2V,1.5V,1.8V,2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP,10-MSOP(0.118",3.00mm 宽)裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘
LTC3388IMSE-1#TRPBF 功能描述:IC REG BUCK SYNC 50MA 10MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:1.2V,1.5V,1.8V,2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP,10-MSOP(0.118",3.00mm 宽)裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘