- 您现在的位置：买卖IC网 > PDF目录1829 > LTC3415EUHF#TRPBF (Linear Technology)IC REG BUCK SYNC ADJ 7A 38QFN PDF资料下载
参数资料
| 型号： | LTC3415EUHF#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 7/28页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 7A 38QFN |
| 标准包装： | 2,500 |
| 系列： | PolyPhase® |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.7 V ~ 5.5 V |
| 输入电压： | 2.5 V ~ 5.5 V |
| PWM 型： | 电流模式，混合 |
| 频率 - 开关： | 1.5MHz |
| 电流 - 输出： | 7A |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 38-WFQFN 裸露焊盘 |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 38-QFN（5x7） |
第1页第2页第3页第4页第5页第6页当前第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
LTC3415
PIN FUNCTIONS
SGND (Pin 2): Signal Ground. Return ground path for
all analog and low power circuitry. Single connection to
PGND on system board.
PLLLPF (Pin 3): Phase-Locked-Loop Lowpass Filter. The
PLL’s lowpass ?lter is tied to this pin. In spread spectrum
mode, placing a capacitor here to SGND controls the slew
rate from one frequency to the next. Alternatively, ?oating
this pin allows normal running frequency at 1.5MHz, tying
this pin to SV IN forces the part to run at 1.33 times its normal
frequency (2MHz), tying it to ground forces the frequency
to run at 0.67 times its normal frequency (1MHz).
PV IN (Pins 4, 5, 27, 28, 35, 36): Power V IN . Input voltage
to the on chip power MOSFETs. Must be closely decoupled
to PGND.
SW (Pins 6, 7, 8, 9, 23, 24, 25, 26): Switch Node Con-
nection to the Inductor. This pin swings from PV IN to
PGND.
MODE (Pin 10): Mode Select Input. Tying this pin high
enables Burst Mode operation. Tying this pin low enables
force continuous operation. Tying it to V IN /2 enables pulse-
skipping operation.
CLKIN (Pin 11): External Synchronization Input to Phase
Detector. This pin is internally terminated to SGND with a
50k resistor. The phase-locked-loop will force the internal
top power PMOS turn on to be synchronized with the
rising edge of the CLKIN signal. Connect this pin to SV IN
to enable spread spectrum modulation. During external
synchronization, make sure the PLLLPF pin is not tied to
V IN or GND.
PHMODE (Pin 12): Phase Selector Input. This pin deter-
mines the phase relationship between the internal oscil-
lator and CLKOUT. Tie it high for 2-phase operation, tie it
low for 3-phase operation, and tie it to V IN /2 for
4-phase operation.
PGND (Pins 13-19): Power Ground. Return path of internal
N-channel power MOSFETs. Connect this pin with the (–)
terminals of C IN and C OUT .
MGN (Pin 20): Margining Pin. Tying this pin to a voltage
between 0.5V and SV IN – 0.5V disables the margining
function and allows normal operation. Tying it high enables
positive margining (5, 10, or 15%). Tying it low enables
negative margining (–5, –10, or –15%).
BSEL (Pin 21): Margining Bit Select Pin. Tying BSEL low
selects ±5%, tying it high selects ±10%. Tying it to V IN /2
selects ±15%.
PGOOD (Pin 22): Output Power GOOD with Open-Drain
Logic. PGOOD is pulled to ground when the voltage on
the V FB pin is not within ±10% of its set point. Disabled
during margining and during slave mode operation (V FB
tied to V IN ).
V FB (Pin 29): Input to the error ampli?er that compares
the feedback voltage to the internal 0.6V reference voltage.
This pin is normally connected to a resistive divider from
the output voltage. In PolyPhase operation, tying V FB to
SV IN disables its own internal error ampli?er and connects
the master’s I TH voltage to its current comparator.
TRACK (Pin 30): Track Input Pin. This allows the user to
control the rise time of the output. Putting a voltage below
0.57V on this pin bypasses the reference input into the er-
ror ampli?er and servos the V FB pin to the TRACK voltage.
Above 0.57V, the tracking function stops and the internal
reference again controls the error ampli?er. During shut-
down, if TRACK is not tied to SV IN, then TRACK’s voltage
needs to be below 0.18V before the chip shuts down even
though RUN is already low. Do not ?oat this pin.
I TH (Pin 32): Error Ampli?er Output and Switching
Regulator Compensation Point. The current comparator’s
threshold increases with this control voltage. The normal
voltage range of this pin is from 0V to 1.5V. It’s also the
positive input to the internal I TH differential ampli?er. Tying
I TH to SV IN enables the internal compensation.
I THM (Pin 33): Negative Input to the Internal I TH Differential
Ampli?er. Tie this pin to SGND for single phase operation.
For PolyPhase, tie the master’s I THM to SGND while con-
necting all of the I THM pins together.
SV IN (Pin 34): Signal Input Voltage. Connect this pin to
PV IN through a 1Ω and 0.1μF lowpass ?lter.
RUN (Pin 37): Run Control Input. Tying this pin above
1.5V turns on the part.
CLKOUT (Pin 38): Output Clock Signal for PolyPhase
Operation. The phase of CLKOUT is determined by the
state of the PHMODE pin.
Exposed Pad (Pin 39): Power Ground. Must be connected
to electrical ground on PCB.
3415fa
7
相关PDF资料 |
PDF描述 |
|---|---|
| LTC3416EFE#TRPBF | IC REG BUCK SYNC ADJ 4A 20TSSOP |
| LTC3417AIFE-1#TRPBF | IC REG BUCK SYNC ADJ DL 20TSSOP |
| LTC3417AIFE-2#TRPBF | IC REG BUCK SYNC ADJ DL 20TSSOP |
| LTC3417EDHC#PBF | IC REG BUCK SYNC ADJ DL 16DFN |
| LTC3418EUHF#TRPBF | IC REG BUCK SYNC ADJ 8A 38QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC3416 | 制造商:LINEAR 制造商全称:LINEAR 功能描述:20V, 5A Synchronous Step-Down Regulator |
| LTC3416EFE | 功能描述:IC REG BUCK SYNC ADJ 4A 20TSSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LTC3416EFE#PBF | 功能描述:IC REG BUCK SYNC ADJ 4A 20TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON（1.45x1） 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2 |
| LTC3416EFE#TR | 功能描述:IC REG BUCK SYNC ADJ 4A 20TSSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LTC3416EFE#TRPBF | 功能描述:IC REG BUCK SYNC ADJ 4A 20TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
发布紧急采购，3分钟左右您将得到回复。