- 您现在的位置：买卖IC网 > PDF目录30770 > LTC3546EFE (LINEAR TECHNOLOGY CORP) DUAL SWITCHING CONTROLLER, 4000 kHz SWITCHING FREQ-MAX, PDSO28 PDF资料下载
参数资料
| 型号： | LTC3546EFE |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 稳压器 |
| 英文描述： | DUAL SWITCHING CONTROLLER, 4000 kHz SWITCHING FREQ-MAX, PDSO28 |
| 封装： | 4.40 MM, PLASTIC, TSSOP-28 |
| 文件页数： | 28/28页 |
| 文件大小： | 356K |
| 代理商： | LTC3546EFE |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页当前第28页
LTC3546
9
3546fb
PIN FUNCTIONS
BMC2 (Pin 1/Pin 4): Burst Mode Clamp for Channel 2.
Connect-ing this pin to an external voltage between 0V and
0.6V sets the Burst Mode clamp level. If this pin is pulled
to VCCA, an internal Burst Mode clamp level is used.
TRACK/SS2 (Pin 2/Pin 5): Tracking input for Channel 2
output or optional external soft-start input. VOUT2 will track
an external voltage at this pin. Leaving this pin oating
allows VOUT2 to start-up using the internal soft-start. An
external soft-start can be programmed by connecting a
capacitor between this pin and ground. External soft-start
ramp time must be greater than the internal soft-start time
of 1.2ms. Refer to the Applications Information section
for more details.
VFB2 (Pin 3/Pin 6): Feedback voltage from external resis-
tive divider from the Channel 2 regulator output. Nominal
voltage for this pin is 0.6V.
ITH2 (Pin 4/Pin 7): Error Amplier Compensation for Chan-
nel 2 Regulator. Peak current increases with an increase
in the voltage on this pin. Nominal voltage range for this
pin is 0V to 1.5V.
VCCD (Pin 5/Pin 8): Supply Pin for Internal Digital Cir-
cuitry.
RUN2 (Pin 6/Pin 9): Low Level Logic Input. Enable for
Channel 2. When pulled high, regulator is running. When
at 0V, regulator is off. When both RUN1 and RUN2 are at
0V the part is in shutdown.
VIN2 (Pin 7/Pin 10): Supply pin for 2A P-channel switch
which connects from VIN2 to SW2A/B.
VIN1 (Pin 8/Pin 11): Supply pin for 1A P-channel switch
which connects from VIN1 to SW1.
VIN1D (Pin 9/Pin 12): Supply pin for 1A dependent P-chan-
nel switch which connects from VIN1D to SW1D.
SW2A (Pin 10/Pin 13): Half of the switch node connec-
tion to the inductor for Channel 2. SW2A and SW2B must
be externally tied together. This pin swings from VIN2 to
PGND2.
SW2B (Pin 11/Pin 14): Half of the switch node connec-
tion to the inductor for Channel 2 SW2A and SW2B must
be externally tied together. This pin swings from VIN2 to
PGND2.
SW1D (Pin 12/Pin 15): The Dependent Switch Node
Connection. The pin is externally connected to SW1 for
a 2A/2A regulator or to SW2A/B for a 3A/1A regulator.
Internal circuitry detects which pin SW1D is externally
connected to, SW1 or SW2A/B. This pin swings from
VIN1D to PGND1D. SW1D switching will be controlled
by the output switch to which it is connected, i.e., SW1
or SW2A/SW2B. The dependant 1A power stage can be
disabled by oating the SW1D pin. The SW1D pin must
never be connected to VIN or GND. When disabled, SW1D
is pulled high internally.
SW1 (Pin 13/Pin 16): The switch node connection to the
Inductor for the Channel 1 regulator. This pin swings from
VIN1 to PGND1.
PGND1D (Pin 14/Pin 17): Ground for SW1D Switching
N-Channel Driver.
PGND1 (Pin 15/Pin 18): Ground for SW1 Switching N-
Channel Driver.
PGND2 (Pin 16/Pin 19): Ground for SW2A and SW2B
Switching N-Channel Driver.
RUN1 (Pin 17/Pin 20): Low Level Logic Input. Enable for
Channel 1. When pulled high, regulator is running. When
at 0V, regulator is off. When both RUN1 and RUN2 are at
0V the part is in shutdown.
PHASE (Pin 18/Pin 21): Low Level Logic Input. Selects
Channel 2 regulator switching phase with respect to
Channel 1 regulator switching. When pulled high, the
SW1 regulator and the SW2A/B regulator are in phase.
When PHASE is at 0V the SW1 regulator and the SW2A/B
regulator are switching 180° out-of-phase.
ITH1 (Pin 19/Pin 22): Error Amplier Compensation for
Channel 1. Peak current increases with an increase in the
voltage on this pin. Nominal voltage range for this pin is
0V to 1.5V.
(UFD/FE)
相关PDF资料 |
PDF描述 |
|---|---|
| LTC3546IFE#TRPBF | DUAL SWITCHING CONTROLLER, 4000 kHz SWITCHING FREQ-MAX, PDSO28 |
| LTC3546IFE#TR | DUAL SWITCHING CONTROLLER, 4000 kHz SWITCHING FREQ-MAX, PDSO28 |
| LTC3554EUD-2#TRPBF | 0.6 A BATTERY CHARGE CONTROLLER, 2590 kHz SWITCHING FREQ-MAX, PQCC20 |
| LTC3554EUD#PBF | 0.6 A BATTERY CHARGE CONTROLLER, 2590 kHz SWITCHING FREQ-MAX, PQCC20 |
| LTC3565EDD#PBF | 2.5 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PDSO10 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC3546EFE#PBF | 功能描述:IC REG BUCK SYNC ADJ DL 28TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON（1.45x1） 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2 |
| LTC3546EFE#PBF | 制造商:Linear Technology 功能描述:IC DUAL SYNC STEP-DOWN DC/DC REG 28-TSSO |
| LTC3546EFE#TRPBF | 功能描述:IC REG BUCK SYNC ADJ DL 28TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LTC3546EFEPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Synchronous, 3A/1A or 2A/2A Confi gurable Step-Down DC/DC Regulator |
| LTC3546EFETRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Synchronous, 3A/1A or 2A/2A Confi gurable Step-Down DC/DC Regulator |
发布紧急采购，3分钟左右您将得到回复。