- 您现在的位置：买卖IC网 > PDF目录44991 > LTC3549EDCB#TR (LINEAR TECHNOLOGY CORP) 0.6 A SWITCHING REGULATOR, 2700 kHz SWITCHING FREQ-MAX, PDSO6 PDF资料下载
参数资料
| 型号： | LTC3549EDCB#TR |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 稳压器 |
| 英文描述： | 0.6 A SWITCHING REGULATOR, 2700 kHz SWITCHING FREQ-MAX, PDSO6 |
| 封装： | 2 X 3 MM, 0.75 MM HEIGHT, PLASTIC, MO-229, DFN-6 |
| 文件页数： | 5/16页 |
| 文件大小： | 352K |
| 代理商： | LTC3549EDCB#TR |
LTC3549
13
3549f
APPLICATIO S I FOR ATIO
WU
U
Board Layout Considerations
When laying out the printed circuit board, the following
checklist should be used to ensure proper operation of
the LTC3549. These items are also illustrated graphically
in the layout diagram of Figure 3. Check the following in
your layout.
1. Does the capacitor CIN connect to the power VIN (Pin 1)
and GND (Pins 2, 7) as close as possible? This capacitor
provides the AC current to the internal power MOSFETs
and their drivers.
2. Are the COUT and L1 closely connected? The (–) plate of
COUT returns current to GND and the (–) plate of CIN.
3. The resistor divider, R1 and R2, must be connected
between the (+) plate of COUT and a ground sense line
terminated near GND (Exposed Pad). The feedback
Figure 3a. Buck Regulator Top Layer
signals VFB should be routed away from noisy compo-
nents and traces, such as the SW line (Pin 3), and its
trace should be minimized.
4. Keep sensitive components away from the SW pins.
The input capacitor CIN and the resistors R1 and R2
should be routed away from the SW traces and the
inductors.
5. A ground plane is preferred, but if not available, keep
the signal and power grounds segregated with small
signal components returning to the GND pin at one
point. They should not share the high current path of
CIN or COUT.
6. Flood all unused areas on all layers with copper. Flooding
with copper will reduce the temperature rise of power
components. These copper areas should be connected
to VIN or GND.
Figure 3b. Buck Regulator Bottom Layer
相关PDF资料 |
PDF描述 |
|---|---|
| LTC3553EUD#TRPBF | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQCC20 |
| LTC3553EUD#PBF | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQCC20 |
| LTC3554EPD#TRPB | 0.5 A BATTERY CHARGE CONTROLLER, 1295 kHz SWITCHING FREQ-MAX, PQCC20 |
| LTC3560IS6#TRPBF | 2.1 A SWITCHING REGULATOR, 2700 kHz SWITCHING FREQ-MAX, PDSO6 |
| LTC3563EDC | 1.75 A SWITCHING REGULATOR, 2700 kHz SWITCHING FREQ-MAX, PDSO6 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC3550 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Input USB/AC Adapter Li-Ion Battery Charger with 600mA Buck Converter |
| LTC3550-1 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Input USB/AC Adapter Li-Ion Battery Charger with 600mA Buck Converter |
| LTC3550EDHC | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Input USB/AC Adapter Li-Ion Battery Charger with 600mA Buck Converter |
| LTC3550EDHC#PBF | 功能描述:IC CHARGER BATT DUAL 16-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN（6x3）裸露焊盘 包装:管件 |
| LTC3550EDHC#TRPBF | 功能描述:IC CHARGER BATT DUAL 16-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN（6x3）裸露焊盘 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。