参数资料
型号: LTC3615EFE-1#TRPBF
厂商: LINEAR TECHNOLOGY CORP
元件分类: 稳压器
英文描述: SWITCHING REGULATOR, PDSO24
封装: 4.40 MM, LEAD FREE, PLASTIC, TSSOP-24
文件页数: 5/32页
文件大小: 585K
代理商: LTC3615EFE-1#TRPBF
LTC3615/LTC3615-1
13
3615fa
Burst Mode Operation—External Clamp
Connecting the MODE pin to a voltage in the range of 0.5V
to 0.8V enables Burst Mode operation with external clamp.
During this mode of operation, the minimum voltage on the
ITH pin is externally set by the voltage on the MODE pin.
It is recommended to use Burst Mode operation with the
internal clamp for ambient temperatures above 85°C.
Pulse-Skipping Mode Operation
Pulse-skipping mode is similar to Burst Mode operation,
but the LTC3615 does not disable power to the internal
circuitry during sleep mode. This improves output voltage
ripple but uses more quiescent current compromising
light load efciency.
Connecting the MODE pin to SVIN enables pulse-skipping
mode. As the load current decreases, the peak inductor
current will be determined by the voltage on the ITH pin
until the ITH voltage drops below 450mV, corresponding
to 0A. At this point switching cycles will be skipped to
keep the output voltage in regulation.
Forced Continuous Mode Operation
In forced continuous mode the inductor current is con-
stantly cycled which creates a minimum output voltage
ripple at all output current levels.
Connecting the MODE pin, to a voltage in the range of
1.1V to SVIN 0.58 will select the forced continuous mode
operation.
The forced continuous mode must be used if the output
is required to sink current.
Dropout Operation
As the input supply voltage approaches the output voltage,
the duty cycle increases toward the maximum on-time.
Further reduction of the supply voltage forces the main
switch to remain on for more than one cycle, eventually
reaching 100% duty cycle. The output voltage will then be
determined by the input voltage minus the voltage drop
across the internal P-channel MOSFET and the inductor.
OPERATION
Figure 2. Modes of Operation
LTC3615
SVIN
VIN
MODE
SGND
0V
2a. Burst Mode Operation
Internally Controlled
LTC3615
SVIN
VIN
MODE
SGND
0V
2c. Pulse-Skipping Mode
LTC3615
SVIN
VIN
MODE
SGND
0V
RM1
RM2
3615 F02
2d. Forced Continuous Mode
2b. Burst Mode Operation
Externally Controlled
LTC3615
SVIN
VIN
MODE
SW1
FB1
SGND
0V
VOUT1
RM1
RM2
相关PDF资料
PDF描述
LTC3615IUF-1#PBF SWITCHING REGULATOR, PQCC24
LTC3615EUF#PBF SWITCHING REGULATOR, PQCC24
LTC3615EFE#PBF SWITCHING REGULATOR, PDSO24
LTC3615IFE-1#PBF SWITCHING REGULATOR, PDSO24
LTC3615EUF#TRPBF SWITCHING REGULATOR, PQCC24
相关代理商/技术参数
参数描述
LTC3615EUF#PBF 功能描述:IC REG BUCK SYNC ADJ 3A DL 24QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON(1.45x1) 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2
LTC3615EUF#TRPBF 功能描述:IC REG BUCK SYNC ADJ 3A DL 24QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压(升压) 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型,TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT
LTC3615EUF-1#PBF 功能描述:IC REG BUCK SYNC ADJ 3A DL 24QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON(1.45x1) 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2
LTC3615EUF-1#TRPBF 功能描述:IC REG BUCK SYNC ADJ 3A DL 24QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压(升压) 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型,TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT
LTC3615EUFPBF 制造商:Linear Technology 功能描述:Dual 4MHz 3A Synch Step-Down DC/DC QFN24