参数资料
| 型号： | LTC4413EDD#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 11/12页 |
| 文件大小： | 0K |
| 描述： | IC IDEAL DIODE DUAL 10-DFN |
| 标准包装： | 121 |
| 应用： | 手持/移动设备 |
| FET 型： | P 沟道 |
| 输出数： | 2 |
| 内部开关： | 是 |
| 延迟时间 - 开启： | 11µs |
| 延迟时间 - 关闭： | 2µs |
| 电源电压： | 2.5 V ~ 5.5 V |
| 电流 - 电源： | 25µA |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-WFDFN 裸露焊盘 |
| 供应商设备封装： | 10-DFN（3x3） |
| 包装： | 管件 |
| 产品目录页面： | 1338 (CN2011-ZH PDF) |
LTC4413
APPLICATIONS INFORMATION
If the AUX is present when a wall adapter is applied, as
the resistive divider to ENBB rises through the turn-off
threshold, the STAT pin voltage falls and MP1 conducts,
allowing the wall adapter to power the load. When the wall
adapter is removed while the AUX supply is present, the
load voltage falls until the voltage divider at the ENBB pin
falls through its turn-on threshold. Once this occurs, the
LTC4413 automatically connects the AUX supply to the load
when the AUX voltage exceeds the output voltage, causing
the STAT voltage to rise and disabling the external PFET.
When an AUX supply is attached, the voltage divider at
ENBA (R4 and R5) disconnects the battery from the load,
and the auxiliary supply provides load current, unless a
wall adapter is present as described earlier. If the auxiliary
supply is removed, the battery may again power the load,
depending on if a wall adapter is present.
Multiple Battery Charging
Figure 6 illustrates an application circuit for automatic dual
battery charging from a single charger. Whichever battery
has the lower voltage will receive the larger charging current
STAT IS HIGH
until both battery voltages are equal, then both are charged.
While both batteries are charging simultaneously, the
higher capacity battery gets proportionally higher current
from the charger. For Li-Ion batteries, both batteries achieve
the ?oat voltage minus the forward regulation voltage of
20mV. This concept can apply to more than two batteries.
The STAT pin provides information as to when battery 1
is being charged. For intelligent control, the ENBA/ENBB
pin inputs can be used with a microcontroller as shown
in Figure 4.
Automatic Switchover from a Battery to a Wall
Adapter and Charger
Figure 7 illustrates the LTC4413 performing the function
of automatically switching a load over from a battery to a
wall adapter while controlling an LTC4059 battery charger.
When no wall adapter is present, the LTC4413 connects
the load at OUTA from the Li-Ion battery at INA. In this
condition, the STAT voltage is high, thereby disabling the
battery charger. If a wall adapter of a higher voltage than
the battery is connected to INB, the load voltage rises as
the second ideal diode conducts. As soon as the OUTA
voltage exceeds INA voltage, the BAT is disconnected
BATTERY
CHARGER
INPUT
LTC4413
9
STAT
IDEAL
1 INA OUTA 10
IDEAL
5 INB OUTB 6
470k WHEN BAT1
IS CHARGING
LOAD1
BAT1
LOAD2
from the load and the STAT voltage falls, turning on the
LTC4059 battery charger and beginning a charge cycle. If
the wall adapter is removed, the voltage at INB collapses
until it is below the load voltage. When this occurs, the
LTC4413 automatically reconnects the battery to the load
2
4
3,11
ENBA
ENBB
GND
4413 F06
BAT2
and the STAT voltage rises, disabling the LTC4059 battery
charger. One major bene?t of this circuit is that when a
wall adapter is present, the user may remove the battery
and replace it without disrupting the load.
Figure 6
LTC4413
STAT
9
LTC4059
V CC BAT
IDEAL
1 INA OUTA 10
R1
560k
ENB PROG
Li CC GND
R2
100k
1-CELL
Li-Ion
2
4
3,11
ENBA
ENBB
GND
IDEAL
WALL
ADAPTER
C1: C0805C106K8PAC
C1
5 INB OUTB 6
C2
TO LOAD
C2: C1206C475K8PAC
10μF
4.7μF
4413 F07
Figure 7
4413fc
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-
tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.
11
相关PDF资料 |
PDF描述 |
|---|---|
| LTC4414EMS8#PBF | IC CNTRLR POWERPATH 8-MSOP |
| LTC4415EMSE#PBF | IC DUAL 4A DIODES 16-MSOP |
| LTC4416EMS#PBF | IC CTLR POWERPATH 10-MSOP |
| LTC5100EUF#TRPBF | IC DRIVER VCSEL 3.2GBPS 16QFN |
| LTC660CS8#TRPBF | IC REG DBL INV ADJ 0.1A 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4414EMS8 | 制造商:Linear Technology 功能描述:Power Controller 8-Pin MSOP |
| LTC4414EMS8#PBF | 功能描述:IC CNTRLR POWERPATH 8-MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - O 圈控制器 系列:PowerPath™ 标准包装:1,000 系列:- 应用:电池备份，工业/汽车，大电流开关 FET 型:- 输出数:5 内部开关:是 延迟时间 - 开启:100ns 延迟时间 - 关闭:- 电源电压:3 V ~ 5.5 V 电流 - 电源:250µA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC N 包装:带卷 (TR) |
| LTC4414EMS8#TR | 制造商:Linear Technology 功能描述:Power Controller 8-Pin MSOP T/R |
| LTC4414EMS8#TRPBF | 功能描述:IC CNTRLR POWERPATH 8-MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - O 圈控制器 系列:PowerPath™ 标准包装:1,000 系列:- 应用:电池备份，工业/汽车，大电流开关 FET 型:- 输出数:5 内部开关:是 延迟时间 - 开启:100ns 延迟时间 - 关闭:- 电源电压:3 V ~ 5.5 V 电流 - 电源:250µA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC N 包装:带卷 (TR) |
| LTC4414IMS8#PBF | 功能描述:IC CNTRLR POWERPATH 8-MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - O 圈控制器 系列:PowerPath™ 标准包装:1,000 系列:- 应用:电池备份，工业/汽车，大电流开关 FET 型:- 输出数:5 内部开关:是 延迟时间 - 开启:100ns 延迟时间 - 关闭:- 电源电压:3 V ~ 5.5 V 电流 - 电源:250µA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC N 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。