- 您现在的位置：买卖IC网 > PDF目录1834 > LTC6802IG-1#TRPBF (Linear Technology)IC MONITOR BATT STACK MC 44-SSOP PDF资料下载
参数资料
| 型号： | LTC6802IG-1#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 13/38页 |
| 文件大小： | 0K |
| 描述： | IC MONITOR BATT STACK MC 44-SSOP |
| 标准包装： | 2,000 |
| 功能： | 电池监控器 |
| 电池化学： | 锂离子（Li-Ion） |
| 电源电压： | 4 V ~ 50 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 44-FSOP（0.209"，5.30mm 宽） |
| 供应商设备封装： | 44-SSOP |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页当前第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页
LTC6802-1
OPERATION
C4
LTC6802-1
pulled down by the 100μA current source during the B3
cell measurement AND during the B4 cell measurement.
This will tend to decrease the B3 measurement result and
B4
C3
increase the B4 measurement result relative to the normal
B3
C2
C1
V –
MUX
100μA
STCVAD command. The biggest change is observed in the
B4 measurement when C3 is open. So, the best method to
detect an open wire at input C3 is to look for an increase
in the measurement of the cell connected between inputs
C3 and C4 (cell B4).
Thus the following algorithm can be used to detect an
Figure 2. Open Connection
68021 F02
LTC6802-1
open connection to cell pin CN:
(1) Issue a STCVAD command (ADC convert without 100μA
current sources).
(2) Issue a RDCV command and store all cell measure-
ments into array CELLA(N).
C4
B4
C F4
C3
(3) Issue a STOWAD command (ADC convert with 100μA
current sources).
B3
C F3
C2
MUX
(4) Issue a RDCV command and store all cell measure-
C1
ments into array CELLB(N).
V –
100μA
(5) For each value of N from 1 to 11:
If CELLB(N+1) – CELLA(N+1) ≥ +200mV, then CN is
68021 F03
Figure 3. Open Connection with RC Filtering
Figure 3 shows an open connection at the same point in
the cell stack as Figure 2, but this time there is an external
filter network still connected to C3. Depending on the value
of the capacitor remaining on C3, a normal measurement
of B3 and B4 may not give near-zero readings, since the
C3 pin is not truly open. In fact, with a large external ca-
pacitance on C3, the C3 voltage will be charged midway
between C2 and C4 after several cycles of measuring cells
B3 and B4. Thus the measurements for B3 and B4 may
indicate a valid cell voltage when in fact the exact state of
B3 and B4 is unknown.
To reliably detect an open connection, the command
STOWAD is provided. With this command, two 100μA
current sources are connected to the ADC inputs and
turned on during all cell conversions. Referring again to
Figure 3, with the STOWAD command, the C3 pin will be
open, otherwise it is not open.
The +200mV threshold is chosen to provide tolerance for
errors in the measurement with the 100μA current source
connected. Even without an open connection there is al-
ways some difference between a cell measured with and
without the 100μA current source because of the IR drop
across the finite resistance of the MUX switches. On the
other hand, with capacitors larger than 0.1μF remaining
on an otherwise open C pin, the 100μA current source
may not be enough to move the open C pin 200mV with
a single STOWAD command. If the STOWAD command
is repeated several times, the large external capacitor will
discharge enough to create a 200mV change in cell read-
ings. To detect an open connection with larger than 0.1μF
capacitance still on the pin, one must repeat step (3) above
a number of times before proceeding to step (4).
The algorithm above determines if the CN pin is open
based on measurements of the N+1 Cell. For example, in
a 12-cell system, the algorithm finds opens on pins C1
68021fa
13
相关PDF资料 |
PDF描述 |
|---|---|
| LTC6803HG-1#TRPBF | IC MONITOR BATT STACK 44-SSOP |
| LTC692CN8 | IC MPU SUPERVISORY CIRCUIT 8-DIP |
| LTC6943HGN#TRPBF | IC BUILDNG BLK SWCAP DUAL 16SSOP |
| LTC695ISW#TRPBF | IC MPU SUPERVISRY CIRCUIT 16SOIC |
| LTC699IN8#PBF | IC MPU SUPERVISORY CIRCUIT 8-DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC6802IG-2 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Multicell Addressable Battery Stack Monitor |
| LTC6802IG-2#3ZZPBF | 制造商:Linear Technology 功能描述: |
| LTC6802IG-2#PBF | 功能描述:IC MONITOR BATT STACK 44-SSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 其它有关文件:STC3100 View All Specifications 特色产品:STC3100 - Battery Monitor IC 标准包装:4,000 系列:- 功能:燃料，电量检测计/监控器 电池化学:锂离子（Li-Ion） 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-MiniSO 包装:带卷 (TR) 其它名称:497-10526-2 |
| LTC6802IG-2#PBF | 制造商:Linear Technology 功能描述:IC BATTERY MONITOR LI-ION 50V SSOP44 |
| LTC6802IG-2#TRPBF | 功能描述:IC MONITOR BATT STACK 44-SSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 功能:电池监控器 电池化学:碱性，锂离子，镍镉，镍金属氢化物 电源电压:1 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-6 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。