参数资料
型号: LTC6990IS6#TRPBF
厂商: Linear Technology
文件页数: 11/30页
文件大小: 0K
描述: IC OSC SILICON 1MHZ TSOT23-6
产品培训模块: TimerBlox Family Timing Devices
特色产品: TimerBlox?
标准包装: 2,500
系列: TimerBlox®
类型: 振荡器 - 硅
频率: 488Hz ~ 1MHz
电源电压: 2.25 V ~ 5.5 V
电流 - 电源: 235µA
工作温度: -40°C ~ 85°C
封装/外壳: SOT-23-6 细型,TSOT-23-6
包装: 带卷 (TR)
供应商设备封装: TSOT-23-6
安装类型: 表面贴装
配用: DC1562A-A-ND - BOARD EVAL LTC6990
LTC6990
19
6990fc
For more information www.linear.com/LTC6990
Figure 14. Digitally Controlled Oscillator with VSET Variation Eliminated
6990 F14
LTC6990
OE
GND
SET
OUT
V+
DIV
C1
0.1F
R1
R2
RSET
V+
RVCO
+
V+
1/2
LTC6078
LTC1659
V+
VCC
REF
GND
VOUT
P
DIN
CLK
CS/LD
fOUT =
1MHz 50k
NDIV RVCO
1
+
RVCO
RSET
DIN
4096
DIN = 0 to 4095
Additionally, by choosing the VCO’s specifications
shrewdly, the frequency error (in percent) due to VSET
variation is reduced to VSET/VSET = ±3%. To realize this
improvement, the design must abide by three conditions.
First, the VIN voltage must be positive throughout the
range. Second, choose VMAX/VMIN ≥ fMAX/fMIN. Last,
choose RVCO/RSET ≥ R4/R3.
Figure 13 shows a design similar to the previous design
example where the VMIN voltage is now specified to be
0.4V. This satisfies the VMAX/VMIN ≥ fMAX/fMIN condition
and the design assures that the output frequency error
due to VSET variation is only ±3%.
Eliminating VSET Error Effects with DAC Frequency
Control
Many DACs allow for the use of an external reference.
If such a DAC is used to provide the VCTRL voltage, the
VSET error is eliminated by buffering VSET and using it as
the DAC’s reference voltage, as shown in Figure 14. The
DAC’s output voltage now tracks any VSET variation and
eliminates it as an error source. The SET pin cannot be
tied directly to the reference input of the DAC because
the current drawn by the DAC’s REF input would affect
the frequency.
APPLICATIONS INFORMATION
ISET Extremes (Master Oscillator Frequency Extremes)
Pushing ISEToutsideoftherecommended1.25Ato20A
range forces the master oscillator to operate outside of the
62.5kHz to 1MHz range in which it is most accurate. The
oscillator will still function with reduced accuracy in its
extendedrange(seetheElectricalCharacteristicssection).
The LTC6990 is designed to function normally for ISET
as low as 1.25A. At approximately 500nA, the oscillator
output will be frozen in its current state. For NDIV = 1 or 2,
OUT will halt in a low state. But for larger divider ratios,
it could halt in a high or low state. This avoids introduc-
ing short pulses while modulating a very low frequency
output. Note that the output will not be
disabled as when
OE is low (e.g. the output will not enter a high impedance
state if Hi-Z = 1).
At the other extreme, the master oscillator frequency can
reach 2MHz for ISET = 40μA (RSET = 25k). It is not recom-
mended to operate the master oscillator beyond 2MHz
because the accuracy of the DIV pin ADC will suffer.
相关PDF资料
PDF描述
LTC6992HDCB-1#TRMPBF IC OSC SILICON 1MHZ 6-DFN
LTC6990HDCB#TRMPBF IC OSC SILICON 1MHZ 6DFN
V375B12M300BL CONVERTER MOD DC/DC 12V 300W
V375B12M300BF3 CONVERTER MOD DC/DC 12V 300W
V375A8M300BF2 CONVERTER MOD DC/DC 8V 300W
相关代理商/技术参数
参数描述
LTC6990MPS6#PBF 制造商:Linear Technology 功能描述:SC-Timing, Cut Tape VCO with Confirgurable Gain and Voltage Range, MP
LTC6990MPS6#TRMPBF 功能描述:IC VCO CONFIG GAIN/VOLT TSOT23-6 RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 可编程计时器和振荡器 系列:TimerBlox® 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:45 系列:- 类型:温度 - 补偿晶体振荡器(TCXO) 计数:- 频率:25MHz 电源电压:3.135 V ~ 3.465 V 电流 - 电源:1.5mA 工作温度:-40°C ~ 85°C 封装/外壳:16-SOIC(0.295",7.50mm 宽) 包装:管件 供应商设备封装:16-SOIC W 安装类型:表面贴装
LTC6990MPS6#TRPBF 功能描述:IC VCO CONFIG GAIN/VOLT TSOT23-6 RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 可编程计时器和振荡器 系列:TimerBlox® 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:45 系列:- 类型:温度 - 补偿晶体振荡器(TCXO) 计数:- 频率:25MHz 电源电压:3.135 V ~ 3.465 V 电流 - 电源:1.5mA 工作温度:-40°C ~ 85°C 封装/外壳:16-SOIC(0.295",7.50mm 宽) 包装:管件 供应商设备封装:16-SOIC W 安装类型:表面贴装
LTC6991 制造商:LINER 制造商全称:Linear Technology 功能描述:TimerBlox: Resettable, Low Frequency Oscillator
LTC6991CDCB#TRMPBF 功能描述:IC OSC SILICON 977HZ 6-DFN RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 可编程计时器和振荡器 系列:TimerBlox® 标准包装:3,000 系列:- 类型:振荡器 - 晶体 计数:- 频率:- 电源电压:2.3 V ~ 5.5 V 电流 - 电源:1.07mA 工作温度:-30°C ~ 80°C 封装/外壳:SOT-665 包装:带卷 (TR) 供应商设备封装:SS迷你型-5D 安装类型:表面贴装 其它名称:AN8955SSMTXLTR