- 您现在的位置：买卖IC网 > PDF目录67759 > LV8773 (SANYO SEMICONDUCTOR CO LTD) STEPPER MOTOR CONTROLLER, DIP28 PDF资料下载
参数资料
| 型号： | LV8773 |
| 厂商： | SANYO SEMICONDUCTOR CO LTD |
| 元件分类： | 运动控制电子 |
| 英文描述： | STEPPER MOTOR CONTROLLER, DIP28 |
| 封装： | 0.500 INCH, DIP-28 |
| 文件页数： | 2/14页 |
| 文件大小： | 183K |
| 代理商： | LV8773 |
LV8773
No.A1961-10/26
(7) Output short-circuit protection function
This IC incorporates an output short-circuit protection circuit that, when the output has been shorted by an event such
as shorting to power or shorting to ground, sets the output to the standby mode and turns on the warning output in
order to prevent the IC from being damaged. In the channels 1 and 2 operate independently. (Even if the output of
channel 1 has been short-circuited, channel 2 will operate normally.)
(7-1) Output short-circuit protection operation changeover function
Changeover to the output short-circuit protection of IC is made by the setting of EMM pin.
EMM
State
Low or Open
Latch method
High
Auto reset method
(7-2) Latch type
In the latch mode, when the output current exceeds the detection current level, the output is turned OFF, and this state
is held.
The detection of the output short-circuited state by the IC causes the output short-circuit protection circuit to be
activated.
When the short-circuited state continues for the period of time set using the internal timer (approximately 2
μs), the
output in which the short-circuiting has been detected is first set to OFF. After this, the output is set to ON again as
soon as the timer latch time (Tcem) described later has been exceeded, and if the short-circuited state is still detected,
all the outputs of the channel concerned are switched to the standby mode, and this state is held.
This state is released by setting ST to low.
Short-circuit
Short-
circuit
Short-circuit
detection state
CEM voltage
H-bridge
output state
Internal counter
1st counter
start
1st counter
stop
1st counter
start
1st counter
end
2nd counter
start
2nd counter
end
Release
Threshold voltage
Output OFF
Output ON
Standby state
相关PDF资料 |
PDF描述 |
|---|---|
| LX1661CD-TR | 1.5 A SWITCHING CONTROLLER, PDIP16 |
| LX1660CD-TR | 1.5 A SWITCHING CONTROLLER, PDSO16 |
| LX1671-CPW | 1 A SWITCHING CONTROLLER, 345 kHz SWITCHING FREQ-MAX, PDSO38 |
| LX1671-CLQ | 1 A SWITCHING CONTROLLER, 345 kHz SWITCHING FREQ-MAX, PQCC38 |
| LX1671-CPWTR | 1 A SWITCHING CONTROLLER, 345 kHz SWITCHING FREQ-MAX, PDSO38 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LV8773-E | 功能描述:马达/运动/点火控制器和驱动器 PRINTER RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
| LV8773-E | 制造商:ON Semiconductor 功能描述:OPTOCOUPLERS; Leaded Process Compatible:No; Peak Reflow Compatible (260 C):No ;RoHS Compliant: No |
| LV8773GEVB | 功能描述:电源管理IC开发工具 EVM FOR LV8773 RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| LV8773Z-E | 功能描述:马达/运动/点火控制器和驱动器 RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
| LV8800C | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Optoelectronic |
发布紧急采购，3分钟左右您将得到回复。