参数资料
型号: M30100M6T-XXXFP
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP32
封装: 7 X 7 MM, 0.80 MM PITCH, PLASTIC, LQFP-32
文件页数: 34/163页
文件大小: 1678K
代理商: M30100M6T-XXXFP
Under
development
Tentative Specifications REV.E
Specifications in this manual are tentative and subject to change.
Mitsubishi microcomputers
M30100/M30102 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Usage precaution
129
Stop Mode
(1) After returning from stop mode, an unexpected operation may occur (for example, undefined instruction
interrupt, BRK instruction interrupt, etc.).
Execute a JMP.B instruction after an instruction to write data to the all clock stop control bit. A program
example is described as follows:
MOV.B:S
#21H, CM1 ; writing to the all clock stop control bit to “1”(stop mode)
JMP.B
L1
L1 :
NOP
Interrupts
(1) Reading Address 0 by Firmware
Please do not read address 0 by firmware. In the CPU's interrupt processing sequence, when a
maskable interrupt occurs, the interrupt information (interrupt no. and interrupt request level) are read
from address 0. This read in turn, clears the interrupt request bit to "0" even pending with higher request
level. Reading address 0 by firmware may cause interrupt cancellation or unexpected interrupts so
please do not read address 0 by firmware.
(2) Stack Pointer
Set the value of the stack pointer before accepting interrupts. Immediately after a reset, the value of the
stack pointer is 000016. Accepting an interrupt before setting a value of the stack pointer may produce
unpredictable results (runaway program, etc.) Make sure that you set the value of the stack pointer
before accepting interrupts.
(3) External interrupts
Clear the interrupt request bit to "0" when the INT0 - INT3 polarity is changed. The reason being is that
an interrupt request may be generated when the polarity is changed.
(4) Rewriting the Interrupt Control Register
When rewriting the Interrupt Control Register, do it at a point where it does not generate an interrupt
request for that register. If there is a possibility that an interrupt may occur, disable the interrupt before
rewriting. Examples are shown below.
Example 1:
INT_SWITCH1:
FCLR
I
; Disable interrupts.
AND.B
#00h, 0055h
; Clear T1IC int. priority level and int. request bit.
NOP
;
NOP
FSET
I
; Enable interrupts.
相关PDF资料
PDF描述
M30218MC-AXXXFP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP100
M30218FCFP 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP100
M30245MC-XXXGP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100
M30245MC-XXXGP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100
M30245FCGP 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
M30100T3-RPD-E 制造商:Renesas Electronics Corporation 功能描述:DEV EMULATOR POD M16C/10 SERIES - Bulk
M30100T-PTC 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Converter for Connecting 32-pin 0.8mm-pitch QFP for M30100T-PRB (for M16C/10 Group M30100)
M30-1010046 功能描述:集管和线壳 1.25MM FEMALE CRIMP TIN PK OF 105 RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M3010102636207.32LLZZ 制造商:3M Electronic Products Division 功能描述:QUOTE # V05-0068
M30102 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER