参数资料
型号: M34559G6FP
元件分类: 微控制器/微处理器
英文描述: 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP52
封装: 10 X 10 MM, 0.65 MM PITCH, PLASTIC, LQFP-52
文件页数: 6/93页
文件大小: 1810K
代理商: M34559G6FP
CLRC663
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2011. All rights reserved.
Preliminary data sheet
COMPANY PUBLIC
Rev. 3.1 — 26 September 2011
171131
103 of 126
NXP Semiconductors
CLRC663
Contactless reader IC
18. CLRC663 Command set
18.1 General description
The behavior is determined by a state machine capable to perform a certain set of
commands. By writing the according command-code to register Command_Reg the
command is executed.
Arguments and/or data necessary to process a command, are exchanged via the FiFo
buffer.
18.2 General behavior
A data transmission of the TxEncoder can be started by a command. When started,
the communication is executed as defined in the TxFrameCon register. Therefore a
communication frame can consist of a start-symbol, a data-stream, and followed by
an end-symbol.
Each command that needs a certain number of arguments will start processing only
when it has received the correct number of arguments via the FiFo buffer.
The FiFo buffer is not cleared automatically at command start. Therefore, it is also
possible to write the command arguments and/or the data bytes into the FiFo buffer
and start the command afterwards.
Each command may be interrupted by the host by writing a new command code into
register Command_Reg e.g.: the Idle-Command.
18.3 CLRC663 commands overview
Table 237. Command overview
Command
No.
Parameter
Short description
Idle
0.0000
00h
no
no action, cancels current command execution
LPCD
0.0001
01h
no
low power card detection
LoadKey
0.0010
02h
MIFARE key (6 bytes)
reads a key from FiFo buffer ant puts it into Key
buffer
MFAuthent
0.0011
03h
authentication command code (60h,
61h), block address
performs the MIFARE standard authentication in
MIFARE read/write mode only
AckReq
0.0100
04h
no
performs a query, an Ack and a Req-Rn for
ISO/IEC18000-3 Mode 3
Receive
0.0101
05h
no
activates the receive circuit
Transmit
0.0110
06h
no
transmits data from the FiFo buffer
Transceive
0.0111
07h
no
transmits data from the FiFo buffer and
automatically activates the receiver after
transmission finished
WriteE2
0.1000
08h
address (2 bytes, 0000h - 1FFFh),
data (1 byte)
gets one byte from FiFo buffer and writes it to the
internal E2Prom
WriteE2Pages 0.1001
09h
page Address (1 byte, 00h - 7Fh),
data (up to 64 bytes)
gets up to 64 bytes from FiFo buffer and writes it to
the internal E2Prom
ReadE2
0.1010
0Ah
address (2 bytes, 0000h - 1FFFh),
length [1 byte, 01h (= 1 byte) - 00h
(= 256 byte)]
reads data from the E2Prom and puts it into the
FiFo buffer
相关PDF资料
PDF描述
M34571GD-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24
M34571G6-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24
M34571GDFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24
M34571G4FP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24
M34571G6FP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24
相关代理商/技术参数
参数描述
M34559G6-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M3455AG8FP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M3455AG8-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M3455AGCFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M3455AGC-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER